Popular Post Mark J Posted January 11, 2019 Popular Post Report Posted January 11, 2019 If I remember, Coop is having surgery today. Good luck @K Cooper hope the outcome is perfect and recovery is fast! 4 Quote
treeslayer Posted January 11, 2019 Report Posted January 11, 2019 Looking forward to your return Coop, get better soon. i know Sharon will take great care of you. 1 Quote
Coop Posted January 11, 2019 Report Posted January 11, 2019 Mark, good memory and thanks from all but I rescheduled it. Gonna get a second opinion today. 1 Quote
Woodenskye Posted January 11, 2019 Report Posted January 11, 2019 4 minutes ago, K Cooper said: Mark, good memory and thanks from all but I rescheduled it. Gonna get a second opinion today. And then a third and fourth, just keep kicking that can down the road! 2 Quote
Popular Post treeslayer Posted January 11, 2019 Popular Post Report Posted January 11, 2019 7 minutes ago, K Cooper said: Gonna get a second opinion today. You're going to ask us right 3 Quote
Mark J Posted January 11, 2019 Author Report Posted January 11, 2019 For sure! We'll give you second opinions for free! 1 Quote
Popular Post Chet Posted January 11, 2019 Popular Post Report Posted January 11, 2019 Actually you are going to get our opinions whether you want them or not. Thats just how we do things around here. Have you tried duct tape? 1 4 Quote
Mark J Posted January 11, 2019 Author Report Posted January 11, 2019 +1 on duct tape. Or for something with more water permance there's CA glue. 1 1 Quote
Bankstick Posted January 12, 2019 Report Posted January 12, 2019 CA glue was originally used for surgical incisions. It sets up through exposure with moisture which is the main ingredient of tissue. I cut my thumb and if I had been thinking, I would have used CA glue and saved $310. I asked my doctor for a second opinion. He said, "You're ugly, too." Quote
RichardA Posted January 12, 2019 Report Posted January 12, 2019 30 minutes ago, Bankstick said: CA glue was originally used for surgical incisions. It sets up through exposure with moisture which is the main ingredient of tissue. I cut my thumb and if I had been thinking, I would have used CA glue and saved $310. I asked my doctor for a second opinion. He said, "You're ugly, too." However true that Dr's remark may be, you're still out $310, and he's not. 7 hours ago, Chet said: Actually you are going to get our opinions whether you want them or not. Thats just how we do things around here. Have you tried duct tape? Or 23 ga. pins? Quote
wdwerker Posted January 12, 2019 Report Posted January 12, 2019 If a 23 ga pin deflects and comes out the side of a board you are holding it's like getting a flaming hot splinter ! Thankfully it only hit the meat of my fingertip. Still was sore days later. 1 Quote
Coop Posted February 1, 2019 Report Posted February 1, 2019 A customer has his own crating department to ship his custom made commercial kitchen equipment. The carpenter had a bad habit of keeping the trigger pulled on the nail gun and letting the safety fire the gun. One shot bounced the gun up and it landed back down on his finger, attaching it to the board. 3 Quote
DerekMPBS Posted February 1, 2019 Report Posted February 1, 2019 My dad was a contractor who built in the 80's and 90's. His nail guns were the old Senco units, and the framing gun weighed about 20 pounds. They were framing a 4-plex and were putting up walls, and my brother was nailing. He was standing there with the gun in his hand, waiting for them to lift a wall, when the gun fired. My dad looked at him, he looked at my dad and said "I just shot myself in the leg". Sure enough, there was a 16 penny sticking out of his calf through his coveralls. My dad grabbed a pair of pliers, pulled the nail out and they went back to work. I used that Senco framing nailer when we were building my house to nail off trusses as we set them. I'll tell you, holding that thing at chest level and out away from your body while nailing will make a man out of you. My arm was sore for weeks. I ended up buying a Porter Cable framing gun that is about half the weight of the Senco. 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.