drzaius Posted October 4, 2016 Report Posted October 4, 2016 1 minute ago, Mike. said: @Cliff, maybe you are using your discs too long? I go through 10 discs in no time at all. The minute it starts to degrade, I toss it and get a new one. YMMV I don't use Festool discs, or Festool anything for that matter, but I doubt I get much more than 15 min out of a coarse disc, lots less for the finer grits. That's with Klingspor discs, which are pretty good. Quote
gee-dub Posted October 4, 2016 Report Posted October 4, 2016 Special Edition, Collectible, One Time Super Cool Blue Systainer!!!! Be still my heart . . . Quote
Popular Post Tom Cancelleri Posted October 4, 2016 Popular Post Report Posted October 4, 2016 I have two new boxes of festool 125 paper and no 125 sander. I might snag it just for grins and giggles. Besides, I hear having more systainers increases my woodworking cred. 3 Quote
Cochese Posted October 4, 2016 Report Posted October 4, 2016 I much prefer the ergonomics of my 150/3, but the DTS is much lighter and easier to use one-handed if you are sanding at elevation. I'd have to imagine the 125 has similar qualities. If not, I sell it for a bit more than I paid for it in a few months. Not much downside to me. Quote
Cliff Posted October 4, 2016 Report Posted October 4, 2016 26 minutes ago, Mike. said: People say a 5" is better for face frames. I don't know. I don't build framed cabinets but I have no problem balancing the 6" on narrow stock. I am with Eric. There are two things that made woodworking way more fun for me: 1) Getting a good jointer 2) Switching to 6" sanders. If I didn't have a Ro90 for smaller tasks (which I hardly ever use), I might consider it. The RO90 is probably my one festool regret. I almost never need a 2.5" sander. @Cliff, maybe you are using your discs too long? I go through 10 discs in no time at all. The minute it starts to degrade, I toss it and get a new one. YMMV I don't do a lot of projects. But I noticed the discs last about 5x longer than the Mirka ones for my old dewalt. I check them often and can tell when it's time to replac, I think. I went from using 5-10 of each grit per project to one of each grit every 1-2 projects. Quote
Brendon_t Posted October 4, 2016 Report Posted October 4, 2016 1 minute ago, Cliff said: I don't do a lot of projects. But I noticed the discs last about 5x longer than the Mirka ones for my old dewalt. I check them often and can tell when it's time to replac, I think. I went from using 5-10 of each grit per project to one of each grit every 1-2 projects. That's weird, mirka paper seems to outlast my desire to keep sanding. Dust collection is also huge for wearing out paper quickly. 1 Quote
Eric. Posted October 4, 2016 Report Posted October 4, 2016 3 hours ago, Tom Cancelleri said: I have two new boxes of festool 125 paper and no 125 sander. I might snag it just for grins and giggles. Besides, I hear having more systainers increases my woodworking cred. Someone needs to do a study...I have a theory that the number of Systainers you own is exactly the proportional inverse of the number of projects you complete. Just an observation. Quote
mds2 Posted October 4, 2016 Report Posted October 4, 2016 1 hour ago, Eric. said: Because you hardly ever need a Domzilla, but it almost always makes sense to use a bigger sander. Name a time when a 5" sander would be better. I can't think of one. Neither can get into corners. One is just much faster than the other. We get it, you dont like 5" sanders. To stay on topic: how does this compare to other 5" ROS sanders? Currently using a Dewalt which I really like. Is this worth the money to upgrade? I would say I get 99.999% dust collection with my Dewalt sander. Quote
ben_r_ Posted October 4, 2016 Report Posted October 4, 2016 Hmmm.... I wonder if one can combine multiple $50 vouchers if they had them towards a single tool purchase... Quote
Eric. Posted October 4, 2016 Report Posted October 4, 2016 Just now, mds2 said: We get it, you dont like 5" sanders. To stay on topic I thought 5" sanders was the topic? I was asked a question and I answered it. Sorry for that. Quote
