Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Finishing

  1. Started by JesseCF,

    Hey all! So this was my first time finishing a piece of wood. Ever. Here are the steps I took. In even my limited retrospect, there are of course many issues. 1) Sanded wood with 120, 150, 180, 220 with a mostly OK random orbital sander my father has. The dust collector doesn't work so great and I didn't clean the sheet that often so that probably lent to issues. 2) Applied a linseed oil finish. Wood just kept sucking it up. 3) Consulted with a friend, proceeded with a 50/50 Miniwax quick dry poly high gloss and linseed oil mix. 4) Applied three or so coats, and with at least one of them I did not sand inbetween. Even when I did, I used the 220 aga…

  2. Hello folks, from a newbie -- I have a dining room table with a lacquer finish, which I believe probably was also waxed. From day one, it never cleaned up well, always seemed smeary and dull. We use the table constantly and even a simple wipe with a damp cloth would bring about the cloudy, smeary look. I finally decided to do something about it. So I started with the idea of cleaning off any wax, and then re-amalgamating the lacquer (because it had a messed up area where I ran a steam iron on the table with what turned out not to be enough layers of protection between table and iron). I brushed on lacquer thinner, which got rid of the messy area and some sma…

  3. Started by Cmac2008,

    Ok I have red oak face frames sanded to 220 and oil stained... They have set in my shop for awhile and collected some dust... I don't have the best luck using tack cloth to remove dust... I've read different things on people using mineral spirts to remove dust after stained... Will the MS mess up the stain????

      • Like
    • 7 replies
    • 3.3k views
  4. Started by Scott Bailey,

    I have been building a little box for the purpose of just practicing, well a lot of things (mostly to work on joinery). it's made from poplar which is of course cheap and rather boring wood, but seems to stain rather well (pretty tight pores). I got a couple different water based stains, tested on a few scrap pieces, and decided to go with the cherry stain just for color preference. I ran into problems when I figured I needed to stain part of it, let it dry, and then stain the rest. when I got to putting on part 2, no matter how careful I was, I could not avoid overlapping new stain on parts that had already dried, whether from drips or just being too difficult to …

  5. Started by bfiedler,

    I have been debating about buying an earlex for woodworking projects, but I figured if I could make it multipurpose, and paint walls, or my house with latex paint I could convince the lady of the house it was worth it. I did a search for "using earlex to paint a room". This was the first review I found: Now, I am not sure which part I think is funnier... the fact he thought he didn't have to tape anything, or the fact he did it with no protection on...

      • Like
    • 5 replies
    • 2.9k views
  6. Started by Bob Kemp,

    I had a branch on a Pine tree in my back yard I had to cut off after a storm earlier this year, and I cut the branch into manageable pieces & stored in my shop to dry out figuring I could make something with it later. it's later, and I have cut a section of the branch into 3" x 1/2" beverage coasters to give as gifts this Christmas. Once I sand them down to a smooth surface, I am not sure what kind of a finish would be best not only to protect them, but also taking into consideration how some glasses will sweat on them. I want to give gifts that folks will actually use for years, not once or twice & then discard because of a watery mess or problem. Any suggestions…

  7. Started by Bschermann,

    I know nothing about curly maple. The wood is all free. 4 coats spray lacquer only. I only want this pc to look as good as it can. The small blemishes on it only get bigger as I sand. Keeping in mind that I work on a balcony and a few hand tools. Opinions please. It's beautiful wood as is.

  8. Started by paul42,

    I saw this photo of a beautifully stained pecan slab. I tried various methods to get a similar look, but so far no luck. Anyone have experience with this? I really like the dark grain pop and color tones.

    • 6 replies
    • 18.4k views
  9. Started by Jasahan,

    Anyone know of some good ones? I've never ever ever used spray equipment before. Anest Iwata is donating some gravity feed guns to us. I tried looking on youtube for some and was frustrated. Thanks.

  10. Ive got two fenders for a Model-T that I need to hold together to sand them both so they are the same size and shape. I've cut them out of maple and I could use a clamp, but it would be pretty cumbersome as all I have are 12" irwin clamps and the pieces are 2" by 7" by 3/4" and its the 3/4" side that needs smoothing up. I was thinking of tacking them together with some tiny brad tacks but wanted to ask before I did to see if anyone had a better idea?

