Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

The Wood Whisperer Guild

Building a Wood Whisperer Guild project? Ask questions about the plans, share your progress, and see how other members approached the same build.

  1. Started by mlingenfelter,

    This will be my thread to track how the finish I chose holds up over time. I chose to use Penofin, which is a penetrating oil finish. They have many different types, and I used their Hardwood Formula. My chairs are made of White Oak. This oil does have a slight tone to it. It gave the wood a nice golden color that we ended up really liking. I applied a heavy coat of finish and let is soak in, for about 10 minutes. I then wiped off the excess and let it dry. Just one coat, as the instructions said. I plan to reapply the oil each year. I also live near Seattle Wa, so we do get some rain and snow here. I do plan to leave my chairs out year round, but I did pick up…

  2. Started by rihacker,

    Finished my chair thought I would share. I just need to add the under arm detail. one thought thought, i book matched the back and it really added a whole new flavor.

    • 18 replies
    • 6.8k views
  3. Started by AMarshall,

    Hi guys. I am hoping to get some opinions on an alternate design for the current Guild Build, the Greene & Greene Adirondack Chair. I've got "analysis paralysis" and can't decide which way to go. I'm playing around with the curves on the side leg. For reference, here is a picture of the plan as published. We can't really change the top curve without messing up the seat, but I was looking at that gentle 1/4" curve on the bottom of the side leg. How about using the "cloudlift" template down there? Marc and I had discussed doing this during the design phase, but we thought it might be pushing the G&G elements a little too far. What do you guys think…

    • 28 replies
    • 11.7k views
  4. Started by rihacker,

    So for my chairs...yes my wife liked the first one so much I had to make a second. The first one has photos on the thread below. At marks suggestion I used Epifanes on the African mahogany of my chair. So at first I was um..ok but WOW over the past month I had it near a window the chair is oxidizing a bit under the coating and its taken a life onto its own. On the mahogany chair I applied the Epifanes to the bare wood. Diluted it as the directions said and sanded between coats. If you have a lot of chatoyance or deep colorful lines like the backs and arms have on mine its perfect. As it cures the Epifanes makes a glass like surface thats high gloss and fantastic (…

    • 3 replies
    • 4.9k views
  5. This might be an ignorant question, but would this project have been one where a planed surface would have been an alternative to sanding? Would there be any advantage to doing that way or does the inclusion of curves and roundovers in the design make the prospect of using planes for stock prep a nightmare? I have no experience with hand planes, so I have only a fairly fuzzy concept on where it can be used to great effect. Up till now, I just sand the heck out of everything. But I'm hoping this question might spark a discussion that I can learn from. Josh

    • 3 replies
    • 4.5k views
  6. Started by Southwood,

    For those of you that have built this table, what is the rough build time? The reason I ask, is that my wife seems to think they would make nice holiday gifts. So far she has 10 on her list. So, do you think these could be mass produced? I am thinking about maple top with everything below that painted. Well except for the drawer box itself. Might even pocket screw the aprons and legs. Looking for ideas if you have them. I am pretty sure that 10 will change before holiday season gets here.

    • 0 replies
    • 3.9k views
  7. Started by sawdusty,

    I liked the carving detail the Marc did and I decided to go for it since I've already have done the tapered inset. I also decided to do the mortise with hand tools since my router skills are a bit shaky. Thanks to excellent teaching from Marc and the Handtool School I was able to hit the target of last week's guild podcast. (first time no do overs required ). So I thought I'd just share a few photos.

    • 3 replies
    • 3.9k views
  8. Started by Renzo,

    So i've finally started the WHC. I had planned to build along in real time, but wasn't able to. I'm going with the Plywood version, mainly because i've not really used plywood for any "real" projects before. I'm using mahogany plywood, I had wanted to go walnut by my wood store was out and he gave me a great deal on the mahogany. This will be living in a bathroom which really doesn't get much use. We have a bathroom in our basement which has a shower but in the year we've lived here it's never been used, so i'm not concerned with mold and moisture. We don't have much room for hand towels or TP storage, so this will come in very handy.so I'm thinking of going with BLO…

    • 5 replies
    • 4.8k views
  9. Started by DeanJackson,

    Learning from failures is good for all of us, right? I'm using SPF - pine, probably - to build the Adirondack chair. Conifers work pretty well as outside woods, since the soft woods can expand/contract without splitting. Between a 6" bandsaw, 12" planer, and a tablesaw, I'm cutting down Home Depot plain old lumber last night to get the cut list together. My planer sits on the floor, as it's a small shop, and I need to be able to store it. I swing around the 2x12" piece - the big one - and misjudge it right into the side of my kneecap. I stand up really quickly - basement shop - and put my head directly into a lightbulb, which shatters down over me. I'm standi…

    • 5 replies
    • 4.1k views
  10. Started by DeanJackson,

    Wouldn't mind making this out of white oak or cedar, but would prefer to source it more locally than Oregon. Is there a cut list available, other than having ~30 bf of wood? :-)

