Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

So I went to Harbor Freight this afternoon

Featured Replies

To look at their oscillating spindle sander. It is on sale, with coupon, for $100.

I noticed immediately that the display unit had a lot of play in the cylinder.

I think I will avoid this model.

Sent from my MotoE2(4G-LTE) using Tapatalk

Just get the Home Depot unit...yes it's twice the price but it's a great bargain imho...

The  Ridgid machine is a great tool. Dust collection isn't great but none of the bench top sanding tools have good dust collection.

Collin, I debated the same machine, as the HF unit appears identical to several other brand name units in the market. I ended up getting the Rigid oscillating belt / spindle unit, mostly for the belt. Had to exchange the first one, the motor just hummed. It is a nice design, but I can't say with confidence that quality control is any better that what HF sells. At least at HF, they keep the things in stock. I had to order from Home Depot and wait 4 days. Twice.

I picked up my ridgid sander from the HD shelf when I was making a "grocery" trip for the wife.  She wasn't pleased that I didn't get permission, but I was.  It's a nice machine.  My only complaint is the accessories fall out of their holders easily.

1 hour ago, bleedinblue said:

the accessories fall out of their holders easily

I'm pretty sure there are mini trebuchets in the slots for the accessories.  They seem to launch out of there the moment I put them in....

Another vote for the Ridged.  My accessories seem to stay in place even when I tip it to get it out from under the bench where it lives.

6 hours ago, wtnhighlander said:

Collin, I debated the same machine, as the HF unit appears identical to several other brand name units in the market. I ended up getting the Rigid oscillating belt / spindle unit, mostly for the belt. Had to exchange the first one, the motor just hummed. It is a nice design, but I can't say with confidence that quality control is any better that what HF sells. At least at HF, they keep the things in stock. I had to order from Home Depot and wait 4 days. Twice.

I tried the Home Depot oscillating spindle/belt sander as well. I got a hummer as well. Forced me to spend twice as much on the Jet unit w/o belt.

I have the Ridgid unit. When reindeer season hit full swing a couple of years ago, I bought a second one. Later traded one away... I have no complaints on the unit. Changeovers are quick, and tool-less. Dust control... well, it's good enough for the amount that I use it when not making millions of reindeer. 

I have the ridgid unit as well and it does a good job, dc seems to work fine using the spindles but sucks when you use the belt. 

  • Author

Wen, Rockwell, Triton (TSPS450), Shop Fox (1831), Wood River -- they all look like the same unit.

Sears has a sale on a couple of Grizzly units that might be worth checking out.

http://www.sears.com/search=oscillating%20spindle%20sander

There is a 3-phase beast available. A bit pricey but with the motor out in the open like that it wouldn't be too difficult to convert by just swapping motor. At least that's my thought.

http://mansfield.craigslist.org/tls/5530965838.html

I'm surprised and proud of you, Collin.  I had a fear that this thread was gonna go more like

 

"So I went to Harbor Freight this afternoon...

 

...and bought one of everything."

Received this ad from Grizzly via email this morning. It might be something you'd be interested in.

 

Benchtop Oscillating Sander Only $149.95
Valid 04/18/2016 - 04/24/2016
 
G0723-041816.png
  • Author
27 minutes ago, Keggers said:

Received this ad from Grizzly via email this morning. It might be something you'd be interested in.

 

Benchtop Oscillating Sander Only $149.95
Valid 04/18/2016 - 04/24/2016
 
G0723-041816.png

Sears has the same unit, same price.

They also have an apparently identical PowerTec unit for $80 more.

32 minutes ago, Eric. said:

I'm surprised and proud of you, Collin.  I had a fear that this thread was gonna go more like

 

"So I went to Harbor Freight this afternoon...

 

...and bought one of everything."

I've purchased one power tool there -- a 10" disc sander.  And a couple of pneumatic nail guns. Besides those I got their bar clamps.  And a few other little trinkets.

The pride shown is overwhelming.  I'm humbled, in a manner of speaking.

Last week I needed to purchase another vehicle.  Cars are a bit like tools (at times & in some ways).  I would rather drive a 98 E320 than an 05 Toyota.  So in tools I don't mind looking around for something old and solid over something new and cheap. I completely understand why people praise their old Unisaw. And that $600 spindle sander, perhaps if I might get it for $200 and then swap motor ... the worst that can happen is that he says no.

11 hours ago, wtnhighlander said:

Collin, I debated the same machine, as the HF unit appears identical to several other brand name units in the market. I ended up getting the Rigid oscillating belt / spindle unit, mostly for the belt. Had to exchange the first one, the motor just hummed. It is a nice design, but I can't say with confidence that quality control is any better that what HF sells. At least at HF, they keep the things in stock. I had to order from Home Depot and wait 4 days. Twice.

It's getting so that buying at any big-box store is like buying form WalMart. Unless one goes for the pro version of a product one gets stuck with the consumer version. (No. 2 son displayed this to me, noting 3 different versions of the DeWalt 20V drills and reciprocating saws.) There is good stuff and there is hobby stuff and often it all looks alike.

I had the older model of the HF oscillating spindle sander and loved it.  I got 99.9999% dust collection with it.  I got rid of it when I bought the Rigid, but I wish I would have kept it.  My rigid has terrible dust collection.  The HF model can hold larger sized spindles.

  • Author
7 minutes ago, mds2 said:

I had the older model of the HF oscillating spindle sander and loved it.  I got 99.9999% dust collection with it.  I got rid of it when I bought the Rigid, but I wish I would have kept it.  My rigid has terrible dust collection.  The HF model can hold larger sized spindles.

Lincoln ... nice town.  Been a long time since last I ate at Valentino's on South.

Glad to hear you have a good product from them.  It appears to be a generational matter.

1 minute ago, collinb said:

Lincoln ... nice town.  Been a long time since last I ate at Valentino's on South.

Glad to hear you have a good product from them.  It appears to be a generational matter.

I don't think that Valentino's exists any more.  They seem to be tearing down all their old buildings and moving the restaurants to different areas of town.   My HF sander was from about 5 years ago.  

My advice, if you are interested in the HF sander, is to buy it, take it home and try it out for a week.  If its a POS, return it.

Not sure if I just have a good one, but I've been using a harbor freight OSS for years with absolutely no issues.

 

Negligble runout, more accurate than I can ever be... Not saying go out and grab it, but just a positive review from a long time owner.

 

 

20160420_202445.jpg

On 4/18/2016 at 8:32 PM, wdwerker said:

The  Ridgid machine is a great tool. Dust collection isn't great but none of the bench top sanding tools have good dust collection.

I disagree, My Ryobi OSS500 has Festool like dust collection for a spindle sander. I have the Rigid unit too, which has the worst dust collection I've ever seen on a sander. 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.