Recommended Posts

Posted

I've been watching NCIS episodes in order on Netflix.  Noticed Gibbs does a good bit of drinking in the shop. Haven't seen him do anything after pouring one but it does seem to happen often.  I've had a beer or poured a shot in my shop but never turned on a saw afterwards. Maybe a spray gun or some sandpaper.  The story line of him building boats in the basement and I saw him hand sanding the ribs of a boat. Who sands a rib before covering it with planks ? His character seems believable but then he bought a Shopsmith. That seemed out of character to me, what do y'all think?

  • Like 2
Posted
25 minutes ago, wdwerker said:

I've been watching NCIS episodes in order on Netflix.  Noticed Gibbs does a good bit of drinking in the shop. Haven't seen him do anything after pouring one but it does seem to happen often.  I've had a beer or poured a shot in my shop but never turned on a saw afterwards. Maybe a spray gun or some sandpaper.  The story line of him building boats in the basement and I saw him hand sanding the ribs of a boat. Who sands a rib before covering it with planks ? His character seems believable but then he bought a Shopsmith. That seemed out of character to me, what do y'all think?

I find nothing else about that show, or the ones like it, believable, including the hobbies they always give the main character. It's usually some of type of DIY hobby, or they're a baseball fan. Has to be something that appeals to a large number of viewers for that type of show (white middle class ppl, in my experience). Wife's family loves those shows and always makes me watch with them around the holidays ...here we go :D

As for the drinking, I usually go out to the shop to get things done, not to hang out, so I don't tend to mix the 2 things.

  • Like 1
Posted

It’s a good story point...poorly implemented. The concept of a guy who builds boats in his basement that are too large to remove whole is fun. It makes a lot of non-builders ask if that is even possible. Beyond that, I doubt anyone is connected enough to boatbuilding to make all scenes go along with the story. 

  • Like 1
Posted

Do your self a favor and don't look up wooden boat building. It's a rabbit hole like you wouldn't believe. Folks will sand every part of them to a crazy degree. Probably the only wood working where Douglas fir is considered an asset.

I saw on a boat building forum a guy who did build a boat in his basement and didn't have a door big enough to get it out. He ended up having to re-drywall a corner he couldn't quite get around even with the boat turned sideways.

  • Like 1
Posted

We're watching it too from Netflix, I've never seen him use a power tool, just sand, he does a lot of sanding, and hammer. He also uses his misc. screw jar as a cup which is so unsanitary or safe. 

Characters ask him how he removes the boats and he just smiles. 

Posted
7 hours ago, JosephThomas said:

I find nothing else about that show, or the ones like it, believable, including the hobbies they always give the main character.

All the computer stuff throws me out of the show. I don't think they have a computer literate person on that show. 

  • Like 2
Posted
4 minutes ago, Chestnut said:

Wait so i shouldn't build a boat in my basement?

Parks and Recreation has a fairly realistic take on wood working through one of the characters :ph34r:

Christian Becksvoort of Fine Woodworking made an appearance on the show. Pretty cool. 

On the movie Must Love Dogs, John Cusack's character builds boats. The only tools in his shop where hes building the boat are F-clamps and a block plane.

  • Like 2
Posted

Last year history channel had this series supposedly about Seal Team Six... which wasn't really very historical, but I like Walter Goggins as an actor so I watched it.

One of the characters was building a bed in his garage.   I recall it being a curved framed headboard with these real delicate spindles... kind of a windsor chair look.   Anyway it looked really nice until he destroyed it in a fit of rage after a failed mission.  I don't recall seeing any tools in the garage.   I think he hand carved it with a knife, like a real man.

 

If you think Gibbs is the most  unrealistic thing on that show, don't pay attention to Abby and her forensics lab. :-)

  • Like 2
Posted

Anyone who was in the military has certainly suffered through movies with all sorts of inappropriate saluting, wearing of cover and so forth.  Medical folks must roll their eyes near-constantly.  Its an element of a character in a story.  Like reading Alice in Wonderland, a suspension of disbelief makes the ride more fun.

  • Like 2
Posted
54 minutes ago, gee-dub said:

Anyone who was in the military has certainly suffered through movies with all sorts of inappropriate saluting, wearing of cover and so forth.  Medical folks must roll their eyes near-constantly.  Its an element of a character in a story.  Like reading Alice in Wonderland, a suspension of disbelief makes the ride more fun.

Oh don't get me started. The standard salute rendered as part of an appropriate greeting of the day is horrendous.  Next time you're feeling froggy, look at the ribbon stack on most every character in JAG.  

