Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Men's store display shelves

Featured Replies

  • Popular Post

A client contacted me requesting a shelf display for a menswear store in a high end shopping district.  He wanted some rough price numbers and options. We settled on a design and I drew a crude sketch for him. It's open on all 4 sides. 5/4 african mahogany.

IMG_2736.thumb.JPG.12143f2c58abf9dbea1117d42c538220.JPG

IMG_2737.thumb.JPG.f3af0b77ca7e7fffbf62434c57541c19.JPG

 

  • Replies 67
  • Views 14.1k
  • Created
  • Last Reply

Top Posters In This Topic

Most Popular Posts

  • Delivered and installed ! Client was so happy he ordered  2 more pieces. Same style, wood and finish but different sizes. New pieces will go on either end of the sofa. One will b

  • A client contacted me requesting a shelf display for a menswear store in a high end shopping district.  He wanted some rough price numbers and options. We settled on a design and I drew a crude sketch

  • Sanding the framework was no fun. Reaching in between all of those crosspieces is really awkward. 128 individual faces and being careful not to sand through at so many corners. After that sprayin

Posted Images

  • Popular Post

I, for one, am looking forward to another of your build journals. I always learn stuff.

  • Author

IMG_2745.thumb.JPG.d579c43c59be6abf5c25b7108ca0b97b.JPGAfter several days of ripping and dressing stock & then discarded the ones that were not going to dress under an exact 1" x 2" .

 

The corners needed to be "L " shaped. I labeled 5 oversized blanks and then ripped them again so the small piece could be rolled 90 degrees like a bookmatch and glued back on.

 

 

 

 

 

 

 

 

I always enjoy your builds Steve!  Such a true professional in the industry!

  • Author
  • Popular Post

Each strip was drum sanded to 180 grit on all 4 sides. After the initial 120 grit several strips had a slight twist or bow in them. So I made the sled you see under the corner strips. I shimmed  with playing cards under the strip bow side up and flattened that face then flipped them and flattened the other side. Then on to cutting over a 100 mortices with the Domino.

IMG_2738.thumb.JPG.8abe9dcfd44a4ffe7e70d28a7d9aa4b3.JPG

This is just the center legs and some of the long cross pieces.

We cut 1/2" MDF spacers to keep all the openings square while gluing up the end sections.

IMG_2740.thumb.JPG.02f102d4b009dc36fabc323e0bc0e1f0.JPG

Oh, I forgot to mention due to the 1" x  2" cross section of all the joints I used the widest setting with the 8 mm cutter on the Domino. I made tenon stock that was about 2mm narrower than the opening. Rip an oversized strip, drum sand to exact dimensions then round over all 4 corners at the router table. Make 3 times what you need cause extra strips take almost no more time. Crosscut to length with a First Grader Pencil ✏️ eraser as a hold down then gently flick it aside.

 

 

 

 

8 hours ago, Lester Burnham said:

Thank you, Steve. I'm ready.

 

Students%20Taking%20Notes%20at%20Desks%20by%20VCU_Brandcenter.jpg

Me too!  Might track down your shop in Atlanta and watch first hand - LOL

10 minutes ago, prov163 said:

Me too!  Might track down your shop in Atlanta and watch first hand - LOL

You do the broom and I have the paper.

9 minutes ago, wdwerker said:

Watch my ass, you would be handed a broom or a piece of sandpaper !

I'm not sure I'm qualified to use a broom but I can ruin wood with sandpaper with the best of them!

  • Author
  • Popular Post

Next we glued up half of the crosspieces. 8 sticks were no fun to line up. TB Extend is real thin and kinda runny but it let us fuss and adjust for over 30 minutes to get everything tapped into alignment and clamped.

IMG_2742.thumb.JPG.56bf125fa94a165844de6a4a939cc1df.JPG

The 1/2" MDF spacers kept all the corners nice and square.

Then we went after the top. Managed to cut both pieces out of one plank so the color and grain match up pretty well.  Used 5mm dominos for alignment.

IMG_2743.thumb.JPG.13264466b5dd21f16e0cc60003089b63.JPG

IMG_2744.thumb.JPG.df4ca7491deaacf4d366f9881309e1e3.JPG

 

How in the heck did I miss thIs one. Looking good man! Guess you won't be trading the domino in any time soon!

Great work Steve!  It's fun watching the build. Thanks for sharing. 

  • Author
  • Popular Post

Pulled all the clamps and started glueing up the second half of the frame. Get the whole damn thing clamped up and we got the end and side strips backwards. We had picked out 8 lighter strips for the back and the darker ones for the front. Ended up half and half. So glad we used the "TB Extend " glue ! Well past 25 minutes in we pulled the clamps and tapped it apart with rubber hammers. Had to use pliers to tease some of the dominos out. Switched all the parts around & used those little plastic spatulas to spread the glue around and put it all back together. The MDF spacers fit pretty snugly once the clamps were on but the edges are soft enough they popped right out with a couple whacks about 2 1/2 hours later.  We sanded the top flat, trimmed it to final sized and finished sanded it 120, 150, 180 while the glue was drying. 

We didn't stress it but the frame was quite ridgid after 2 1/2 hours. Sanding ate up the rest of the day.

IMG_2748.thumb.JPG.a3099db81b42b6eb9e3a0c1f224c7937.JPG

IMG_2749.thumb.JPG.e51d0fe7670d126e969ac2edfa700853.JPG

The lower shelves are Mahogany ply. We are going to glue and nail a strip around the inside for the shelves to sit about 3/32 below the frame. With the shelves loose we can spray the inside of the frame much easier. And sanding between coats will be much easier too.

Steve, will this sit on a base? Your initial illustration doesn't show one.  Glad you caught the mistake before you took a coffee break. 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,012 Total Members
  • 3,644 Most Online
  • JAR Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.