Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

In the market for a ROS

Featured Replies

  • Popular Post

 

My little Craftsman "professional" ROS, which was the first power tool I bought for myself back in 2009, has finally bit the dust. It still runs just fine, but the pad is full of tears. I've repaired it a few times with the adhesive Velcro replacement pad, but the tears just telegraph through to the Velcro and then the paper. I tried to find a replacement pad, but, of course, Craftsman has proprietary, nonstandard sanding pads. Behold, the last stand:

 

49a6599d4fcb172442b37a6a787abff4.jpg

 

 

DOCTOR: I'm sorry, son. There was nothing we could do. We couldn't get a pad donor of the correct type. We tried a DeWalt pad, but the old sander rejected it.

 

 

ME: *shades eyes with hand and heaves a dry sob*

 

 

 

-ahem.

 

 

So aside from Festool, which is tragically far out of my price range at the moment, does anyone have a good 5" ROS recommendation, 8-hole with a 1.25" dust collection port?

 

  • Replies 50
  • Views 9.7k
  • Created
  • Last Reply

Top Posters In This Topic

Most Popular Posts

  • Or worse, you'll be banned for using the HF word

  • My little Craftsman "professional" ROS, which was the first power tool I bought for myself back in 2009, has finally bit the dust. It still runs just fine, but the pad is full of tears. I've repaire

  • wtnhighlander
    wtnhighlander

    Ken, I use a shop vac attatched to the notorious HF sander I mentioned earlier, and it works great. Doesn't seem to pull the sander against the work, like so many people say, but gets the dust, no pro

Posted Images

 

 

 

 

 

 

 

 

 

 

 

 

So aside from Festool, which is tragically far out of my price range at the moment, does anyone have a good 5" ROS recommendation?

 

I love my Bosch sander. I'd recommend it in a heartbeat if you're not wanting to go up to Festool money. I think mine is the 3725 dvs or something like that, but I know there are others that have come out since. With a vacuum adapter on it I also get very little dust escaping.

 

 

 

Honestly I love my Ridgid ROS. Simple design. Multiple speeds. Built in dust collection bag or hook it up to a vac. You can get it at Home Depot for about 60 bucks. It's also made locally so that's a plus for me.

 

Sent from my SM-G930V using Tapatalk

 

 

  • Popular Post

Or worse, you'll be banned for using the HF word

I have been using a Bosch ROS20VSC for about 5 years now. Works great. I hook it up to my Festool ct vac. 

Soon I will be upgrading to a 6" model but this sander has served me well....and the price is right! 

The bosch 5" found at the home stores is great. Used it for a few years with no complaints until upgrading to festool.

 

And ill second immortans post about the dewalt. That thing is horrible. However home depot has a newer model dewalt ive never tried.

 

Sent from my SAMSUNG-SM-G890A using Tapatalk

 

 

20 minutes ago, Immortan D said:

I have a Dewalt and I wouldn't buy it again, reasons being vibration and noise.

And I pay extra for those

If the Bosch 5" is as good as the 6", there ya go.  I have the 6" and it's pretty fantastic.  Their paper is even very good.

4 minutes ago, K Cooper said:

And I pay extra for those

Do you like yours? I mean mine works, but I tried a Bosch and it's far superior (at twice the price)

Edit LOL I gotcha.

Sorry about the misguided humor. I meant that I pay extra for vibration and noise:wacko: Bad

I may get beat up by why not the Craftsman again if you liked it. I got one and actually really like it. Even that gimmicky bag thing they put on it somewhat works if your not using a vaccume. Don't know if mine is the same as yours and who can tell with how cman does things. The two tools I always look at is cman and then when they are junk makita. I didn't like the makita and the cman felt right so it's in my shop. It's a fairly new tool for me after using a palm sander for to long so we will see how long it lasts.

