Mark J Posted January 3, 2018 Report Posted January 3, 2018 My front door has split apart. Yes that white stuff running across is ice. The door dates to around 1906. The bottom panel consists of two wide boards (probably 12") that presumably were edge glued at one time. The joint has separated, and I think the boards have "contracted", but the wind is literally blowing through the gap. It was hard to detect at first as so much air iniftrates around the door (despite multiple attempts at weather striping). I think there is nothing for it but to find someone who can remove the door and frame and rebuild them. (Too bad Tom King doesn't live next door). It will have to wait till Spring. Quote
Jfitz Posted January 3, 2018 Report Posted January 3, 2018 Ugh! Definitely not good for the comfort level.....nor for the heating bill! Quote
RichardA Posted January 3, 2018 Report Posted January 3, 2018 Now this is a case where we folks in the South excel. We would use redneck chrome on both the outside of the crack and the inside. Yeah, to cold for the outside to stay in place. Ever hear of a propane torch to warm up the wood and chrome? Quote
Chestnut Posted January 3, 2018 Report Posted January 3, 2018 That makes me curious on a good way to fix that. My first thought was epoxy but that's hardly period accurate. Case of wood movement rules violated? Also it's not that cold there. your 3 day history doesn't have any double digit negative numbers. Quote
minorhero Posted January 3, 2018 Report Posted January 3, 2018 In the meantime there is duck tape. It will keep the wind out. Quote
Jfitz Posted January 3, 2018 Report Posted January 3, 2018 16 minutes ago, minorhero said: In the meantime there is duck tape. It will keep the wind out. Useful for when your ducks become broken. as for duct tape I believe that's the "redneck chrome" mentioned above... 1 Quote
wdwerker Posted January 3, 2018 Report Posted January 3, 2018 1/4" or 3/8" backer rod and a putty knife ! Quote
AceHoleInOne Posted January 3, 2018 Report Posted January 3, 2018 Good Lord, that sucks. Man, it's been so cold here too. Having to use a hair dryer every couple of days to defrost my windows. Swear to god, I have 3/4 inch of ice build up on the inside. Damn cheap aluminum builder windows -Ace- Quote
Popular Post minorhero Posted January 3, 2018 Popular Post Report Posted January 3, 2018 32 minutes ago, Jfitz said: Useful for when your ducks become broken. as for duct tape I believe that's the "redneck chrome" mentioned above... Thankfully someone made duck tape so now no matter how you say it you still get fiber reinforced tape. 4 Quote
Jfitz Posted January 3, 2018 Report Posted January 3, 2018 10 minutes ago, minorhero said: Thankfully someone made duck tape so now no matter how you say it you still get fiber reinforced tape. Quote
Tpt life Posted January 3, 2018 Report Posted January 3, 2018 As a builder, we carried temporary doors of various sizes. We would hang a door and rebuild that one on a bench. Quote
Chet Posted January 3, 2018 Report Posted January 3, 2018 1 hour ago, RichardA said: Now this is a case where we folks in the South excel. We would use redneck chrome on both the outside of the crack and the inside Heck Rick, I am out here on the left coast and had the same thought, nothing redneck about it. You guys just might have a higher volume of usage. 1 Quote
Bankstick Posted January 3, 2018 Report Posted January 3, 2018 It's so cold: I caught a fish and it had fur instead of scales. The brass monkeys were complaining. 2 Quote
Chestnut Posted January 3, 2018 Report Posted January 3, 2018 If your going to use a fiber mesh tape at least be classy about it and try and camouflage the repair. 2 Quote
shaneymack Posted January 3, 2018 Report Posted January 3, 2018 Just curious how cold it actually is? Quote
Chestnut Posted January 3, 2018 Report Posted January 3, 2018 32 minutes ago, shaneymack said: Just curious how cold it actually is? We had a 7 day streach of lows around -26C with 1 day that had a high above -18C. Chicago area was a bit warmer but not much. I went to a wedding over new years and it was around -32C. Quote
shaneymack Posted January 3, 2018 Report Posted January 3, 2018 3 minutes ago, Chestnut said: We had a 7 day streach of lows around -26C with 1 day that had a high above -18C. Chicago area was a bit warmer but not much. I went to a wedding over new years and it was around -32C. Pretty similar to here. We had one day that hit -42c with the wind chill. Most days were in the minus thirties with the wind chill. Quote
Cliff Posted January 3, 2018 Report Posted January 3, 2018 Know how this goes. In the middle of IL it reached to -18F, around -37F with the wind. That was NYE night. Quote
Popular Post AceHoleInOne Posted January 3, 2018 Popular Post Report Posted January 3, 2018 41 minutes ago, shaneymack said: Just curious how cold it actually is? I'll take the bait...how cold is it...the hookers are charging $20.00 to blow on your hands!!!!! -Ace- 3 2 Quote
treeslayer Posted January 3, 2018 Report Posted January 3, 2018 -21 here in Iowa the last few days. Should warn up to zero soon 1 Quote
MattF Posted January 3, 2018 Report Posted January 3, 2018 57 minutes ago, shaneymack said: Just curious how cold it actually is? Colder than a well diggers ass! Quote
Mark J Posted January 3, 2018 Author Report Posted January 3, 2018 Yeah the temporary repair will involve tape. Probably Blue tape rather than Duck, I mean Duct... Ehhh.. Gray tape. (Or should that be Grey tape)? Definitely a more festive color and won't take off the finish. I think the definitive repair is going to require disassembly on a bench as suggested. The frame needs rebuilding, too. Or there's this solution, too: If I could get far enough South it would kill two birds with one stone. Quote
wdwerker Posted January 3, 2018 Report Posted January 3, 2018 Brass monkey cold ! The foam backer rod won’t leave adhesive on the door or hurt the finish. Quote
Marmotjr Posted January 3, 2018 Report Posted January 3, 2018 2 hours ago, shaneymack said: Just curious how cold it actually is? This morning, it was -8* f when I went out to my car. Our shop "insources" finishers from a shop in West Palm beach. They fly up here for a couple weeks at a time, work in the shop, and then rotate out. The current crew had a week or so off for xmas and New years. They flew in on the 3rd, they seriously discussed quitting right then. Quote
Chestnut Posted January 3, 2018 Report Posted January 3, 2018 2 hours ago, shaneymack said: Pretty similar to here. We had one day that hit -42c with the wind chill. Most days were in the minus thirties with the wind chill. I didn't bother with the wind chill numbers for me the air temp was depressing enough. 2 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.