Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

When life gives you scraps, make a shop stool

Featured Replies

  • Popular Post

Given the height of my new bench, I knew I wanted a shop stool a bit taller and wider for my ever widening butt.

While going through the bench scraps for a possible fire tomorrow, I pulled out enough leg material and found one full width board that would make a seat.

This is the first project to come off of the new bench and without vises, I've come to respect the versatility of hold fasts and battons.

Construction was quick and dirty. Half laps and an 8° compound angle for the leg splay.

The seat hollow cut on the bands saw then smoothed with a flap grinding wheel until I could hit it with 80grit.

It's comfortable and sits well. 17a6f558c862e413e75433c52f86e621.jpg

3dec28688d2180a4f1867006292a5df5.jpg

  • Author
14 minutes ago, wtnhighlander said:

Very cool. Looks like a saw horse for your butt. Butt horse? ?

Ha ha I like that better than butt saw. . I've already got a crack

I love it ! Butt horse !

I have so much respect for a craftsman that leaves the comfort zone of plans and goes freehand . Making something that fits your needs, your body with whatever is on hand gets back to the origins of our craft. Sign it and date it, be proud of it ( after all it was made to fit your ass ) !

  • Author
1 minute ago, wdwerker said:

 

Thanks Steve. After the roubo build, i was in desperate need of some off the plans work. I didn't measure a single thing on the whole stool.  I milled together, cut the legs with a stop block off of the first one,  lined them up and strick a line for the side stretchers.  Marked the stretcher end line off of the height of  the scrap piece on hand. I was extremely pleased that when mounted, there was only a tiny rock.  Three swipes with a block plane and sturdy as can be.

It was a great exercise in keeping it simple.

Nice stool! What are the approx dimensions and how'd you join the seat?

He measured his butt, and went wild from there...  Nice job Brendon, Danish oil finish?

  • Author
9 hours ago, lewisc said:

Nice stool! What are the approx dimensions and how'd you join the seat?

I know the seat is about 9" deep and my butt plus 1.5"on each side wide. 

The height was aiming for about 26" allowing 2" for top thickness so the legs are about 24". 

The seat was joined with my keurig k2 (pocket holes) 

7 hours ago, RichardA said:

He measured his butt, and went wild from there...  Nice job Brendon, Danish oil finish?

Watco tung oil, same as my bench. 

1 hour ago, Immortan D said:

Is it fluffy?

 

My butt or the seat? 

3 hours ago, Brendon_t said:

keurig k2 (pocket holes) 

Did you use your kreg coffee maker right before writing this post? :P

 

  • Author
5 minutes ago, JosephThomas said:

Did you use your kreg coffee maker right before writing this post? :P

 

No,  if you go to the coffee thread? Someone said the keurig is the kreg jig of coffee. 

  • Author

I do not but would be happy to give you the actual measurements if you want. 

1 hour ago, Brendon_t said:

I do not but would be happy to give you the actual measurements if you want. 

Butt surface may vary.

Considerations

(a) As long as you are protected from splinters

(b) You have nice scraps

18 hours ago, Brendon_t said:

I do not but would be happy to give you the actual measurements if you want. 

would love it.

  • Author
7 hours ago, collinb said:

Considerations

(a) As long as you are protected from splinters

(b) You have nice scraps

Butt well protected. 

During my bench build, i kept a 30 gallon pale of all the cutoffs and scraps.  Since the bench had very few small pieces, I never really went through cutoffs to use them.  

I normally only keep a milk jug of small scraps and 5 gallon bucket of 24"long or better cutoffs.  If it doesn't fit, I toss it or something else to make room 

1 hour ago, socoj2 said:

would love it.

I'll tale some measurements tonight. 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.