Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Curly Haul

Featured Replies

That time of the month again.  Today I brought home about 130 bf of red maple.  A little more than half of it is wide, bright white, lightly figured ten foot boards.  The other less-than-half was this heavily figured juicy deliciousness.

No idea what the pictured pile will become but I do have plans for the lightly figured stuff...entertainment "cabinet" for the basement when it's finished.  So...never.

 

DSC_0037_3.jpg

 

DSC_0043.jpg

That time of the month is always irritable for me, apparently not your case. Nice haul. Where do you store your lumber for " future projects"?

  • Author

That time of the month is always irritable for me, apparently not your case. Nice haul. Where do you store your lumber for " future projects"?

Lumber storage is becoming a problem.  I've got two racks nearly filled on one side of the shop.  I just built another on the opposing wall and it's half full too.  My shed, which is supposed to house my mower and lawn equipment and other miscellaneous crap that usually goes in a garage...is now bursting at the seams full of lumber.  My mower is out in the rain.  I'm not kidding. :lol:  I've also started to put boards in the basement.  I'm either gonna have to start throwing things away to make more room or build a bigger shed or rent a storage locker.  Yes I know it's a good problem to have but it is a problem nonetheless.  Too much wood.

Very nice!! How much per BF you pay?

Zero :)

But if you were to buy it...$3.90 for regular octane, $7.25 for premium.

That time of the month is always irritable for me, apparently not your case. Nice haul. Where do you store your lumber for " future projects"?

E stores his future project wood in the 10 lumber sheds he has on his massive St. Louis homestead!  Eric's gonna have fun passing all that wood over the new jointer. 

I'm either gonna have to start throwing things away to make more room or build a bigger shed or rent a storage locker.  Yes I know it's a good problem to have but it is a problem nonetheless.  Too much wood.

Um ... maybe it's just me but you could ... make stuff?  :o:P

  • Author

Um...yeah...that would be like trying to bail out the sinking Titanic with a coffee cup. LOL

I gotta get me one of those lumber yard jobs. Nice haul man. 

When I rretire next year, I thought about going to work at Rockler, just to stay out of my wife's hair. I will probably take my pay check home in a Rockler's bag each week.

Too much wood ? I know that struggle, i have high testosterone as well. Can sometimes be embarrassing. Sent from my SM-P550 using Tapatalk

Q, is red maple the species? I know silver maple often gets lumped into the soft maple basked. Not sure I've ever heard of red maple.

  • Author

If nothing else the WDB is dangerous to visit because it's likely you'll spend the better part of a day spiraling down the wormhole.  I've lost a good chunk of my life to that site by now.  Great resource.

Red maple is one of several soft maple species.  It is one of the two species that are considered to be superior to the others, along with big leaf maple.  Red maple is an eastern species and big leaf is western.  They both produce curly figure but only the big leaf will yield quilted (I'm pretty sure anyway...at least, I've never seen any quilted in any of our red maple...and I've seen a lot).  Red maple is the hardest of the soft maples, and at around 900 janka, it's just a bit softer than cherry and walnut.

Silver maple is trash.  It's like poplar only not as stable.  I'd avoid it for everything if at all possible.

What thickness is 4/4 generally at your store? The place here I prefer to buy from is 15/16" hit and miss which I like because it leaves room to flatten. Another place is 25/32" which doesn't leave crap for cleanup if you're shooting for 3/4". 

  • Author

Ours is 13/16".  I would rather have the skip planed 15/16" too but that's not what he has so too bad for me.  On the other hand, I can't remember the last time it was important I hit exactly 3/4" and I buy only fairly flat boards to begin with, so it hasn't been a problem more than once or twice.  Very often I find a 5/8" board is more aesthetically pleasing than a full 3/4" on smaller pieces of furniture.  3/4" is great for kitchen cabinets but I think people get too hung up on that number.  Who decided that's the magic number anyway?  Means nothing to me.  End rant.

I agree with Eric on thickness. If it gets below 5/8 I will replace that piece. Sometimes 8/4 goes from 1 3/4 to 1 1/2 pretty quick to get put any cup or twist.

All it really means is you have to go through all the part sizes and compensate. Yes it can be a lot of math but when you know all the part sizes forwards and back the project is mostly in your head by then and you can see how it needs to come together .

And does it really matter if a coffee table is 23 3/4" instead of 24" ?

Eric how dry is the stuff at your place. you saw that slab I could have brought home,But steve made the comment about it cracking or cupping so I am passing on it.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.