 Personally I've never seen the show but I love the idea of building a passion project in the basement that will never make it out.  Don't know what it is but I can say there's a romantic element to building something and putting your blood, sweat, and treats in it for no other reason than for yourself. 

Posted

I am surprised that no one commented on the Shopsmith purchase. 

I love how a boat gets built and then disappears. They have made references to more than one boat being built over the years. As to the medical, computer or military protocols I think it is like science fiction, you have to buy into the story line and suspend disbelief. Then you can just enjoy the ride. 

  • Like 2
Posted
5 minutes ago, wdwerker said:

I am surprised that no one commented on the Shopsmith purchase. 

That was an interesting thing in the story line because Gibbs  character is a hand tool guy but I think the shopsmith thing was because he is also into things that are old school... he still watches a black and white TV.  All he did with the machine was clean it up, he never uses it.  The underlying thing with the boats he builds is that when he finishes them he names them after his ex-wives and then burns them... how he burns them without burning his house down is a decussion for another day.  I guess the safe thing to do is remember that it is all donee in the name of TV entertainment.

Interesting fact though, Mark Harmon in real life IS a hand tool guy.

 

  • Like 1
Posted

A friend of mine's Dad built an airplane in his basement. He built the fuselage and had a contractor come out and did down along the basement. Then he dismantled the block foundation. Took the finished part out to the barn and put the foundation back in. He then proceeded to build the wings. After that he repeated the process with the foundation and finished assembly in the barn. It was in all the local papers when he took it out for it's maiden flight. It was amazing.

Posted

Not quite the same, but when I was growing up here in Minnesota there was a guy down the road building a big catamaran in his back yard.   It was 40-50 foot long... So the two floaty bits, and a center cabin section which he built independently.  He was going to load this all up on semi trucks and take it to the Mississippi river, assemble and then sail down to the Gulf.  I don't know if he ever finished.   He'd been working on it for 10 years by the time I went off to college and it still wasn't complete.

 

 

 

Posted
5 hours ago, Minnesota Steve said:

Not quite the same, but when I was growing up here in Minnesota there was a guy down the road building a big catamaran in his back yard.   It was 40-50 foot long... So the two floaty bits, and a center cabin section which he built independently.  He was going to load this all up on semi trucks and take it to the Mississippi river, assemble and then sail down to the Gulf.  I don't know if he ever finished.   He'd been working on it for 10 years by the time I went off to college and it still wasn't complete.

 

 

 

Was he named Noah perhaps?   That's a big cat...

Posted
17 hours ago, wdwerker said:

Yea, but where did he get the gopher wood ?

and does anyone know how to convert feet to cubits ?

woobba..... woooba......wooba....woooba...... DING!  "NOAH!"

"WHAT?!"

  • Thanks 1
  • Haha 1
Posted
On 12/21/2017 at 6:09 AM, thatCharlieDude said:

All the computer stuff throws me out of the show. I don't think they have a computer literate person on that show. 

I thought they did it as an extremely sarcastic joke...sad if you're correct, but it's possible, haha.

Posted
On 12/21/2017 at 7:03 AM, woodbutcher said:

hristian Becksvoort of Fine Woodworking made an appearance on the show. Pretty cool. 

Yeah it was pretty cool.  I also like when Ron is making chairs for Tom's restaurant and he destroys it because it "wasn't perfect"

  • Like 1
Posted
20 hours ago, wdwerker said:

Yea, but where did he get the gopher wood ?

and does anyone know how to convert feet to cubits ?

The egyption royal cubit, appropriate for the time frame of Noah, is equal to 20.6 inches. The ark was designated as 300 cubits x 50 cubits x 30 cubits. That translates to 515 ft x 85.6 ft x 51.5 ft.

Those dimensions fit remarkably well with measurements of the "boat-shaped object" discussed here:

https://wyattmuseum.com/discovering/noahs-ark

Its an interesting read, including some cool analysis of wood properties and joinery techniques related to boat building. Some impressively advanced technology too (plywood and metal alloy rivets), considering the object is estimated between 4000 and 5000 years old.

  • Like 1

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   1 Member, 0 Anonymous, 33 Guests (See full list)

  • Forum Statistics

    32k
    Total Topics
    437.5k
    Total Posts
  • Member Statistics

    26,007
    Total Members
    3,644
    Most Online
    FurniCore
    Newest Member
    FurniCore
    Joined