Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Cabinet Cutting Board

Featured Replies

  • Popular Post

As many of you know, I'm currently on the road for work.  I was fortunate enough to find someone at the refinery I'm working in to stay with in their home rather than a hotel.

The kitchen cabinets are typical of those built in the 80's where they have a cutting board built into the cabinets.  When I asked where the one was that belonged in this house, the home owner took me to the garage and showed me the chunk of plywood that was in there when he bought the house.  He said it was just gross when he bought the house so, just tossed it in the garage about 8 years ago.

So, with Chet's help, I was able to correct that today.  Big thanks to Chet for the use of his shop and the help along the way!

xgfBDV.jpg

 

Nicely done, and a perfect use of the resources[Chet]. Good job Kev!

Is the stripe inlaid, or through like the other ones? What is it made of?

Looks good! 

  • Author
5 minutes ago, Llama said:

Is the stripe inlaid, or through like the other ones? What is it made of?

Looks good! 

Walnut with a maple stripe - All the way thru like the others.

Look at you dude! Mighty cool! I'm sure your buddy's wife appreciates it and will repay you handsomely with home cooked meals. And maybe you can tell Chet how good they were!

32 minutes ago, TIODS said:

Walnut with a maple stripe - All the way thru like the others.

Walnuts and Maple syrup..... Yes!

Great job Kev!  The grain in the walnut sort of gives the appearance of a dark bamboo!

Great job on that cutting board. We used to have one of those, but every time the kids used it, they'd push it back in without cleaning it. The drawers below would just fill with crumbs & gunk. So it was either get rid of the board or the kids. Still not sure I made the right choice :)

  • Author
Just now, drzaius said:

Great job on that cutting board. We used to have one of those, but every time the kids used it, they'd push it back in without cleaning it. The drawers below would just fill with crumbs & gunk. So it was either get rid of the board or the kids. Still not sure I made the right choice :)

So you got rid of the kids? ;)

 

  • Popular Post

No, sadly. But on the up side, I got some fantastic grandkids out of the deal.

Very cool. Like a pleasant surprise every time she cuts something.

Looks like you had to do end grain gluing.  Is that right?

Looks good. But I'm a little confused at what I'm seeing, might just be my crappy monitor...can you explain the joinery? 

Spin me up here Kev, it looks like you crosscut the main blank then off set it then reglued?. That would be gluing end grain to end grain.  How did you make it strong enough to do the bent inlay?

Obviously he used pocket holes hidden on the underside then used a plug cutter to make nice pocket hold plugs.  Obviously. I'm just gonna go with that until we get a response ;)

Yeah it's probably dominos. I was only suggesting pocket holes to try and spark enough anger to get a response: p

Sent from my Nexus 5 using Tapatalk

  • Author
8 hours ago, Brendon_t said:

Spin me up here Kev, it looks like you crosscut the main blank then off set it then reglued?. That would be gluing end grain to end grain.  How did you make it strong enough to do the bent inlay?

That's exactly what I did, just a straight up glue up and it held fine.  I didn't have a domino to use.  The "handle" on the end has domino's in it as I brought mine back with me after a short trip home.

great work Kev I'm sure it will see many years of use, and imagine, woodworkers helping each other, who would have thought:) way to go Chet!

  • Author
20 minutes ago, Brendon_t said:

Good to know.  Were you using epoxy or pva?

PVA

25 minutes ago, treeslayer said:

great work Kev I'm sure it will see many years of use, and imagine, woodworkers helping each other, who would have thought:) way to go Chet!

Exactly, nicely done!

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.