Popular Post wdwerker Posted March 18, 2017 Popular Post Report Posted March 18, 2017 A client contacted me requesting a shelf display for a menswear store in a high end shopping district. He wanted some rough price numbers and options. We settled on a design and I drew a crude sketch for him. It's open on all 4 sides. 5/4 african mahogany. 9 Quote
Popular Post drzaius Posted March 18, 2017 Popular Post Report Posted March 18, 2017 I, for one, am looking forward to another of your build journals. I always learn stuff. 3 Quote
wdwerker Posted March 18, 2017 Author Report Posted March 18, 2017 After several days of ripping and dressing stock & then discarded the ones that were not going to dress under an exact 1" x 2" . The corners needed to be "L " shaped. I labeled 5 oversized blanks and then ripped them again so the small piece could be rolled 90 degrees like a bookmatch and glued back on. 1 Quote
Chet Posted March 18, 2017 Report Posted March 18, 2017 Looking forward to watching this, Steve. Quote
..Kev Posted March 18, 2017 Report Posted March 18, 2017 I always enjoy your builds Steve! Such a true professional in the industry! Quote
treeslayer Posted March 18, 2017 Report Posted March 18, 2017 thanks for letting us tag along Steve, always good to see your process. Quote
Popular Post wdwerker Posted March 18, 2017 Author Popular Post Report Posted March 18, 2017 Each strip was drum sanded to 180 grit on all 4 sides. After the initial 120 grit several strips had a slight twist or bow in them. So I made the sled you see under the corner strips. I shimmed with playing cards under the strip bow side up and flattened that face then flipped them and flattened the other side. Then on to cutting over a 100 mortices with the Domino. This is just the center legs and some of the long cross pieces. We cut 1/2" MDF spacers to keep all the openings square while gluing up the end sections. Oh, I forgot to mention due to the 1" x 2" cross section of all the joints I used the widest setting with the 8 mm cutter on the Domino. I made tenon stock that was about 2mm narrower than the opening. Rip an oversized strip, drum sand to exact dimensions then round over all 4 corners at the router table. Make 3 times what you need cause extra strips take almost no more time. Crosscut to length with a First Grader Pencil ✏️ eraser as a hold down then gently flick it aside. 4 Quote
prov163 Posted March 18, 2017 Report Posted March 18, 2017 8 hours ago, Lester Burnham said: Thank you, Steve. I'm ready. Me too! Might track down your shop in Atlanta and watch first hand - LOL 1 Quote
Popular Post wdwerker Posted March 18, 2017 Author Popular Post Report Posted March 18, 2017 Watch my ass, you would be handed a broom or a piece of sandpaper ! 6 Quote
mat60 Posted March 18, 2017 Report Posted March 18, 2017 10 minutes ago, prov163 said: Me too! Might track down your shop in Atlanta and watch first hand - LOL You do the broom and I have the paper. Quote
prov163 Posted March 18, 2017 Report Posted March 18, 2017 9 minutes ago, wdwerker said: Watch my ass, you would be handed a broom or a piece of sandpaper ! I'm not sure I'm qualified to use a broom but I can ruin wood with sandpaper with the best of them! Quote
Popular Post wdwerker Posted March 20, 2017 Author Popular Post Report Posted March 20, 2017 Next we glued up half of the crosspieces. 8 sticks were no fun to line up. TB Extend is real thin and kinda runny but it let us fuss and adjust for over 30 minutes to get everything tapped into alignment and clamped. The 1/2" MDF spacers kept all the corners nice and square. Then we went after the top. Managed to cut both pieces out of one plank so the color and grain match up pretty well. Used 5mm dominos for alignment. 4 Quote
gee-dub Posted March 20, 2017 Report Posted March 20, 2017 This is great. Thanks for taking us along. Quote
bushwacked Posted March 20, 2017 Report Posted March 20, 2017 yay another Steve journal! Looking good so far! Quote
Janello Posted March 20, 2017 Report Posted March 20, 2017 Cool trick with the MDF. You're like Felix the Cat of woodworking. 1 Quote
Chet Posted March 20, 2017 Report Posted March 20, 2017 I really like watching your build Steve. There is always something to learn. Quote
bushwacked Posted March 20, 2017 Report Posted March 20, 2017 how do you get the MDF out? does it just pop out? Quote
rodger. Posted March 20, 2017 Report Posted March 20, 2017 Looking good! Anxiously awaiting more! Quote
Coop Posted March 20, 2017 Report Posted March 20, 2017 How in the heck did I miss thIs one. Looking good man! Guess you won't be trading the domino in any time soon! Quote
prov163 Posted March 20, 2017 Report Posted March 20, 2017 Great work Steve! It's fun watching the build. Thanks for sharing. Quote
Popular Post wdwerker Posted March 21, 2017 Author Popular Post Report Posted March 21, 2017 Pulled all the clamps and started glueing up the second half of the frame. Get the whole damn thing clamped up and we got the end and side strips backwards. We had picked out 8 lighter strips for the back and the darker ones for the front. Ended up half and half. So glad we used the "TB Extend " glue ! Well past 25 minutes in we pulled the clamps and tapped it apart with rubber hammers. Had to use pliers to tease some of the dominos out. Switched all the parts around & used those little plastic spatulas to spread the glue around and put it all back together. The MDF spacers fit pretty snugly once the clamps were on but the edges are soft enough they popped right out with a couple whacks about 2 1/2 hours later. We sanded the top flat, trimmed it to final sized and finished sanded it 120, 150, 180 while the glue was drying. We didn't stress it but the frame was quite ridgid after 2 1/2 hours. Sanding ate up the rest of the day. The lower shelves are Mahogany ply. We are going to glue and nail a strip around the inside for the shelves to sit about 3/32 below the frame. With the shelves loose we can spray the inside of the frame much easier. And sanding between coats will be much easier too. 8 Quote
Coop Posted March 21, 2017 Report Posted March 21, 2017 Steve, will this sit on a base? Your initial illustration doesn't show one. Glad you caught the mistake before you took a coffee break. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.