Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Greene and Greene Inspired 9 Drawer Dresser

Featured Replies

I like metal slides. Call me a poser, but I would personally never use them - if I ever get around to building things with drawers. 

Also this build is so far above my head that i have to take a nap now. Just fantastic work. 

  • Replies 89
  • Views 24.3k
  • Created
  • Last Reply

Top Posters In This Topic

Most Popular Posts

  • Did ya ever notice how the projects for your own home tend to take forever since everything else comes first?   There is a bedroom set that people seem to like.  I have done them in cherry and mahogan

  • Thanks for bearing with me gang.  Although I'm a train-wreck with a camera, here's some better shots.  

  • Getting the bedroom rearranged is just taking forever so I will post some pics of this guy while still in the shop. The chatoyance is always a challenge for me with snapshots.  The built-in flash does

Posted Images

2 hours ago, gee-dub said:

o add a bit of blue/green to genuine mahogany since I feel it is too orange.

Is this a dye? Can you be more specific or share some pictures of an example you used it on?

Nice project!

Dang gee dub. I had a hinkering you were holding out on us. 

I go back and forth on g&g but am throughly impressed with your attention to detail and wood selection.

I look forward to seeing it transform more when you get to finishing. 

  • Author
9 hours ago, JosephThomas said:

Is this a dye? Can you be more specific or share some pictures of an example you used it on?

Nice project!

Yes, Transtint dye(s).  I am having trouble finding a picture but am reasonably sure I used it on this frame:

Mahog Dye Example.JPG

These were done with a clear shellac.  I mix a small about of blue dye in some DNA and then use that DNA to thin the shellac.  The subtle blue hue take the screaming orange edge off of the genuine mahogany. 

Robert Lang, who posts here, uses a technique on mahogany that involves brown, yellow and green artist's oils mixed in a danish oil base in a similar manner.  Here's an example of what I call screaming orange.

F-GnG-BC-pre-wax-top-elev.jpg

This was the original carcass study I built to test the feasibility of some of the joinery methods I was going to use to get the look I was after for the dressers in the bedroom set.  Specifically the corner posts and their attachment to the upper and lower trim. 

The wife caught sight of it and I made the mistake of mentioning that it was just a prototype and was going on the burn pile (haven't made that mistake since).  Anyway I toned down the orange and now it is a bookcase in the home office and really serves little purpose. 

G&G-Bookcase-After-(5).jpg

If I'd know it was gonna come live with me I would've taken more care.  It's pretty ugly 'behind the curtain' <_<

10 minutes ago, gee-dub said:

Yes, Transtint dye(s).  I am having trouble finding a picture but am reasonably sure I used it on this frame:

Mahog Dye Example.JPG

These were done with a clear shellac.  I mix a small about of blue dye in some DNA and then use that DNA to thin the shellac.  The subtle blue hue take the screaming orange edge off of the genuine mahogany. 

Robert Lang, who posts here, uses a technique on mahogany that involves brown, yellow and green artist's oils mixed in a danish oil base in a similar manner.  Here's an example of what I call screaming orange.

F-GnG-BC-pre-wax-top-elev.jpg

This was the original carcass study I built to test the feasibility of some of the joinery methods I was going to use to get the look I was after for the dressers in the bedroom set.  Specifically the corner posts and their attachment to the upper and lower trim. 

The wife caught sight of it and I made the mistake of mentioning that it was just a prototype and was going on the burn pile (haven't made that mistake since).  Anyway I toned down the orange and now it is a bookcase in the home office and really serves little purpose. 

G&G-Bookcase-After-(5).jpg

If I'd know it was gonna come live with me I would've taken more care.  It's pretty ugly 'behind the curtain' <_<

Looks like it's purpose is to hold SK books. A damn fine purpose if you ask me.

  • Author
  • Popular Post

Got the color coats on the drawers this morning.  I'm hoping to get the carcass tomorrow morning.

GnG Low CoD (251).JPG

  • Author
  • Popular Post

OK, as long as this thing has taken over half of my shop I may as well let it rest for a day or two before the top coats.

GnG Low CoD (252).JPG

  • Author
  • Popular Post

We've been having a series of triple-digit days so despite my occasional practice of doing this:

Glenn Untethered.jpg

Out here:

IMG_0832.jpg

The shop can be a bit unbearable.

I have made up some more pillowed plugs and even gotten some installed in preparation for the top coat I thought I would be putting on today.  I just couldn't get in enough shop time to get all the plugs I needed.  That and the persistent temperatures made my decision to put in short stints making and installing plugs for a while a better choice than starting the top coats in temps that are pushing the acceptable range . . .

I bandsaw the ebony and drum sand to near dimensions.  I will plane a bit if required.  I want the plug stock 1/64" over the hole dimensions.  There are 1/4", 5/16" and 3/8" holes on this build. Despite the variety in size, the actions required to get a plug are the same.

GnG Low CoD (254).jpg

GnG Low CoD (255).jpg

I use my custom weighted peg whacker to set the depth. 

