Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Shop upgrade insight

Featured Replies

10 minutes ago, JosephThomas said:

What exactly do you mean by this?  

Sounds like it wasn't wall buried or run through conduit. 

  • Author
5 minutes ago, Brendon_t said:

Sounds like it wasn't wall buried or run through conduit. 

This is what I'm referring to.

20 minutes ago, JosephThomas said:

What exactly do you mean by this?  

 

Back to the Pod. Even if it is lifted level on to the truck, you want to make sure things are well secured because they will shift during transport. My daughter had experience with that. Leaving it on site would be best.

It is common practice on metal buildings and pole barns, to erect the structure, then just pour the slab inside the building after it is up. The concrete normally is 4" unless you want greater. But for a normal wood shop and garage floor that should suffice. 

Heated concrete is a dream to stand on. The comfort level is amazing in the winter. 

It has been some years since I ran radiant floor heat under the slab, but one thing we did (I was with another contractor at the time) was install insulated foam board under the concrete with a reflective foil face. Many contractors don't do that and a good bit of the heat goes to warming the ground as well as the concrete. 

Adding the foam board acts not only as an insulator, but also to help reflect the heat up into the concrete. 

Good Luck selling and moving into your new shop! 

51 minutes ago, toddclippinger said:

Adding the foam board acts not only as an insulator, but also to help reflect the heat up into the concrete. 

+1. Radiant heat will be one of the more efficient and enjoyable choices you could make...there's an upfront cost, but worth it IMO....if it were me, I'd delay the purchase of a couple other little things in favor of this, can't easily add it later.

I vote make the entire building a woodshop! Build a shed for the mower and other crap. I would get some bids for concrete and make sure that company has done pole barns before. I wouldn't move dirt until one of them tells you to. A of times these buildings are put up factoring in 4" of concrete down the road. 

If you have 6" posts then you can do the R-19 rolls like John said and spray a lot of insulation in the attic - I ended up with R-44 IIRC. Insulation is cheap and will be your friend in winter and summer.

Congrats and enjoy the now shop!

  • Author
3 hours ago, estesbubba said:

I vote make the entire building a woodshop! Build a shed for the mower and other crap. I would get some bids for concrete and make sure that company has done pole barns before. I wouldn't move dirt until one of them tells you to. A of times these buildings are put up factoring in 4" of concrete down the road. 

If you have 6" posts then you can do the R-19 rolls like John said and spray a lot of insulation in the attic - I ended up with R-44 IIRC. Insulation is cheap and will be your friend in winter and summer.

Congrats and enjoy the now shop!

Haha, don't know what I'd do with all that room going from a shop with a little less than 400 sqft.  That may be an idea down the road when I have some more money to blow but I'm gonna have to buy a zero turn and those damn things are expensive.  But when the time comes hopefully, wouldn't mind sectioning off a part of it for a finishing room, that would be nice. 

For the guys talking about radiant heat for the floors, any idea how much that usually runs?  Could always lay the stuff and add the boiler or whatever is needed down the road, that was suggested before.

4 hours ago, estesbubba said:

I vote make the entire building a woodshop! Build a shed for the mower and other crap. I would get some bids for concrete and make sure that company has done pole barns before. I wouldn't move dirt until one of them tells you to. A of times these buildings are put up factoring in 4" of concrete down the road. 

If you have 6" posts then you can do the R-19 rolls like John said and spray a lot of insulation in the attic - I ended up with R-44 IIRC. Insulation is cheap and will be your friend in winter and summer.

Congrats and enjoy the now shop!

Mike beat me to it. Once that lawn mower and crap finds it's way into this building, it'll be there till the cows come home. Grab the opportunity, and keep all the sq. ft. for the shop. You'll never regret it.

9 hours ago, Gixxerjoe04 said:

For the guys talking about radiant heat for the floors, any idea how much that usually runs?  Could always lay the stuff and add the boiler or whatever is needed down the road, that was suggested before.

If you heat it like a house, the pipe alone is 350-500 for 250 sq ft depending on how you stake it. The best part of contractor consultation is that he/she can talk you through if you really want it everywhere with coverage like a living space. Many shops feel too warm at house heat levels, especially if it is generated at your feet. Just thoughts...I am far from an expert. 

  • Author

Hmmm, might just insulate the crap out of it and get a wood stove, I dunno, still have over a month until I really have to get the ball rolling.  I did call today and get a inspection set up for the house, also asked the guy about my wiring situation at my house currently.  He said as long as I tell the person who inspects my house about it being removed before we move out I should be fine. 

On March 14, 2016 at 11:32 AM, Brendon_t said:

I guess I'm looking at it from a geographic perspective.  In California,  a surface mounted curcuit would be the equivalent of a foundation crack because very few people out here could even run a new line if their wanted to.  They call a handyman to hang a closet door,paint a room, or change hvac filters . A bunch of girly men out here.