      • Like
    • 4 replies
    • 3k views
  11. Started by Mopardude,

    First time using any of General Finish products. I have a Entertainment center I made out of red oak which I stained with a general finish gel stain on Sunday. Turned out beautiful! Today (tuesday) I topcoated with general finish gel top coat. While i was aplying top coated I noticed the top coat was reactivating the stain and making it lighter. The person I am building this for I know prefers lighter looks so I was not worried and kept on top coating. When I was done I stood back and look at it and I realized when it was lightening up the color it did not do it evenly and it cam out very blotchy and uneven. Not Beautiful anymore. Doing some google searches the be…

    • 9 replies
    • 10.4k views
  12. Hi! I have watched the "A simple varnish finish" video multiple times. It's very informative but I'm stuck with a problem that's not addressed in the video. I'm close to finishing my first furniture project, an entertainment center. The grade A red birch veneer plywood is in really good shape so following the advice of many, I decided to just give it a light hand sanding with 180 grit paper before varnishing. Some of the boards have darker bands that don't match the wood pattern. Light sanding does not seem to make much difference. What causes this? Can it be fixed? I'm tempted to sand more but really don't want to sand through my very thin veneer layer. …

    • 3 replies
    • 2.9k views
  13. I scored a kitchen table and about 8 chairs for about $40. it good solid build but, it needs some repair work . The spindles on the chair legs are missing on some. they also rack around as if loose joints. I believe the table and chairs are oak. what would be a good way to strip them. never did this for wood . I have only worked with metal. I am also looking for a good source to find the spindles. I will post pictures when i find the cord to my camera . Any help or info would be great. ty

  14. Started by bfiedler,

    Hey guys, I've been asked to refinish some cedar siding that hasn't been touched in 15 years. It's all been under an awning, so it's been kept dry, but the sun as bleached some parts, while other sections still look brand new. I don't know what finish was on there before (most likely oil stain). How do I stain these again, but keep it from looking patchy? Sand it all down? Maybe stripper? I can post photos later, as I can't on my iPhone.

  15. Started by Scott Bailey,

    I hope this isn't a silly question but I am still fairly new to this and feeling a bit ignorant, and I have a "process" question that's probably really basic. I'm refinishing an outdoor table and chairs that I've had for years (and my 2 previous finishing efforts were less than poor, we'll just leave it at that). I've stripped off all the old finish no problem and revealed nice western red ceder, so I don't want to stain it at all. i'm going to put a simple oil/spar varnish blend on it. I've already tested on scrap and like it, even with the slight amber from the linseed oil which seems to really bring out the red in the wood... but I have not started finishing the a…

  16. Started by joshhulbert,

    Hello all - I have a bar/liquor cabinet that I've been working on. The majority of the cabinet itself is black walnut, and the top is Ipe. I'm just about ready to finish and have been doing some research to decide what exactly I want to use. On the walnut I have been leaning toward something like Watco Danish Oil - I dont want to modify the look of the walnut much. I want to keep the natural look of the Ipe as well, but I'm finding some mixed information on finishing it. Most of the results I find online deal with finishing it for outdoor usage on decks and so forth. I did find one recommendation on simply sanding it to a high grit and then using a paste wax on it. The…

    • 5 replies
    • 7.4k views
  17. Started by spltend,

    Hi there, I want to build a table with a tabletop that is painted with acrylic paint. When finished it will be about 90% covered in paint that I really don't want to fade but still needs to be functional as a coffee table. It's going to be in a room with lots of sunlight so I'm wanting to use something to finish it that has UV protection (unless there is a seperate product available that can be applied to give UV protection). I planned to brush or rub on Behlen Rockhard tabletop finish for other builds, but I believe this won't give the UV protection I need? I had considered using Helmsman outdoor finish but have read it's not a great indoor finish? Any suggestions …