  • Author
I may get beat up by why not the Craftsman again if you liked it. I got one and actually really like it. Even that gimmicky bag thing they put on it somewhat works if your not using a vaccume. Don't know if mine is the same as yours and who can tell with how cman does things. The two tools I always look at is cman and then when they are junk makita. I didn't like the makita and the cman felt right so it's in my shop. It's a fairly new tool for me after using a palm sander for to long so we will see how long it lasts.

Hey, if you like it more power to you! Mine was decent, but I'm ready for something a little more standard, I guess. It really annoys me that I can't just pop around the corner to the blue box and get a replacement pad for my Craftsman, so I'm leaning toward Bosch at the moment.

I got a Bosch ROS65VC several months ago & it's a huge improvement over any 5" sander I've used. Very, very smooth, powerful & even without a vacuum has good dust collection.

I hardly ever use my 5" Dewalt anymore, even though I've got boxes of discs for it.

Never used a Festool though, so I can't compare to them.

I have a couple of the no longer offered Bosch 1295 DVS.  Just to speak to quality, I have been running them for 10 years without issue.  although I don't use them much, they always perform when called upon.  the dust collection with a vac attached picks up more than the sander generates.  I can actually see particles from nearby getting sucked into the sander as it passes.

Bosch-w-hose.jpg.6fa13d61bd8552c8295a874bf5210228.jpg

I have different density pads for them although the hard pad stays on more often than not.

10 hours ago, Immortan D said:

I have a Dewalt and I wouldn't buy it again, reasons being vibration and noise.

Which model?

They had come out with a low profile sander a few years back that got good reviews, and I always told myself I wanted to pick one up - but never did.  They're discontinued now, I believe.

I run a 5" Milwaukee (model 6021) that has worked well for me for many years.  It has good dust collection when used with a shop vac, variable speed, and no louder than I'd expect (are there any really quiet ones?).  I am considering trying other models, especially a festool, to try to see where it lands on the vibration scale.  Some days I sand for hours with no issues, but other days I can really feel it in my hand.  

Okay, gonna take some heat here for this one...

But go Green.....

Or yellow, not really sure what shade it is.

My Ryobi One+ is a (IMO) really nice little sander.  It is not pro quality, but I don't have any complaints.   It's cordless too, which could be a plus or a minus, but with the large batteries, they recharge faster than the sander kills them, so 2 will keep you running constantly.   And they have a decent selection of other tools that use the same batteries.

Hooks up to my DC Hose no problem.  I never have any dust get out when it's hooked up.  Some fine powder does escape when used with just the collection bag. 

5" 8 Hole.  (Which is better than a 8" 5 Hole if you're a hockey fan). 

 

Let the beatings begin. 

Recently my low profile DeWalt 5"  died and I needed to replace it.  I never was very happy with that sander anyways as I didn't like how it fit in my hand.  I bought this Makita,  https://www.amazon.com/Makita-BO5041-4000-12000-D-Handle-Random/dp/B0076I69H2/ref=sr_1_1?ie=UTF8&qid=1493389398&sr=8-1&keywords=Makita+BO5041 , and have been extremely happy with it.  The trigger control with lock-on capability is one of the features I like best. 

I've got an old Porter Cable 333 sander that I've been using for years.  I have replaced the pad a couple of times but otherwise it's been fine.  I hope to be able to afford a Mirka Ceros when the time comes to replace it.

I bought the Bosch ROS65VCL a couple years ago when it came with a 5" and 6" pad and an LBox systainer and really like it. It has good dust collection and has never left my hands ringing.

Whatever you go with, I strongly recommend you upgrade to a 6".  A lot of people (who don't remember geometry) just think "oh it's only an extra inch", but it's an extra 44% of surface area, which makes a HUGE difference in sanding time.  You'll notice it right away.

I had a Bosch 6" before I upgraded to festool, and I still use it for DIY stuff.  It's a great sander...although I think it was kind of pricey too (it was basically their version of the rotex).

Anyway...ryobi, dewalt, festool, bosch, harbor freight, craftsman...whatever you get, get a 6".

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.