JosephThomas Posted October 4, 2016 Report Posted October 4, 2016 Because you hardly ever need a Domzilla, but it almost always makes sense to use a bigger sander. Name a time when a 5" sander would be better. I can't think of one. Neither can get into corners. One is just much faster than the other. Any time I'm working on a board that is thinner than say 5 inches or so, I prefer the smaller size, because it is less likely to tip and is just less weight to move around. Sent from my Nexus 5 using Tapatalk Quote
Chestnut Posted October 4, 2016 Report Posted October 4, 2016 2 minutes ago, mds2 said: We get it, you dont like 5" sanders. To stay on topic: how does this compare to other 5" ROS sanders? Currently using a Dewalt which I really like. Is this worth the money to upgrade? I would say I get 99.999% dust collection with my Dewalt sander. I have one of the new model dewalts and had an ETS 125 EQ. This sander makes me uncomfortable it's cheaper then the one i had and didn't like and it is unreleased so it has no reviews. Quote
Eric. Posted October 4, 2016 Report Posted October 4, 2016 Just now, JosephThomas said: Any time I'm working on a board that is thinner than say 5 inches or so, I prefer the smaller size, because it is less likely to tip and is just less weight to move around. Well whatever works for ya man. I have no issue with tippiness or weight, but to each his own. But now you gotta stock both 5" and 6" paper. Just doesn't pass the logic test for me. Quote
ben_r_ Posted October 4, 2016 Report Posted October 4, 2016 Just so you all know if you buy multiple sanders and get multiple $50 vouchers, you can not combine them for use one a single toold purchase. Shucks. Quote
Gixxerjoe04 Posted October 4, 2016 Report Posted October 4, 2016 So the price will be $195 after the promotion is over? With the prices put on used ones, might as well buy a few and sell them for $150 when the price goes up haha. Even though it's a 5" sander, still probably better than what I have, and it's not $380/480 for the other sanders I want. Quote
ben_r_ Posted October 4, 2016 Report Posted October 4, 2016 Yep, Im buying a few. Anyone found out how long this "limited run" will be going? Quote
JosephThomas Posted October 4, 2016 Report Posted October 4, 2016 1 hour ago, Eric. said: Well whatever works for ya man. I have no issue with tippiness or weight, but to each his own. But now you gotta stock both 5" and 6" paper. Just doesn't pass the logic test for me. True, the paper thing is a potential issue. My 6" is also a bosch (which I really like), so it's not apples to apples. I only brought it up bc we had that recent convo about me getting the domzilla and using the seneca adapters for smaller stuff, and the prevailing argument was "it's too big, hard to handle, etc" from what I recall, so I'm just comparing in my head. Perhaps the fact that the 6" sander bothers me means I shouldn't get the domzilla. Perhaps your lack of worry over using the 6" on everything means the domzilla wouldn't bother you...I dunno. Just thinking out loud. It's a forum, after all. Thx for the reply. Quote
Mark J Posted October 4, 2016 Report Posted October 4, 2016 If price were no object I would probably go with a 6 inch sander, too, but as money does matter, and since I presently have no sander at all, this is an interesting opportunity. Festool site says this is available November 1, and my Festool dealer didn't know about it, but is checking into it. So I'm thinking this is an introductory/pre-sale offer. Festool isn't making any statement about a voucher, though, so what's with that? This vender only? Festool is pretty touchy about those kinds of thing so I'd want to make sure I can count on the voucher. Quote
Rex Edgar Posted October 4, 2016 Report Posted October 4, 2016 4 hours ago, Eric. said: Because it's a 5" sander. Two thumbs down with a fart noise added. Eric, Do you like anything? 2 Quote
