Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Sapele Morris Chair (Final Photos)

Featured Replies

Super job, and I'm with Gee-dub, can't wait to see that sapele pop when you put the finish on. 

  • Replies 84
  • Views 24.3k
  • Created
  • Last Reply

Top Posters In This Topic

Most Popular Posts

  • I started this Morris Chair project about 3 weeks back.  I wasn't really planning on doing a detailed journal, but I have been taking photos along the way and thought I would share them here. I a

  • Some final pictures now that I got it back from the upholsterer. First off, on the copper pins I used a product called Everbrite to protect from tarnish.  I was doing some research on the interne

  • Today was the end of construction.  Tomorrow I will give a sanding just to give me a chance to go over it with a fine tooth comb.  Then a coat of shellac before spraying the finish.  Then off to the u

Posted Images

  • Author
13 hours ago, K Cooper said:

Chet, do you have a link?

No I don't Ken.  I guess the best way to describe it is it's like the car interior material that was used back in the 30's and 40's or even earlier.  It was usually gray or beige.

  • Author
  • Popular Post

I want to take some better pictures with proper lighting and after the upholstery is finished but I thought I would post a handful of pictures of the chair with finish and still in the shop.  the lighting isn't great but hope you get the idea.  The arms are actually book matched but you can't really tell because the way the ribbon grain in the sapele moves and the chatoyance in the wood.

I have my place in line with the upholsterers to take it in on the 6th of December anti will take them a week.  I didn't know this but they're industry has its own busy season and it turns out it is now.  I guess everybody gets there furniture all gussied up for their guest over the holidays.

I want to thank Mick S I was bugging him with several questions during this project.

IMG_1785.thumb.jpg.08bae87ccd7302530bb566fa7844ae0b.jpg

IMG_1822.thumb.jpg.ca234c20ddb30752921916898867bdc5.jpg

IMG_1796.thumb.jpg.13d9d70a267721dbb757efd215637e35.jpg

IMG_1815.thumb.jpg.cb6e003c9b0983012daf0385e1e03ce6.jpg

IMG_1806.thumb.jpg.5abec1da44af90818d3dac9e3553c022.jpg

IMG_1812.thumb.jpg.06aa1b6f1215a7ddee6e5449cc148bf7.jpg

IMG_1815.thumb.jpg.4d556e3b215298da4bed8fe1a8697def.jpg

IMG_1817.thumb.jpg.5923dbea2bcde82498a48ed7d67b48a0.jpg

IMG_1819.thumb.jpg.a139198ae6b1940eb6189640dd43f69e.jpg

Super result and I like the finish, you did a spray finish, right?

  • Author

I wiped on one coat of shellac and then sprayed three coats of GF High Performance.  The arms came out feeling a little rough and I couldn't figure out why.  I think but I may be wrong that in bending the wood it may have opened or stretched the pores some to where it was feeling rough.  Any way I sanded them back pretty good with 400 grit and then sprayed them again but laid it down a little heavier and they came out great.

Great job Chet! Those arm lamination's are the best I have seen yet, simply amazing! You gotta love Sapele great choice

Solid work the chair looks awesome. I like that your round over or easing edges is a bit less than what Marc does in the plans. I feel he is too heavy handed with it. Your edges look a lot more crisp and well defined and it gives a bit of a different look to the chair.

Beautiful job, Chet. I really like your side slat details. 

I was happy to give my input and I know you're more than happy with the results!

I'm looking forward to seeing it after it comes back from the upholsterer.

  • Author
  • Popular Post
2 hours ago, Chestnut said:

I like that your round over or easing edges is a bit less

Most of the edges were just eased with the sanding block, no round over bit.  The legs I chamfered just a bit at the router table to blend the veneer pieces I glued over the glue lines then I block sanded them to match the rest of the chair.

Very well done Chet! You Should be proud! 

  • 1 month later...
  • Author
  • Popular Post

I have been waiting for my turn to arrive at the upholsters and finally took it in last Thursday and should have it back in the next 2 or 3 days.  In the mean time my son in law was able to get the pivot and adjustment pins done for me.  Even this took a while because his company was moving to a new location and putting some new machines in.  So as it happened  they used my pins to test the set up of a couple of machines.  I am still deciding whether to go with the present finish or do a brushed finish.  I am leaning toward brushed, I am wondering if the present finish would look to flashy.  What is your opinions?

