Popular Post ..Kev Posted November 12, 2017 Popular Post Report Posted November 12, 2017 Time for some end tables to go with the new couches in the new house.. 10 Quote
Larry Moore Posted November 12, 2017 Report Posted November 12, 2017 Looks like a good start will be fun to watch 1 Quote
Just Bob Posted November 12, 2017 Report Posted November 12, 2017 Thanks for taking us through the design process! Another good video, Kev. 1 Quote
Ronn W Posted November 12, 2017 Report Posted November 12, 2017 Great video and a fun project. Thanks for posting it. I like it. 1 Quote
Llama Posted November 12, 2017 Report Posted November 12, 2017 Who's that Morris guy? lol Looking good! 1 Quote
wdwerker Posted November 12, 2017 Report Posted November 12, 2017 This is shaping up to be a very interesting project. 1 Quote
bushwacked Posted November 13, 2017 Report Posted November 13, 2017 man you are were right ... it was huge and bulky in V1 of that drawing ... I think the final drawing you showed will look great built out close to those proportions! Some massive slabs too! Cant wait for next Sunday The shop lighting is looking way better than it was in the shop move videos too!! 1 Quote
..Kev Posted November 13, 2017 Author Report Posted November 13, 2017 Thanks BW. Lots of milling coming Quote
Chet Posted November 13, 2017 Report Posted November 13, 2017 I have been out of town so I am just seeing this video. Nice transformation in the design getting the base to have a lighter look. I am Looking forward to the next video. 1 Quote
Popular Post ..Kev Posted November 19, 2017 Author Popular Post Report Posted November 19, 2017 Time to mill up some lumber.. A little early again, I have another early day at work tomorrow... 6 Quote
bushwacked Posted November 19, 2017 Report Posted November 19, 2017 16 minutes ago, TIODS said: Time to mill up some lumber.. A little early again, I have another early day at work tomorrow... Yessss! A day early haha. Will watch after I get the kiddos to sleep 1 Quote
treeslayer Posted November 19, 2017 Report Posted November 19, 2017 Another great video Kev, those are going to look great I'm sure, thanks for taking us along for the ride. 1 Quote
Coop Posted November 19, 2017 Report Posted November 19, 2017 Kev, another great vid. Just wondering, what is that hoss of a hammer just left of your drill press? 1 Quote
..Kev Posted November 19, 2017 Author Report Posted November 19, 2017 1 minute ago, K Cooper said: Kev, another great vid. Just wondering, what is that hoss of a hammer just left of your drill press? Just a framing hammer.. Better than grabbing the expensive stuff to beat on things Quote
mat60 Posted November 19, 2017 Report Posted November 19, 2017 Parts are shaping up. Thanks for the video. I really like your new shop set up but I was wondering when you use your planer on long stock you must move it another way or your back would hurt I bet. Quote
..Kev Posted November 19, 2017 Author Report Posted November 19, 2017 5 minutes ago, mat60 said: Parts are shaping up. Thanks for the video. I really like your new shop set up but I was wondering when you use your planer on long stock you must move it another way or your back would hurt I bet. The planer is a stand alone item. I can put it anywhere in the shop really. So, just roller stands for infeed/outfeed support on long items. 1 Quote
Chet Posted November 19, 2017 Report Posted November 19, 2017 Thanks for the video. I am looking at your table tops and even thought you may have a little final sizing to do, they look pretty large. I am guessing the room they are going in is fairly sizable. Quote
..Kev Posted November 19, 2017 Author Report Posted November 19, 2017 15 minutes ago, Chet said: Thanks for the video. I am looking at your table tops and even thought you may have a little final sizing to do, they look pretty large. I am guessing the room they are going in is fairly sizable. Yes, they area that they will be filling is pretty good sized. One of the main reasons for choosing the large slabs. They will stay full width but, will lose an inch or 2 in the length. Quote
Keggers Posted November 19, 2017 Report Posted November 19, 2017 Always excited to see your project videos. I learn something new every time! Thank you! 1 Quote
Popular Post ..Kev Posted November 27, 2017 Author Popular Post Report Posted November 27, 2017 On the road for work and lost track of what day of the week it was.. Time for some templates to keep things consistent between the 2 tables. 5 Quote
Chet Posted November 27, 2017 Report Posted November 27, 2017 I was kind of wondering what happened when there wasn't anything here this morning. But again, good video. You can really tell the difference of having your DC in he shop instead of on he other side of the wall. 1 Quote
..Kev Posted November 28, 2017 Author Report Posted November 28, 2017 On 11/26/2017 at 7:40 PM, Chet said: I was kind of wondering what happened when there wasn't anything here this morning. But again, good video. You can really tell the difference of having your DC in he shop instead of on he other side of the wall. Thanks Chet. Yes, huge difference! We're really leaning towards building another 30x50 and this is one of the reasons pushing us that direction. Quote
bushwacked Posted November 28, 2017 Report Posted November 28, 2017 16 minutes ago, TIODS said: Thanks Chet. Yes, huge difference! We're really leaning towards building another 30x50 and this is one of the reasons pushing us that direction. YES!! Another shop build out series 1 Quote
mat60 Posted November 28, 2017 Report Posted November 28, 2017 Every one of your videos seem to have me looking forward to the next one. Thanks. 1 Quote
Popular Post ..Kev Posted December 3, 2017 Author Popular Post Report Posted December 3, 2017 Job finished up just in time for me to get home and get these tables done! Here's some legs in the mean time.. 6 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.