Mark J Posted October 4, 2016 Report Posted October 4, 2016 Follow up: I called the phone number on the retailer's web page. Nice guy answered. Confirmed the voucher, but couldn't say how long the offer would last, guessed about a month. Not sure that's much help, but I will wait a couple of days to see if my local bricks and mortar places have info. Quote
shaneymack Posted October 4, 2016 Report Posted October 4, 2016 Someone needs to do a study...I have a theory that the number of Systainers you own is exactly the proportional inverse of the number of projects you complete. Just an observation. Not for me. Sent from my SM-N910W8 using Tapatalk Im buying like ten of these, tossing the silly sander and collecting the cool limited blue systainer ! Sent from my SM-N910W8 using Tapatalk Quote
Rex Edgar Posted October 4, 2016 Report Posted October 4, 2016 5 minutes ago, shaneymack said: Not for me. Sent from my SM-N910W8 using Tapatalk Im buying like ten of these, tossing the silly sander and collecting the cool limited blue systainer ! Sent from my SM-N910W8 using Tapatalk Wondered where the 'systainer king' was hiding! 1 Quote
shaneymack Posted October 4, 2016 Report Posted October 4, 2016 Wondered where the 'systainer king' was hiding! Haha! Was at the festool roadshow today ! Brought a contractor buddy and now he's drinking the koolaid ! Sent from my SM-N910W8 using Tapatalk 1 Quote
Eric. Posted October 4, 2016 Report Posted October 4, 2016 20 minutes ago, Rex Edgar said: Eric, Do you like anything? Yeah, my Powermatic PJ-882HH is a bad mofo. No problems with it. Yet. Also my Grizzly table saw has performed amazingly well all the years I've owned it. G0690 My lathe is great (also Powermatic) but it doesn't get much use. Festool OF1400 and Domino 500, I love both. Every Lie Nielsen and most of my Veritas tools. My Auriou rasps and my Matsumura Japanese chisels. My Blue Spruce marking knives, and my few Glen Drake toys. I like my workbench. I built that. I like most of the furniture I've built. A few duds here and there. I like my family and friends. I've been enjoying my bikes lately. I like working in my yard. I'm going backpacking in a couple weeks...I'm gonna like that. Also having a party at my house next weekend and I'm sure I'll like that. Shall I go on? Why is it people try to label you as negative or a pessimist or whatever, when you point out the reality of a situation? I've been hearing that crap my entire life. Doesn't bother me. People can go on living their lives with the wool pulled over their eyes...see if I care. I'm definitely a cynic, but I am not a pessimist. I look at things objectively. Sometimes it's good, sometimes it's bad...but either way I'm not gonna lie to myself or anyone else. 1 Quote
shaneymack Posted October 4, 2016 Report Posted October 4, 2016 Yeah, my Powermatic PJ-882HH is a bad mofo. No problems with it. Yet. Also my Grizzly table saw has performed amazingly well all the years I've owned it. G0690 My lathe is great (also Powermatic) but it doesn't get much use. Festool OF1400 and Domino 500, I love both. Every Lie Nielsen and most of my Veritas tools. My Auriou rasps and my Matsumura Japanese chisels. My Blue Spruce marking knives, and my few Glen Drake toys. I like my workbench. I built that. I like most of the furniture I've built. A few duds here and there. I like my family and friends. I've been enjoying my bikes lately. I like working in my yard. I'm going backpacking in a couple weeks...I'm gonna like that. Also having a party at my house next weekend and I'm sure I'll like that. Shall I go on? Why is it people try to label you as negative or a pessimist or whatever, when you point out the reality of a situation? I've been hearing that crap my entire life. Doesn't bother me. People can go on living their lives with the wool pulled over their eyes...see if I care. I'm definitely a cynic, but I am not a pessimist. I look at things objectively. Sometimes it's good, sometimes it's bad...but either way I'm not gonna lie to myself or anyone else. Not liking something is one thing. Trying incessantly to convince everyone else is annoying. Sent from my SM-N910W8 using Tapatalk 2 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.