Recommended Posts

  • 4 weeks later...
Posted

I put a/c in my shop this spring. Wow, what a difference it makes.

What kind of CNC are you getting?

You'll use the heck out of that bench. I made one of Timothy's MFTC tables a few years ago on a CNC and use it much, much more than my classic bench. I made outfeed tables with the 20mm MFT top. 

  • Like 1
Posted

I didn't get a cnc. I had a local cnc shop do the mft top for me. 

Yeah I got the feeling I'll use this a whole lot more than my last bench. I can't wait!

Posted
3 hours ago, estesbubba said:

You should have enough sawdust on your floor to mix with epoxy and fix that corner :D

Bench is looking great!

Interesting idea. I did not think of that.

 

Posted

I ended up doing the epoxy. I put so much mdf dust in the mix that it took 5 hours to solidify. Oops. 

I didn't take any pics of what I did today. But I milled up the hickory for the trim and routed the dado for the t track from LV. 

Posted

So this week I finally got sick of not going to the shop when I get home from work. Since I am usually the one that cooks, I basically have 30-40 mins between the time I get home and the time I start cooking. Then maybe two hours before bed. So I forced myself to go out and work in that 30-40 mins. 

It might have been a mistake because I managed to cut 3 out of 4 trim pieces too short. Ranging from 1/16th inch up to a full 1 inch. I don 't have enough hickory to really deal with that and since it's shop stuff I just went right on trucking. But pretty irritating to be so thoroughly stupid. 

Regardless, I'm getting somewhere. This is seen in it's most flattering angle. I've also discovered that either the holes are not exactly 20mm or the rail dogs and bench dogs I bought from Precision Dogs are too big. It's an EXTREMELY tight fit. So tight that I have to use something to pry them out. 

20170804_174951.thumb.jpg.6574b59ca9c37fed100b00ff6e256e4f.jpg

  • Like 1
Posted

Cliff- though it feels like a tough road right now, it is looking great. Once you are done and able to use that table you are going to put all these thoughts behind you. 

Keep it up. It's looking great!

  • Like 1
Posted

Taped some sandpaper to my burnisher and started in. Got 25 holes done in about 30 mins. Trying to be careful not to make the fit too loose. Only 137 more holes to go. 

 

20170815_174724.jpg

  • Like 1

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   0 Members, 0 Anonymous, 65 Guests (See full list)

    • There are no registered users currently online
  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,009
    Total Members
    3,644
    Most Online
    Joseph b
    Newest Member
    Joseph b
    Joined