GnG Low CoD (256).jpg

 

GnG Low CoD (257).jpg

Drawers straddle something solid not so much to take the blow as to provide a solid feedback.  I always make a few spare plugs.  Although its been awhile (knock on wood) I keep a drill motor and wood screw handy.  If I over-sink a plug I quickly drill a small hole in it and use the screw as a handle to pull it out before the glue gets a hold of it.  A plug that is a teeny bit too proud is unnoticeable; the same amount too deep and its a no-go.

  • Author

Thanks.  That tower is in Indian Wells, Agave Hill specifically.  The view is spectacular as there is a 1000 foot canyon and Agave Hill is at the upper plateau of that canyon.

  • Author
  • Popular Post

Sorry to seem like I've wandered off.  I thought I would be putting top coats on this weekend but, I need to help somebody out.  I have been plunking along a bit here and there.

GnG Low CoD (259).jpg

I'm a huge fan of Greene & Greene and this project. It's absolutely beautiful. I picked up some Cherry yesterday afternoon to start my first G&G inspired project, a couple of small end tables. I'm already making changes to my design after looking at your handiwork. This really is an amazing piece.

-E

A gee-dub clinic on the importance of pre-finish surface prep.  Flawless, satiny smooth, just like it's s'posed to be.  Looks fantastic.

  • Author
  • Popular Post

Finally a little more progress.  This is the first top coat which is a 1:1:1 BLO, varnish, mineral spirits blend with a dash of japan drier.  This coat really just locks the color and establishes a consistent base for me to build a film on.

Not that I do any better when I take my time but, these are just some quick shots and the flash does interesting things to the color.  The last pic is pretty true to the actual color. 

GnG Low CoD (260).jpg

GnG Low CoD (261).jpg

Pictures of the sides on these items vary with your angle and light which is just what I am after.  The chatoyance makes the piece interesting to look at as you pass by; it sort of shimmers.

GnG Low CoD (262).jpg

This is pretty close to what it looks like under the normal house lighting spectrum.

GnG Low CoD (263).jpg

Looks great! I really like the rich color of the walnut! What color of dye do you use on the walnut?

  • Author
1 hour ago, Alan G said:

Looks great! I really like the rich color of the walnut! What color of dye do you use on the walnut?

It is a combination of Transtint dyes.  For this piece I am matching a previously built piece so I experimented till I got what I was after.  I add Transtint 'dark walnut' and a bit of 'reddish brown'.  I add the dyes to the varnish base (Cobot's gloss in this case) till I get about what I want.  I then add the BLO and mineral spirits and do a test board that has been surface prepared using the same protocol as the piece (don't get lazy on your test board prep; this can lead to unpleasant surprises) :angry:.

For a simple mix that gets a really beautiful walnut color for those of us that prefer our walnut chocolaty, Watco Dark Walnut can be mixed with an oil varnish blend.  This simple urn is done with this finish as it is quick and easy when you're in a time crunch.

Jans Urn (6).jpg

Side topic . . . .

I do a lot of finishing by hand; padding if you will.  This can burn through a lot of gloves on a project this size.  Cotton inspection gloves make stripping gloves off and re-using them pretty foolproof.  It also keeps you from getting that sweat layer between your hand and glove.

 

I think I got these at Lee Valley although they are available from other suppliers.

gloves (1).jpg

Just slip one on and then slip your nitrile glove on over it.  I get less interference and have better dexterity to get into all those nooks and crannies with these.  I don't use them all the time but, for a large hand finished piece they are a winner IMHO.

gloves (2).jpg

gloves (3).jpg

The cotton gloves can be run through the wash (if you don't get nasty stuff all over them).

Edited by gee-dub
950

Thanks for the great info!  ill have to try that glove thing. My hand is soaked after wearing those nitrile gloves for any length of time....

Nice tip on the gloves. Mind if I ask what size combination you use? I don't have particularly large hands (although larger than a particular presidential candidate, apparently), and I struggle to put on 9mil X-large nitrile gloves without tearing them. And after about 10 minutes, I have water balloons hanging at the end of my arms.

  • Author

The inspection gloves came in men's and women's and it appears Lee Valley no longer carries them.  The weave is such that they fit a large range but, another supplier may differ.  On the nitrile I find the thinner gloves actually tear less (4 to 6 mil).  I wear a large regular glove but wear a medium nitrile so that is fits snugly. 

For padding on finish a flap of glove material riding along the surface will really mess me up.  For me the quest for the perfect blend of resilience and flexibility in finishing gloves is a constant search.  When I try something new and they are easily torn I double glove.  This is a pain but, at least I get some value out of the purchase ;-) 

  • 3 weeks later...

Looks like this discussion went up just before I joined the community here, so I'm late, but just want to say I think this is fantastic. I continue to be inspired by the work I see you guys putting on display here. Great design and great execution. 

This is a rookie question, but I have to learn somehow, so I hope you don't mind me asking, when you say the dresser is a carcass, I imagine that says something about the design, as opposed to some alternate approach, is that right? Could you talk a little about that?

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,012 Total Members
  • 3,644 Most Online
  • JAR Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.