Here are a few pictures and the final results of the pins.  

IMG_1830.jpg.f247d80d2c85b1eaedbe7cf6f7ae3774.jpg

 

IMG_1831.thumb.jpg.df88c35c3c05da99db0612b9d81184d3.jpg

 

IMG_1832.thumb.jpg.11ddbce5e0683522d33c816236bb69df.jpg

 

IMG_1833.thumb.jpg.8acfd408c6b0b68c4f758fcebffb7337.jpg

 

IMG_1834.thumb.jpg.41ede523c34c7f50571ecbf8d394b351.jpg

I like the idea of brushed, that way they are less of an eye grabber, and softer looking.

How about a light patina? Just enough to dull the shine & darken it a bit.

  • Author
21 hours ago, drzaius said:

How about a light patina? Just enough to dull the shine & darken it a bit.

Making them even a little bit darker would concern me because of the final chair itself.  I don't want the pins to be a distraction - but do want them to be noticed.

33 minutes ago, Chet said:

Making them even a little bit darker would concern me because of the final chair itself.  I don't want the pins to be a distraction - but do want them to be noticed.

Well, whatever you choose will be fine. The pins (and the chair) are gorgeous.

  • Author
  • Popular Post

Some final pictures now that I got it back from the upholsterer.

First off, on the copper pins I used a product called Everbrite to protect from tarnish.  I was doing some research on the internet regarding rattle can lacquer as a finish on these and ran across some information on this product.  And just in case you need, they have a great customer service called with several questions and you could tell the person helping me new their stuff not just reading of an information sheet.  Everbrite is a product that is used to do exactly what I wanted.  It is use to protect things like weather vanes, metal cupolas, metal hoods over stoves and even things like copper jewelry.  You can wipe it on, brush it on or even dip your item.  It is self leveling and no bubbles, I noticed that even when you get a bubble in a few seconds it bursts and then levels, no sign of it.  Really a top notch product in my book.

Here is a few pictures of the seat cushion construction.  I provided the wood frame.  First they mounted the zig zag springs on the side of the frame that will be facing up.  There is a bow to the springs, you can see that in the piece  that is laying on the bench in the upper right corner of the picture.

IMG_4962.thumb.jpg.8c33adf97be9df90f41ea0961c02a618.jpg

Next they tie the springs to keep them aligned and they also attach some leather tabs to the two outside row of springs to keep the whole spring system stable and not feeling like its swaying from side to side when you sit on it.

IMG_4963.thumb.jpg.27f975cfd506e961609c8997fe54a0fd.jpg

Turns out these folks are just like us wood workers, sometimes they get so involved in what they are doing that they forget to take photos along the way.  But the next thing they do is put some kind of heavy polyester material over the springs so the foam and batten doesn't abrade against the springs.  This next picture shows the cushion after they put on the material looking at the bottom side.  The only thing missing at this point is the black fabric that they use to seal the bottom side off.

IMG_2875.thumb.jpg.72785a071527e797179772496c2a143d.jpg

And the final fit.

IMG_2868.thumb.jpg.8b22877277701fd5346b6e7c1852f770.jpg

Here are some pictures of the final product.

IMG_5927.jpg.b81b46e9b2ba9d084cbc6d2951949311.jpg

IMG_5928.jpg.460c689f64fdffdab690ab673960631b.jpg

I asked them to leave the back rest cushion a couple of inches short of the top of the back rest so that you would see some of the wood of the top slate.

IMG_5929.thumb.jpg.df1c78c96a7e2f866ecd13362f419953.jpg

The mohair fabric has sort of a chatoyance to it.  This next picture give a good image of the color.

IMG_5931.thumb.jpg.77bd9ba88d17236e1681d881a0d302f6.jpg

Here are a couple of pictures of the copper pivot and adjustment pins.

IMG_5932.thumb.jpg.c48ad1ce9520535d218294bc5a6ece98.jpg

IMG_5933.thumb.jpg.d18e1e050502fc93095d068bd0f090c4.jpg

I am extremely happy with how the upholstery turned out and over all I am really happy with the whole chair and it was definitely a fun project with a handful of firsts for me.

Thanks for following along.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.