Popular Post Janello Posted June 22, 2016 Popular Post Report Posted June 22, 2016 Some of you might remember while I was building the Heitzman table, I had a guest in my shop. My buddy Wayne that never did and woodworking before had bought over some air dried cherry slabs from a tree thet fell in his yard during sandy. We collaborated on a design of his liking and I showed him around the shop. He had a hand in every operation through the process, basically doing most of the work under my direction. Here is the fruit of his labor. PS- He's finishing knobs he found, staining them black. I will likely post one final shot with it in place at his house. 12 Quote
Chestnut Posted June 22, 2016 Report Posted June 22, 2016 That looks great! Seems like the best way to use a tree that fell in your yard. I really like that cherry. Makes me excited seeing cherry projects i have one of my own coming up that I'm excited to start. 1 Quote
Janello Posted June 22, 2016 Author Report Posted June 22, 2016 4 minutes ago, TIODS said: Pegged M&T joints? Yeah, because he didn't want a lower shelf or stretcher, we opted for draw bore M&T. That combined with the poplar drawer frame kept it strong and eliminated any chance of racking. The poplar drawer frames were all dominoed, even into the aprons. 1 Quote
treeslayer Posted June 22, 2016 Report Posted June 22, 2016 absolutely beautiful work john as usual, i think you had more hands on it than you're admitting, especially with a guy who is not a woodworker, you must be an excellent mentor with lots of patience. are those legs solid cherry? love the attention to detail thru out the piece, nicely done! 2 Quote
Janello Posted June 22, 2016 Author Report Posted June 22, 2016 Thanks Dave. Yes, the legs are solid cherry. BTW: The edge profile for the top was done with a hand plane and ROS. The center drawer rail was shamelessly stolen from shaneymack's tool box technique and worked like a charm! So shout out to Shane for that! 1 Quote
gee-dub Posted June 22, 2016 Report Posted June 22, 2016 Muy Bueno! That beauty will make a great center piece and comes with a story to boot. The part showing through the breadboard edge is a wedged through-tenon, yes? 1 Quote
Janello Posted June 22, 2016 Author Report Posted June 22, 2016 7 minutes ago, gee-dub said: Muy Bueno! That beauty will make a great center piece and comes with a story to boot. The part showing through the breadboard edge is a wedged through-tenon, yes? Thanks! I'll be sure to pass along all of these compliments to Wayne. Yes, I showed him the steps, but really he grasped everything amazingly well. Yes, the through wedged tenon for the BB was easy to talk him into. Here's Wayne working on it. Quote
davewyo Posted June 22, 2016 Report Posted June 22, 2016 Beautiful piece John. You must be a good teacher. 1 Quote
shaneymack Posted June 22, 2016 Report Posted June 22, 2016 Looks great John! Way to lead a new guy into the craft ! Sent from my SM-N910W8 using Tapatalk 1 Quote
Llama Posted June 22, 2016 Report Posted June 22, 2016 This is really awesome! * I know better, but I must mess with the grammar nazis here 1 Quote
Eric. Posted June 22, 2016 Report Posted June 22, 2016 Tell Wayne he did a damn fine job for a rookie...or a salty old veteran at that. Love the exposed joinery on the breadboards. I probably would have done inset drawers but that's about the only complaint I have. I dig the detail on the legs...simple but definitely adds something. And the cherry is as warm and beautiful as it can be. Two thumbs up. 1 Quote
Janello Posted June 22, 2016 Author Report Posted June 22, 2016 44 minutes ago, Eric. said: I probably would have done inset drawers but that's about the only complaint I have Totally, agree. The original plan was to do inset drawers. We cut the openings with a track saw and they ultimately turned out a tad bit too wonky for an inset, so we dropped back and punted. Hindsight, we should have made a template for a flush trim router bit. 26 minutes ago, Mike. said: Looks great John. Is that black cherry or the regular kind? Wayne text his wife thinking it was his brother inlaw who has more cherry. He text her, "send me a picture of your cherry." I don't think she is black. Quote
Woodenskye Posted June 22, 2016 Report Posted June 22, 2016 Very nice coffee table! John you obviously did a great job teaching Wayne the necessary steps. 1 Quote
wtnhighlander Posted June 22, 2016 Report Posted June 22, 2016 Very nice, John! Wish I had a mentor like you when I was getting started! 2 Quote
mat60 Posted June 22, 2016 Report Posted June 22, 2016 Id be proud of that John..Love your work. 1 Quote
RichardA Posted June 22, 2016 Report Posted June 22, 2016 Damn, son, one hell of a job, you can come show me a few tricks anytime! 1 Quote
Janello Posted June 22, 2016 Author Report Posted June 22, 2016 50 minutes ago, RichardA said: Damn, son, one hell of a job, you can come show me a few tricks anytime! Very Kind. Most of my tricks were learned right here amongst this group! Seriously. Quote
RichardA Posted June 22, 2016 Report Posted June 22, 2016 26 minutes ago, Janello said: Very Kind. Most of my tricks were learned right here amongst this group! Seriously. I know, these are a hell of a good bunch, we're lucky to have this resource! 2 Quote
Chet Posted June 23, 2016 Report Posted June 23, 2016 Wayne did some nice work and you did a great job of tutoring. I am curious is wayne hooked enough to be talking about his own shop? Quote
Janello Posted June 23, 2016 Author Report Posted June 23, 2016 22 minutes ago, Chet K. said: Wayne did some nice work and you did a great job of tutoring. I am curious is wayne hooked enough to be talking about his own shop? Thanks Chet. No, atleast not yet. He has a few other hobbies and a young son into ice hockey so that keeps him busy. He's gonna take a break from the shop, but knows he's welcome back and is looking forward to another project down the road. Quote
Chestnut Posted June 23, 2016 Report Posted June 23, 2016 10 hours ago, Janello said: a young son into ice hockey so that keeps him busy. Well his money is gone for good if that keeps up. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.