Coop Posted December 16, 2017 Report Posted December 16, 2017 I bought a ‘98 Delta spindle sander a few years ago in a garage sale and my reindeers just ate it. Apparently it didn’t have much life left in it. As my son bought me a belt/disc sander last year for Christmas, I don’t need the combo as has been recommended on here previously, just the spindle type for inside radius sanding. Can anyone recommend a good decent priced one? Quote
Marmotjr Posted December 16, 2017 Report Posted December 16, 2017 Well... I jumped on here specifically to recommend the Ridgid combo one that everyone here says to get. Picked it up a few weeks ago, and I'm considering giving my belt/disc sander to my brother now. Probably won't but I know I'll use it a lot less now. I know I had the WEN OSS tagged in my Amazon wishlist as a future purchase, but I obviously can't give it a recommendation, other than the other tools of theirs I've tried. But I guess the question is do you want a floor standing one or a benchtop? Quote
drzaius Posted December 16, 2017 Report Posted December 16, 2017 Here's something to think about. The Ridgid is not much bigger than a spindle only sander. And an oscillating belt sander is the bee's knees, giving a smoother finish & longer belt life. 1 Quote
Chet Posted December 16, 2017 Report Posted December 16, 2017 I have the Grizzly bench top model, I think it is around $150. Grizzly Oscillating Spindle Sander And I have been surprisingly pleased with it. The dust collection is real good, a lot better then I would have thought. The couple of things that I would say were Cons but pretty minor. One, the plates that go around the different sized drums drop in to a recessed area and were not quite thick enough, so they sat just below the surface, this is more of a problem with smaller work, but I put some shims in the recess and everything is fine now. The other thing I wouldn't mind is a little bigger surface. Quote
ben_r_ Posted December 16, 2017 Report Posted December 16, 2017 "good decent priced one" is a relative thing. Whats the most you're looking to spend? Quote
Chestnut Posted December 16, 2017 Report Posted December 16, 2017 I have the WEN OSS and it works well i've used it on raindeer. Quote
Coop Posted December 16, 2017 Author Report Posted December 16, 2017 26 minutes ago, Marmotjr said: Well... I jumped on here specifically to recommend the Ridgid combo one that everyone here says to get. But I guess the question is do you want a floor standing one or a benchtop? Can the Ridgid be used as a Spindle only, say for inside radius of a circle? Definitely want a bench top. Chet, the one I have has an 18” dia. table and I find that handy. One of the reason I’m kinda not looking at the Wen. I do see where Grizz has an 18” model and it’s slightly on sale as well, which fits my budget, but weighs in at around 50#. Although I don’t use it everyday, i’d Like to have the cake and eat it too I’d kind of like to spend $300 or less. Thanks all for the quick response Quote
Marmotjr Posted December 16, 2017 Report Posted December 16, 2017 18 minutes ago, K Cooper said: Can the Ridgid be used as a Spindle only, say for inside radius of a circle? Definitely want a bench top. Absolutely! It's one of those hybrid tools, but this one actually works! I've been sanding reindeer all day using the 1/2" spindle. Took a break and worked on some other stuff, needed the O-belt sander, and it took about 30 secs to swap over. Another 30 secs to swap back. It comes with a range of spindle drums up to 1.5" I think. RIDGID Oscillating Edge/Belt Spindle Sander-EB4424 - The Home Depot Dang, now that I read the description, it barely even describes the spindle part of the sander, and shows no pictures of it! I use it more for that than the belt! 1 Quote
wdwerker Posted December 16, 2017 Report Posted December 16, 2017 Oh yea, the Ridgid comes with the full range of spindles and the belt unit too. The belt does a much better job , the osselation prevents the parallel scratches you get from a regular belt/disc. I think it's around $200 and easy to pickup at the big orange box . Quote
Popular Post Coop Posted December 16, 2017 Author Popular Post Report Posted December 16, 2017 And it’s close enough that it will be here in time to go under the tree to surprise me!!! Ridgid it is. Thanks again everyone!! 3 Quote
