Popular Post Barron Posted April 2, 2017 Popular Post Report Posted April 2, 2017 My wife gave me a Windsor Chair making class at the Springfield, VA Woodcraft store and this was the weekend. A lot of fun over three days and while I still have more work to do, I am very happy with the result. Which leads to a question. For those out there that have built one of these, how did you finish it? I know many are painted, and gel,stain is an option, but I'd like your suggestions. Thanks. 11 Quote
wdwerker Posted April 2, 2017 Report Posted April 2, 2017 One of those multiple layer rubbed through paint finishes to make it look old would be fun. Then sign it and date it just to prove its new and you made it ! Quote
Coop Posted April 3, 2017 Report Posted April 3, 2017 Darn nice job there Barron and I'm glad you enjoyed the class. Great gift from the wife! Quote
mat60 Posted April 3, 2017 Report Posted April 3, 2017 Glad you had a good weekend. Chair looks great, Quote
treeslayer Posted April 3, 2017 Report Posted April 3, 2017 great work Barron, and a very nice gift to boot! be sure to show us what you end up with finish, to me it's too nice to paint. Quote
Chet Posted April 3, 2017 Report Posted April 3, 2017 What a great gift, she must love you! The chair looks great. Quote
wtnhighlander Posted April 3, 2017 Report Posted April 3, 2017 What species was / were used? The photo looks like the seat platform differes from the rest, but that's all I can tell. Perhaps the chair will terrific with just a durable clear coat? Arm-R-Seal to the rescue! 1 Quote
Barron Posted April 3, 2017 Author Report Posted April 3, 2017 The legs are maple, the seat poplar and the spindles and arm are red oak. My concern is that a clear coat on three different woods might not look great. I think gel stain might allow me to match the different woods better. Also, is there a way to move this post to the general woodworking page or finishing? Not sure how I posted this under power tools. 1 Quote
wdwerker Posted April 3, 2017 Report Posted April 3, 2017 If your going to try any stain practice on scraps of each type of wood several times before you tackle your chair. Paint is always a fall back option . Quote
wtnhighlander Posted April 3, 2017 Report Posted April 3, 2017 Those three species will definitely look different under stain. Paint, or a good seal coat followed by a heavy coat of gel stain / glaze, is your best bet. Anyway, except for the seat, the components are too small to show off the grain, so an opaque finish really won't hurt at all. Quote
Tom King Posted April 3, 2017 Report Posted April 3, 2017 Looks fantastic!! Definitely do a traditional finish on such a traditional design. I'll need to build about three dozen in a couple of years. Quote
Chet Posted April 3, 2017 Report Posted April 3, 2017 45 minutes ago, Barron said: Also, is there a way to move this post to the general woodworking page or finishing? I moved it to Project Showcase Barron Quote
Llama Posted April 4, 2017 Report Posted April 4, 2017 I like the way milk paint looks on these. You can apply BLO over the milk paint to give it a nicer look. 1 Quote
Ronn W Posted April 4, 2017 Report Posted April 4, 2017 Very nice. I am afraid of chairs - need to take a class. I like it. Quote
Barron Posted April 4, 2017 Author Report Posted April 4, 2017 The legs are maple, the seat poplar and the spindles and arm are red oak. My concern is that a clear coat on three different woods might not look great. I think gel stain might allow me to match the different woods better. Also, is there a way to move this post to the general woodworking page or finishing? Not sure how I posted this under power tools. Thanks Chet K! chopping with the adze and gouge was physically hard, but also fun. I would not describe building it as hard, but having someone who knows what he or she is doing helps overcome the 'fear' factor. Quote
Tom King Posted April 4, 2017 Report Posted April 4, 2017 I looked through some of my old books today on 18th Century paint making. Most of such information comes out of old cook books. It looks like you are stuck with modern milk paint. Google brings up many variations of Windsor chair finishes. The old recipe for paint starts with boiling a piece of fresh hide, then mixing in various things that would be equally hard to find, and even toxic like lead. Anything I've ever painted with this stuff has been well received by the Hysterical Experts: http://old-village.com/ Their website is sort of strangely laid out. Prices are on the obituary page, as well as the order form. It's not cheap, but not too bad either. Everything they make is the same price per volume. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.