Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

First stab .... chop?...at cutting boards

Featured Replies

Ok, so I chickened out on fancy end grain and wavy stripes. I was afraid of a total failure leaving me without enough time to start over before Christmas.

Anyway, here are a couple of edge grain, reversible boards, made from walnut and mulberry. Finished with a commercial beeswax / mineral oil blend.

Sorry the lighting is poor. Tried using the flash, but it came out kinda green...

e601a1676173a59cc66fd53b17da738b.jpg

Here's a better shot of one board, showing the grain:

a5c460710acfd16e0712b84d79786d7d.jpg

Thanks for looking.

Those look great bud!  Maybe you can try the other stuff when you have more time..  Looking at these, I'm pretty sure you won't have any issues pulling it off.

Very nice! I like the perpendicular grain arrangement.

You do damn nice work neighbor  Keep it up.   Well done, or should I say "Ya done good" for a Tennessee redneck!

There is always beauty in simplicity.  Be proud of your work.  Art, consciousness, civilizations… all progress is all made one sequential step at a time.  Ok enough "Confucius says" these are great looking cutting boards and like Tidos says when you have time you can tackle those different styles.

It really looks good !

So no one has any concerns about the cross grain joint? I am guessing about a foot of walnut cross grain glued with a tongue and groove joint to the mulberry side pieces. What's going to happen when the walnut expands or contracts ? Maybe I tend to err on the side of caution?

If I did the math right the walnut could move between 1/4 to 1/2"

So no one has any concerns about the cross grain joint?

 

LOL...that was my first thought when I saw the pictures but nobody else had said anything so I just assumed I was wrong and it was not a big deal. =p

In the end, it's a cutting board.  If it does move and create a problem, it's a cheap lesson.

 

I'd be willing to bet he's not going to see that much movement tho.  

Definite concerns about the cross-grain.  It WILL fall apart...the question is, when.  The good news is, like Kev said...it's a cutting board...a long grain board at that.  Head out to the shop and have a new one in an hour.

Strike that...taking a closer look, it appears he built them with "breadboard" ends.  I guess the question is if they're glued together or pegged from the bottom.

i don't think i would worry much. and if it does fall apart in a year, clean up the joint and reassemble

I too thought about the cross grain situation. With all the talk about cross grain and face to end grain gluing here lately I was surprised to see those cutting boards.

I know there is movement in wood but by the same token the air temp and humidity in a house doesn't change that much these days. With the heating and air conditioning systems keep temps fairly constant and if you have a furnace with a humidifier and an AC system with a dehumidifier all should be well. 

However, seeing that dining room table with the huge crack scared the bejesus out of me!

I've  had fairly good luck in most of my projects with the exception of one chess board that I made with the frame (floating, not glued) too tight to the field and blew out one corner. I think my son stored it in a damp basement for awhile. I remade a frame and gave it a bit more room to float the field and all is well now.

 

Rog

  • Author

Believe it or not, I considered movement in the cross grain joint, but figured that 10" of what is now "quarter sawn" walnut wouldn't move enough to matter. Especially considering the things are saturated with oil & beeswax.

Of course, if they end up in the dishwasher, all bets are off!

I also thought it was done on purpose from a breadboard end perspective, no?

I guess that depends on the glue up?

Very pretty, by the way

  • 2 years later...
  • Author
  • Popular Post

 

LONG-TERM UPDATE:

 

 

Since there was a bit of controversy with regard to the cross-grain joints on these boards, I thought you all might like an uodate.

 

 

After 2 years of daily use (and appropriate cleaning / care), the board we kept is in excellent condition.

 

 

f73c9fd57d0ebd5e9bb136da693ad699.jpg

 

 

There has been no sanding or scraping, no refurbishment of any kind. Yes, it has knife marks, but no splintering. The wax/oil seems to keep the walnut a rich, deep brown. Sunlight has darkened the mulberry wonderfully.

 

 

And the joints are still intact. The walnut has shrunk maybe 1/64", just enough that I can catch the joint with a fingernail. Well within the limits of PVA creep, it seems.

 

 

Meanwhile, the one I gave my SIL is sitting on display in her kitchen, "too pretty to use". Now it looks like a dried-up piece of scrap lumber.

 

 

12 hours ago, wtnhighlander said:

Since there was a bit of controversy with regard to the cross-grain joints on these boards, I thought you all might like an uodate.

And the joints are still intact. The walnut has shrunk maybe 1/64", just enough that I can catch the joint with a fingernail. Well within the limits of PVA creep, it seems.

Patience, grasshopper. :)

  • Popular Post

I'm still proud of everyone on the forum for not being a nerd hall monitor about food borne illness and open pore walnut.

Hey Ross - if you can confirm that nobody has died from using this cutting board, can we never discuss foodborne illness and cutting boards ever again?

Well done everyone.

That's a beautiful board. But I would not take that kind of a chance. It's worked out well so far, but what if you move across the country & the climate is different? Or if for some reason that board were to go into non-conditioned storage for a period of time?

I know, that's a lot of ifs, but why take a change on something beautiful that you have created?

So far so good.  I like your work.   Sharp looking board.

Good update. People freak about wood movement--in this case unnecessarily. I agree with your one response that your multiple strips of walnut  in a 10-12" width almost negates the cumulative expansion and contraction across the width. Personally, i wouldnt have run the boards perpendicular, but that is because i could have had the same aesthetic with 2-3 less steps involved. 

  • Author
Personally, i wouldnt have run the boards perpendicular, but that is because i could have had the same aesthetic with 2-3 less steps involved. 

Do you mean that you would just use face grain boards? I cut strips and rotated them for glue-up because I wanted more thickness. Honestly, the edge grain doesn't look much different than the face did.

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,012 Total Members
  • 3,644 Most Online
  • JAR Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.