Well Brendon I would agree with you with one exception.  Years ago my wife and I decide we worked to hard for our dough to be a girly guy and give it to someone else.  :blink:  That is how I started acquiring my shop tools and the beat goes on.   To this day the only thing that has been done to this house by someone other then me is the installation on the carpet.  That includes a roof and repipe.  Its been fun and I think I get to keep my man card.

32 minutes ago, Chet K. said:

Well Brendon I would agree with you with one exception.  Years ago my wife and I decide we worked to hard for our dough to be a girly guy and give it to someone else.  :blink:  That is how I started acquiring my shop tools and the beat goes on.   To this day the only thing that has been done to this house by someone other then me is the installation on the carpet.  That includes a roof and repipe.  Its been fun and I think I get to keep my man card.

We're in the same game.  I started by buying a house in could just barely afford at the time and having to do everything myself.  Luckily I had some good friends with skills I didn't have that were willing to teach for beer. 

I grew up in a family that when something broke you got the tool box out. Learned from my dad, grandad, and uncles. Built my own bedroom in the basement at 15 because they wouldn't let me put a waterbed upstairs. Share the knowledge ! Teach your kids, friends , neighbors .

My dad tried to do everything himself and what he couldn't do he tried anyway. I adopted the same mentality, the only reason i feel i ever got better is because of my dad and  the great resources on the internet, like this site and everyone that is here.  So thanks to those that put in their time helping other people. Nothing feels better than when you finish a big house project and it cost you practically nothing (comparatively) and looks awesome.

  • Author

I try to do as much as i can, youtube is quite the helpful source that's for sure.  I changed out my garage door opener and track yesterday, was kind of nervous but it's working good now(knock on wood) haha

  • 2 weeks later...
  • Author

So I went to the potentially new house today to meet with the inspector.  Said the roof on the house isn't in the best of shape for being 11 years old, would probably need to be replaced in 3-5 years.  He normally doesn't check out buildings but turns out he's a woodworker too so he decided to take a look but can't put it in the report.  The trusses were put in every 10 feet when they should have been every 5 feet.  I had noticed a sag in the roof which is why I asked him to take a look.   Sooooo yea, some expensive stuff I'd say.

3A995C5E-002B-4527-83D5-8A6F10BA9BC9_zps

1B317BFC-434F-45C3-BCF3-CEB7FC27F00D_zps

7DAF8485-7CD1-43A6-B595-EE5C046334D3_zps

2 minutes ago, Gixxerjoe04 said:

So I went to the potentially new house today to meet with the inspector.  Said the roof on the house isn't in the best of shape for being 11 years old, would probably need to be replaced in 3-5 years.  He normally doesn't check out buildings but turns out he's a woodworker too so he decided to take a look but can't put it in the report.  The trusses were put in every 10 feet when they should have been every 5 feet.  I had noticed a sag in the roof which is why I asked him to take a look.   Sooooo yea, some expensive stuff I'd say.

Yikes! So there must not be much snow in that area of Kentucky? If it was getting that heavy wet snow Ohio gets I would have imagined the roof would have caved by now. 

  • Author

The inspector said he's surprised it didn't fall in over the past couple years bc we had a handful of times of getting 12-16" of pretty heavy snow. 

Here in southern Indiana, right next to river southern, the normal is 8 foot center. You ask for 4 foot and get a dirty look, but they will. Ask for 2 foot and you might get shot. 

  • Author
2 hours ago, Southwood said:

Here in southern Indiana, right next to river southern, the normal is 8 foot center. You ask for 4 foot and get a dirty look, but they will. Ask for 2 foot and you might get shot. 

I think the problem is him using what I assume are not the right trusses to carry that load over a 10 foot span.  Anyone have suggestions on how it would be fixed?  Kind of bummed about having to deal with that crap if we do end up buying it along with the floor and insulating it.

32 minutes ago, Gixxerjoe04 said:

I think the problem is him using what I assume are not the right trusses to carry that load over a 10 foot span.  Anyone have suggestions on how it would be fixed?  Kind of bummed about having to deal with that crap if we do end up buying it along with the floor and insulating it.

The problem is every span between "bents." If they should be closer, then you have to shore up every thing that runs between those trusses and posts. This is likely too much weight for the posts and trusses that are there so it is just a scab fix. How big can this building be that it is not worth (by cost) doubling up the trusses and boring some more posts in the ground? If it is standing now, tackle one web each weekend. Maybe they priced the home with the outbuilding as an enticement? This might give you some leverage. Find someone to give you a signature on an inspection. 

If you added additional posts and rafters of trusses sized so the bents rest on the rafters, it doesn't look like it would too difficult or expensive. Love the loft.....:o

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.