Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

More Cutting Boards

Featured Replies

  • Popular Post

Got to hang with Chet again today and toss some cutting boards together.  Thanks for the fun Chet!

Rough lumber

q54kJf.jpg

All Milled up

gC3pGH.jpg

Laying them out

8f1Adj.jpg

First glue up

D6tDHQ.jpg

Second glue up - end grain

UfuNxK.jpg

Third glue up - Adding the sides - Sorry for the blurry pic, didn't notice it when I took it

HzoczE.jpg

Salad bowl finish

vn3C3T.jpg

9 total boards!

 

 

  • Popular Post

When Kev shows up at your shop, things get done! Nice work guys. 

Dang guys, from start to finish in one day? Makes me dizzy just thinking about it! Great team work!

  • Author
1 minute ago, Just Bob said:

Very nice, what wood?

Maple,African Mahogany, and Walnut

12 hours ago, estesbubba said:

When Kev shows up at your shop, things get done! Nice work guys. 

I am mainly in charge of keeping Kev busy and out of trouble while he is here in Northern California.

 

12 hours ago, TIODS said:

9 total boards!

If there was enough wood for 10 board Kev would have been in trouble because all clamps on the rack were used on the 9.

All that in one day? I helped a friend with a couple of cutting boards last year and we were letting each glue-up sit for 24-hours before cutting them down. It makes for a great filler between steps of larger projects. But if you can knock out 9 in 1 day, we're doing something wrong.

-E

  • Author
5 minutes ago, Elroy Skimms said:

All that in one day? I helped a friend with a couple of cutting boards last year and we were letting each glue-up sit for 24-hours before cutting them down. It makes for a great filler between steps of larger projects. But if you can knock out 9 in 1 day, we're doing something wrong.

-E

Well, for starters, you have to remember that I'm currently in California so, the temperatures are fairly warm.  Each glue sat for about 2 hours before moving on to the next step.  They only had to be "cured enough" to keep moving.  3 glue ups in a day is about as hard as I'd feel comfortable pushing it.

22 hours ago, TIODS said:

Well, for starters, you have to remember that I'm currently in California so, the temperatures are fairly warm.

I miss Southern California weather, but I love having 4 seasons. Southern California you have Spring and Wildfire season, which is just like Spring except windy.

What kind of glue did you use? I'm assuming not Titebond 3 due to it's longer assembly time.

-E

Super nice cutting boards, Kev. Great to have a friend like Chet with an awesome shop ! 

  • Author
13 minutes ago, Elroy Skimms said:

I miss Southern California weather, but I love having 4 seasons. Southern California you have Spring and Wildfire season, which is just like Spring except windy.

What kind of glue did you use? I'm assuming not Titebond 3 due to it's longer assembly time.

-E

That's normally what I use but, just used regular TB for these.

Great looking cutting boards! Should make wonderful gifts!

 

Very nice boards! I see Chet is well stocked in the good quality clamps department. That sure helps batching things out in a short period of time.

  • Author
1 minute ago, Immortan D said:

Very nice boards! I see Chet is well stocked in the good quality clamps department. That sure helps batching things out in a short period of time.

We were taxing the limits of his collection on those!  But, yes, he has plenty for most projects.

I was hoping pics were being taken!! 

Great looking boards there Chet and Kev. Does mixing the end grain with not end grain on the checkerboards effect anything with the wood movement? It wont pull away will it?

I was hoping pics were being taken!! 

Great looking boards there Chet and Kev. Does mixing the end grain with not end grain on the checkerboards effect anything with the wood movement? It wont pull away will it?

Marc covered this at one point, either in his channel or wood talk and the consensus was, yes, it will cause trouble if the board is exposed to any fluctuations in humidity. Perhaps keeping it indoors at the same house, you won't though, I'm not sure... At my house there's too much variation indoors to even risk it (houses aren't sealed well, no insulation, cheap windows, large fluctuations in weather from day to night).

Sent from my Nexus 5 using Tapatalk

On 10/23/2016 at 9:11 AM, Chet K. said:

I am mainly in charge of keeping Kev busy and out of trouble while he is here in Northern California.

No wonder he stays up there,  we tried to drink ourselves out of a mexican restaurant when he came down here. 

35 minutes ago, Brendon_t said:

No wonder he stays up there,  we tried to drink ourselves out of a medical restaurant when he came down here. 

Didn't know "medical" places served tacos and beer...

 

18 minutes ago, JosephThomas said:

Didn't know "medical" places served tacos and beer...

 

Ha ha,  apparently my phone thought Mexican place was a "micro aggression" and changed it to the ever popular safe space of medical.

5 minutes ago, Brendon_t said:

Ha ha,  apparently my phone thought Mexican place was a "micro aggression" and changed it to the ever popular safe space of medical.

Hmm, not a bad idea for a name, file that one away.

  • Author
20 hours ago, bushwacked said:

I was hoping pics were being taken!! 

Great looking boards there Chet and Kev. Does mixing the end grain with not end grain on the checkerboards effect anything with the wood movement? It wont pull away will it?

I've never had issue with the long grain stuff only on the outside edges. 

8 hours ago, Brendon_t said:

No wonder he stays up there,  we tried to drink ourselves out of a mexican restaurant when he came down here. 

I think I remember a little food in there too..  Mostly beer tho ;)

 

Just a question because it's being talked about. Does temperature have an effect on that time and if so how much?

I usually shoot for an hour.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.