Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Cherry platform bed with storage

Featured Replies

I was supposed to start on this a year ago but convinced my wife that a new bench would make this bed easier. We are going from a queen to a king, and to gain space back in the bedroom, getting rid of a dresser so storage under the bed is a requirement. Here is the design I came up with. 

Bed.thumb.png.ee4efed467292c9d4cb7069b62

I didn't realize it at first but this project is going to take a lot of wood! I bought over 100 BF of 8/4, 6/4, and 4/4 cherry plus 5 sheets of birch plywood and that doesn't include the drawers. 

16E0F225-D277-452D-9B1D-3998043254D6_zps

I glued up the legs tonight so one side will be bookmatched. I have the legs at 3" in the design but I think I can finish these at 3 1/2" which might be better with the big headboard and footboard. 

A3B3D7EB-0472-4CC9-A82F-7BE3E457EE3D_zps

32150DE8-4784-4D62-916B-161EADAC386E_zps

 

  • Replies 148
  • Views 27.6k
  • Created
  • Last Reply

Top Posters In This Topic

Most Popular Posts

  • Had to go with floating nightstands to allow drawers on platform to open. Wife wanted simple boxes and that's what she got! Used the Ibox and same garnet shellac and waterborne sprayed finish same as

  • Bed is assembled, mattress is being delivered tomorrow, and all I have to do is cut drawer fronts to size and finish. You guys think 1/8" gap between drawers is good?

  • This monster is finally done! Final tally is 125 BF of cherry purchased, 7 sheets of 3/4" plywood and 1 sheet of 1/2" plywood. Finish is garnet shellac followed by satin water-based poly all sprayed.

Posted Images

The design looks great. What are 5 sheets of Birch for if not the drawers?

Sent from my SAMSUNG-SM-G890A using Tapatalk

Awesome Mike! I look forward to following along!

Sent from my SM-N910W8 using Tapatalk

Really looking forward to following along with this one. I'm trying to finish up a bed right now also, your certainly right about how much wood it takes.

  • Author
10 hours ago, sheperd80 said:

The design looks great. What are 5 sheets of Birch for if not the drawers?

Sent from my SAMSUNG-SM-G890A using Tapatalk

The plywood is for the toe kick, cabinet, and mattress platform which I'm going to follow FWW 240 pretty close. I have enough cherry for the false drawer fronts but don't have any material for the drawers. I'm going to use solid wood for the drawers (soft maple...or maybe alder but might be too soft) and cherry for the front and use dovetails (or maybe box joints). 

Now I wonder if alder might look nice for the panels of the headboard and footboard? It's a little lighter than cherry and don't think will darken with age but has similar grain. Might need to do a test board...

The drawers are going to be pretty big around 24"x24" and the FWW article used 3/4" plywood. Going with solid wood do you guys think I should use 5/8" or 3/4" for the drawers?

@estesbubba I made the drawers for my bed storage out of redwood and made them 5/8" and they worked out just fine. If it comes to reducing cost it'd say go for it a lighter drawer is always nice. My all redwood drawers are really lightweight, i can open and close them with my feet.

I made mine from 3/4" BB, they are about 20 x 20 and they look way over done. 5/8" would have been a better choice for me but I'm not changing it now.

I use 5/8 Baltic for most of my drawers. 5 mm dominos work great for the corners. It actually measures 19/32 or 15 mm thick   So a 5 mm domino centered is ideal. On bigger drawers I use a 1/2" or 3/8" ply bottom. Rabbet the edges to fit into a 1/4" groove. I leave 1/2" below the groove.

KV full extension slides with overtravel pull out an extra 1 1/2" KV8505 I think.

KV 8405 works too & costs less.

  • Author
  • Popular Post

A lot of prep work and milling going on this weekend. The legs are 3 1/2" square and they look a little big too me. I have them 3" in the plan and think I'll mill down to that. Otherwise the 6/4 rails look pretty skinny between them. 

638C3F4B-929B-4305-9E60-6B5A8A04D807_zps

Took my time with a batten laying out the curves. I would mark the bending point, draw the curve, then look at it. Took a few tries to get what I wanted but the curves look pleasing to my eyes. 

35C15F4B-E151-404D-9C51-9E8D2661B59C_zps

The finished 1/2" MDF template. Used my jigsaw since this was too awkward for the bandsaw.

C430D334-E5E9-41F1-BEDD-421241F92FE0_zps

All my 6/4 material is milled and now ready to make the 2 rails using the template. Working with cherry is always a pleasure but even more enjoyable after all the hard maple for the Roubo. 

Mike, what did you use to smooth the edges after using the jig saw? A flexible sanding block like Marc uses?

Nice job on the template!  Love all the detail!

  • Author
41 minutes ago, K Cooper said:

Mike, what did you use to smooth the edges after using the jig saw? A flexible sanding block like Marc uses?

Used my Ridgid edge and spindle sander for most of it then finished with standard hand block. 

40 minutes ago, TIODS said:

Nice job on the template!  Love all the detail!

Thanks Kev.

9 minutes ago, wtnhighlander said:

What material did you use for the batten to draw curves? I always seem to grab one with the worst possible grain, and break it.

I think it's white oak. 

Looks great Mike, cant wait to see the actual cherry piece with that profile !

Sent from my SM-N910W8 using Tapatalk

  • Author
9 hours ago, Chet K. said:

Oh Man!  At least it wasn't the freshly minted Roubo

 

9 hours ago, JosephThomas said:

Was that your new assembly table?

Yes glad it wasn't the Roubo and my new assembly table instead but still not happy about this.  Exactly why I built this was for glue ups and power tools but this was a bonehead mistake. I made sure both ends were outside the table but forgot it curved towards the table.  

  • Author

Much better evening in the shop as I finished jigsawing the top rails without cutting into anything I wasn't supposed to. There's something about using the jigsaw that kind of annoys me. I don't know if it's because I concentrate on the line too much or don't blink enough, but every couple of minutes I need to step back and take a 30 second break. Anyway the rough cutting went as planned then on to the router table. Since the top rails are 1 3/8" I had to make a first pass with a pattern bit using the template then take a 2nd pass using a flush trim bit. I think they came out good.

75A769E4-11CB-4307-89F3-2E3C32013667_zps

A7E0B8B7-E763-4E13-9900-B64A49386930_zps

One of the top rails against the wall to show the profile better.

A5DDB685-37BE-4014-85B9-FFA27950EC5E_zps

Had tearout in one area using the pattern bit. Any suggestions on how to repair it? I was thinking about epoxy mixed with cherry sawdust. I could also use cherry Timbermate. 

D006DF9C-1A9F-4ED0-815F-4E44396242A1_zps

I havent worked with cherry a whole lot but I'd imagine it'd be hard to patch with timbermate. Looks like youve got several colors right there.

.

Nice work though this is looking great!

Sent from my SAMSUNG-SM-G890A using Tapatalk

That looks fantastic.  No way I'd be patient enough to draw out those curves for the template.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.