Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Bathroom vanity

Featured Replies

I've been mentioning this for a while. The build is now underway. The vanity will be made from 3/4 walnut plywood. Domino case joinery. Shaker style doors and drawers. 77" wide, and 22" deep. This is what I'm working with 7f24b2092efb6391950b44284c23a9b4.jpg Cleaning up edges since factory edges are pretty terrible. 228a1def0281039e65391da5ad2526d1.jpg After I got the bulk of parts cut, sans cabinet floor. I started cutting out the toe kicks. 4e26a90adf39d7596ec55332c9f7f688.jpg Did the first with a jig saw, then rough cut the second, and flushed using a router bit. e45304ddc9dd4822ee2c4bf2f29d669b.jpg Sent from my 831C using Tapatalk

  • Replies 157
  • Views 22k
  • Created
  • Last Reply

Top Posters In This Topic

Most Popular Posts

  • Tom Cancelleri
    Tom Cancelleri

    Look, installed doors! Gotta give em a quick pass through the dum sander, then sand the frames. Install the slab drawer fronts, build the shaker drawer fronts now that the doors are on. Yay for relat

  • Tom Cancelleri
    Tom Cancelleri

    Wait for it.......                 Wait for it.......                   Almost there........  

  • Tom Cancelleri
    Tom Cancelleri

    Phil Collins glue up technique.    

This is awesome Tom! I felt like something was missing in my life the last little while and just figured out what it was. The absence of one of your build threads, lol! Its like getting a little part of a woodworking show every day. Look forward to this bud!

  • Author

It's probably gonna be pretty boring, nowhere near as exciting as my Roubo build thread which is possibly the biggest journal I'll ever do. I really learned that I don't like working with plywood. Hardwood is just nicer to work with. I will say though, the Roubo is amazing to work on, infinite clamping options. Sent from my 831C using Tapatalk

Great looking piece of ply, the finest of tools and the skill set is there. You can't go wrong!

Good start Tom!  I'll enjoy watching the build as much as I will seeing the bench in action!

I see that you used a backer sheet when ripping off the factory edges.   

  • Author

I see that you used a backer sheet when ripping off the factory edges.   

Since I don't have a 4x8 space on the floor to lay the piece down on foam, I put the 1" thick foam on my cabinet saw and set the ply on top and set my track saw depth to slightly cut into the foam. Sent from my 831C using Tapatalk

Sometimes plywood is just a necessary evil.  I was going to use all hard would to build my kitchen cabinets a number of years back but then the wiser me kicked in and I figured it was a waste of money to use hardwood on the sides of cabinets that would never be seen

I like high quality hardwood ply when it's used the way it's supposed to be used.  It wouldn't make much sense to build a bathroom vanity - or a kitchen full of cabinets - out of solid hardwood.  The biggest challenge is protecting the skins from damage while you're building...not much you can do to repair a dent or heavy scratch.  But I love ply for its dimensional stability, which opens up new design possibilities, and you can get a nice, clean, defect-free straight grain look with ply that is often difficult or impossible with hardwood...especially walnut.  It's all about using the correct material for the application.

It's probably gonna be pretty boring, nowhere near as exciting as my Roubo build thread which is possibly the biggest journal I'll ever do. I really learned that I don't like working with plywood. Hardwood is just nicer to work with. I will say though, the Roubo is amazing to work on, infinite clamping options. Sent from my 831C using Tapatalk

Like Coop said, you got great gear and skills. Never gets boring watching that!

I'm lucky  to have the room to cut full sheets of ply by my self on the cabinet saw but its a bit of a pain in the back..Look forward to your build Sir.

Good start man. I cut ply sheets the same way. I'm going to get the fes track saw once my circular saw finally dies. Unfortunately,  my circular saw is a craftsman 7" 3 hp model that was given to my dad as a college gradation present from his parents. It's over 30 years old,  still going strong as ever..

I'm thinking of building an MDF base for it to match to a shop made MDF track. Boom.. tracksaw.

Edited by Brendon_t

Kind of.  It doesn't plunge and it doesn't cut straight unless you guide it.  And no splinter guard on the off-cut side.  And no dust collection.  And no pretty green decals. :)

It plunges,  when you turn the rust covered wing nut, Pretty sure no saw cuts straight without being guided, who needs dust collection when you've got,  Gravity..  it doesn't have green but does have some red electrical tape on the cord, see, like I said,  it's pretty much the exact same. 

Kind of.  It doesn't plunge and it doesn't cut straight unless you guide it.  And no splinter guard on the off-cut side.  And no dust collection.  And no pretty green decals. :)

#fesnob. Me likey
  • Author

Are you making the counter top?

Nope, they are getting someone to come in and do granite countertops. Sent from my 831C using Tapatalk
  • Author

I figured I'd show you the awesome that is edge banding. Yes that iron says monokote, I used to be into RC planes and helicopters, it's the same edge banding iron they sell everywhere just with a different name... All made in China somewhere. 55cc601664a04f010f030a5922565a2e.jpgf467b5a63a6e5cdbb54739670c2cb383.jpg Sent from my 831C using Tapatalk

  • Author

Dude, quit wasting time with that Chinese iron

http://www.festoolusa.com/power-tools/edge-banders/hand-held-edge-bander-conturo-ka-65-574609

Ze Germans do eet bettah! If I were doing cabinets all the time, I'd have a conturo. As it is though, if I'm spending $4000 on a tool it's a sawstop or a big huge bandsaw Sent from my 831C using Tapatalk

Looks great Tom.  Nice job on the edge banding.  Tedious as hell.  Are those the festool rail extensions/connector things?  Do they work well?  I've always wondered if they introduce any play into it.

  • Author

Looks great Tom.  Nice job on the edge banding.  Tedious as hell.  Are those the festool rail extensions/connector things?  Do they work well?  I've always wondered if they introduce any play into it.

Thanks Brian. Those are Festool rail connectors. They work well if you take 2 minutes to connect the rails together. You use 2 connectors, one goes on top, one on bottom. Snug down the screws a bit (not too much so you don't dent the rails) have the saw on top of the part where it connects so it is lined up perfectly. I check with my 36" woodpecker straight edge to make sure it's completely straight. 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.