    • 8 replies
    • 3.8k views
  18. I built a little bookcase for my son out of unfinished MDF and domino joinery. Here's how it started... Me: Hello Lowes associate, what's a good primer for unfinished MDF Lowes paint associate: You want bonding primer Me: Isn't that water based? Won't it raise the grain? Lowes paint assoc: Absolute not. This is exactly what you need <smash cut to me sanding and cursing for an entire evening> It wasn't too bad.... but my beading detail looks a bit bumpy. Not the end of the world. I read every forum and article about MDF and end grain, primer, etc., so I'm ok there. Last night I gave a quick spray can coat of Rustolium gloss enamel (that I had …

    • 8 replies
    • 2.9k views
  19. Ordered some finishing supplies from Woodcraft. The box they came in was perfect, but inside were two dented cans. I started an online chat to inform them they might want to be more careful in shipping/packing. I wasn't looking for a refund, freebie... I was just taking time out of my busy day to notify them and to help them run their business a little better. The response was so typical these days. Instead of putting the customer first, it was all CYA (cover your a$$). Instead of the customer always being right, they were compelled to win an argument (of their making) and tell me why they are right. The online chat person told me they often receive cans dented like t…

      • Like
    • 44 replies
    • 9.3k views
  20. Started by estesbubba,

    My wants me to paint the front door of our house barn red to match my new shop color. I have a Fuji MM4 and of course I want to spray it. It sprays GF milk paint great with a 1.8mm tip so that would be a good base to measure viscosity. So what would be a good outdoor paint to spray with? I assume I'll have to thin a bit using water and maybe some Floetrol.

    • 2 replies
    • 2.6k views
  21. Started by soko121,

    My wife has spent weeks painstakingly stripping our Butler Pantry to refinish it. the stain is Minwax Dark Walnut #2716 liquid stain. My question is, what is the best product to "protect" this finish, ie wax, oil, etc 2 products we need to know about, are Liberon finishing oil and Kramer's Antique Improver. Can either of these be used over the Minwax, and should anything else be put over the top of that ?? thanks

    • 1 reply
    • 2.9k views
  22. Started by skidonenko,

    In looking to repair/patch/keep from getting worse a Crack in a hard/rock maple table top. It is almost dead center in the top from one end about 3 feet in. It is a sentimemtal piece for my mother. The table was just moved from Michigan to Dallas TX so I figured what ever I do should wait a bit to acclimate to the climate. Option a: file with epoxy and clamp it back together Or don't clamp and leave the blemish. Option b: cut the top into 2 pieces and cut the Split out and join them back together Option c: what would you do?

      • Like
    • 9 replies
    • 3.7k views
  23. Started by PWRFULZ3R0,

    So I built a changing table and the wife wants it painted white to match everything else. I have a fuji 4 turbine, but have never sprayed paint before. At first I thought I would just use latex but after reading many forums it seems like acrylic is the way to go. Does anyone else agree with that and is there a particular brand to try or stay away from? I've brushed on General Finishes Snow White milk paint before (which is acrylic) and liked that product but spraying it thinned could be a whole different result. When we brushed it on we were ok with brush strokes since it was a rustic piece but we want this to look professional. Does anyone have experience with Sherw…

      • Like
    • 28 replies
    • 10.5k views
  24. Started by tim0625,

    A couple weeks ago, I VEHEMENTLY disagreed with someone on here about painting wood....I'll admit, I'm not a fan of putting blanket coats of paint on wood because I love grain but with the grand daughters, that probably isn't the best course of action.... so I come needing advice. My teenage grand daughters have very specific color themes in their bedrooms. I need some advice on finishing a keepsake box for each of them. I can build it out of most any wood but what I'm wondering is if there are dyes, tints, or techniques out there where I could make the box 'agree' with and compliment the room colors? Any advice is welcome. I'll list some photos and see what you all come …

      • Like
    • 6 replies
    • 2.7k views
  25. Hi all, I came across this forum through a search on ideas for finishing some Adirondack chairs I'm in the process of making for outdoor use. The chairs are all made from spruce, and have been lightly 'scorched' with a propane torch to highlight the grain/give the appearance that the wood is more exotic than it actually is! My concern is with regard to finishing them with a suitable varnish. Here in Ontario, Canada our summers can be very hot (+30C & up), our winters very cold (-25C & lower). These chairs will remain exposed to the elements beside our fire pit year 'round. I'm assuming a marine-grade exterior varnish will be best (and if so, oil/water…

    • 9 replies
    • 4k views

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.