RichardA Posted December 16, 2017 Report Posted December 16, 2017 34 minutes ago, Tom King said: What's wrong with the Delta? It's old and worn out like him. 1 Quote
wdwerker Posted December 16, 2017 Report Posted December 16, 2017 I haven't been impressed with much of the benchtop tools Delta sold or sells now. Quote
wtnhighlander Posted December 17, 2017 Report Posted December 17, 2017 Coop, for doing reindeer, grap a couple extra spindle sleeves. The smaller diameter sleeves don't last all that long. Not enough surface to deal with the work that I ask of them, presumably. 2 Quote
Popular Post Coop Posted December 17, 2017 Author Popular Post Report Posted December 17, 2017 The Delta just started slowing down, almost to a stop. It only has one capacitor and the brushes aren’t readily accessible and I checked and a new motor is over $150.00 and not available. I have an old washing machine motor that I could use but then it would only go back and forth until it got to the spin cycle 1 3 Quote
bleedinblue Posted December 17, 2017 Report Posted December 17, 2017 I need to figure out a solution for dust collection with the Ridgid. I know I saw at least one guy on the tube who build a shroud for it, but thats going to seriously block the spindle and make it difficult to maneuver the work piece around. Also....while we're on topic, the smallest sanding sleeve doesn't have a rubber insert. How in the heck do you use that one? Quote
wdwerker Posted December 17, 2017 Report Posted December 17, 2017 I used a "Big Gulp Dust Hood" and made a face out of plywood to fit it to the machine. But I did it on my big 6"x 89" osselating belt sander. Quote
RichardA Posted December 17, 2017 Report Posted December 17, 2017 6 hours ago, bleedinblue said: I need to figure out a solution for dust collection with the Ridgid. I know I saw at least one guy on the tube who build a shroud for it, but thats going to seriously block the spindle and make it difficult to maneuver the work piece around. Also....while we're on topic, the smallest sanding sleeve doesn't have a rubber insert. How in the heck do you use that one? It slides right over the post. Quote
Tom King Posted December 17, 2017 Report Posted December 17, 2017 https://raleigh.craigslist.org/tls/d/jet-spindle-oscillating-sander/6428033094.html Quote
Steve B Anderson Posted December 17, 2017 Report Posted December 17, 2017 I have the Ridgid combo but I have trouble getting the fold down table square to the spindle. Does anybody else have this issue or do I just have a lemon? Quote
Coop Posted December 17, 2017 Author Report Posted December 17, 2017 2 hours ago, Tom King said: https://raleigh.craigslist.org/tls/d/jet-spindle-oscillating-sander/6428033094.html I’d be all over that if it were closer. 1 hour ago, Steve B Anderson said: I have the Ridgid combo but I have trouble getting the fold down table square to the spindle. Does anybody else have this issue or do I just have a lemon? @RichardA said he had the same problem. Quote
wtnhighlander Posted December 17, 2017 Report Posted December 17, 2017 Coop, my Rigid sander is about a year old, so I can't say if it has design changes over previous models. The dust collection using a shop vac (high velocity) is pretty decent. Not perfect, but not bad, either. 1 Quote
Marmotjr Posted December 17, 2017 Report Posted December 17, 2017 14 hours ago, wtnhighlander said: Coop, for doing reindeer, grap a couple extra spindle sleeves. The smaller diameter sleeves don't last all that long. Not enough surface to deal with the work that I ask of them, presumably. Picked up a WEN combo pack. 6 sleeves each of 80, 120, and 240. On the same item page they also sell packs of a specific grit. Prime shipping and a decent price. https://www.amazon.com/gp/product/B01HD4E7WM/ref=oh_aui_detailpage_o08_s00?ie=UTF8&psc=1 13 hours ago, bleedinblue said: I need to figure out a solution for dust collection with the Ridgid. I've plugged mine into my DC with a 2.5" Hose extension, seems to work pretty good. Dust gets sucked into the vents and hole very easily. But it should plug into a Shopvac with no issues. Quote
bleedinblue Posted December 17, 2017 Report Posted December 17, 2017 My shop vac plugs in easily but its always seems like 80% of the dust escapes. Maybe my expectations are just too high. Quote
gee-dub Posted December 17, 2017 Report Posted December 17, 2017 People have made improvements. Mine was pretty simple. Others have done more. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.