    • 15 replies
    • 7k views
  11. Started by bois,

    Many of you might know that Lance Chase, a fellow guildie (and avid Adirondack chair builder) has spent the last few months building an Adirondack guide boat. I thought I'd share a link to a local news article on Lance's feat as inspiration for this guild build. While building this boat is quite a feat in itself, what really added to the challenge is that Lance is legally blind. Check is out: Amsterdam Recorder , June 3rd

  12. Started by konkers,

    I'm all caught up on the adirondack chair build. Here are some picture of the rough layout. Template pictures to follow. Gory details can be found at http://www.bltww.com/2011/06/04/adirondack-chair-week-1/

  13. Started by mlingenfelter,

    I was thinking about using Marc's and Aaron's chair design, but then I started to looking around at other designs. There were a couple designs by http://celeski.com/http://celeski.com/, that both my wife and I really liked. This design is influenced by one of Tim's chairs. I may still do some tweaking on the front legs. They seem a little bulbous at the top. I hope I can start on this project soon. I have to finish up a few other things, before I can start another project.

    • 8 replies
    • 4.7k views
  14. Started by mlingenfelter,

    I learned the hard way not to apply a finish to outdoor projects. I even used a marine finish, that were suppose hold up to the weather, but it didn't last a year. I think the mistake is going with a "film" finish. My wife really doesn't like the gray weathered look. So, I thought I would look into some penetrating oil finishes. I really like the outdoor furniture Tim Celeski makes. He talks about using a Brazilian Rosewood Oil finish on his outdoor furniture. He doesn't give a brand, but I did a Google search and found Penofin. They say they use Brazilian Rosewood Oil in their finishes. Has anyone used their products? Does their product help delay the graying o…

    • 13 replies
    • 8.5k views
  15. Started by armando,

    Hi guys, this is my first build of anything made of wood. Because I am married, i'm thinking of building two of these chairs, one for my wife and one for myself. Since i'm not sure how this will turn out I was thinking of being conservative and buy enough product for one chair and depending on how it turns out build another one(or not....haha). Then I thought, maybe it would be best to build both at the same time because of the obvious "time saving" aspect, but if this turns out bad then i'll be at a double loss. Then I thought, building two at different times might be a better choice because going through the process of re-setting up the tools/jigs etc. would build skill…

    • 4 replies
    • 3.6k views
  16. Started by konkers,

    Well... looks like I finished just in time for the Adirondack Chair build... and mother's day. This is a major milestone for me. I got into woodworking years ago with the intention of building furniture. It's been a slow process until the last 6 months ago when I dove in head first. Now here I am with my first completed piece of furniture. Is it perfectly square? No. Are the dovetails flawless? No. Is the finish super even? No. However, the post mortem can wait for another post. Right now... just look at it. It's a real, functional, fine piece of furniture. Being the first piece of this complexity, I kept pretty close to the design and build process …

  17. Started by jgfore,

    OK. After running into a BUTT LOAD of issues with this cabinet, I have finally reached the end. The only thing that I still lack is the inside latches for the doors and the French cleat to hang it. I actually bought the latches for the inside, but some how I have lost them in the shop, so I will buy two more (then get home and find the two that I lost). So, if the doors look like they are not quite flush with the front, it is because the doors are not completely shut. I apologize for the crappy pictures, but my cell phone is all that I had available tonight. After I hang it on the wall, I will get my good camera and take some nicer pictures. I welcome everyone’s commen…

    • 0 replies
    • 3.8k views
  18. Started by billboard,

    I made us a set of adirondack chairs and a table a few years ago. Over the winter I had in mind to make a double-seater adirondack seat to match what I have along with another table. I was so glad the next Guild Build was an Adirondack chair. I started a couple of weeks ago. I would love to do the Greene and Greene style, but I am using my original pattern. I am so glad I made templates on my first set. The design is a simple one free from the internet but we have received several years of enjoyment from them. My last set was made from southern yellow pine with a varnish finish but had become quite weathered so my wife painted them blue. This project will be painted …

    • 3 replies
    • 4.2k views
  19. Started by BuzzBusey,

    Hi folks, I am really looking forward to this as it is my first group build. Hey Marc, In your spare time ;-) , I was wondering if you already post, or could post some stats about the guild. How many members... where is everyone from , how many are participating in the builds, etc. Thanks for all your time and help! Buzz

    • 0 replies
    • 3.3k views
  20. Started by jgfore,

    Iam about ready to start finishing my wall hanging cabinet. I am using GeneralFinishes - Ebony Dye. After applying this to a sample piece, I have noticedthat the pores of the Red Oak show up like a NEON SIGN. This is due to the dye,not being able to get into the deep pores. Even after several coats, the dye isnot going to penetrate. So, I have heard that on woods such as Red Oak andMahogany, it is sometimes needed to use grain filler. I have never used fillerbefore, but I can see why people use it on Red Oak. Even after sanding the HECKout of this cabinet, I can still fill every pore on the wood. After thisproject, I will probably stay away from Red Oak in the future for …

    • 3 replies
    • 4.1k views
  21. Started by jgfore,

    When is the dead line for getting the Wall Hanging Cabnet photos in for the Festol Contest, or is it already past? I have not seen very many photos of the cabinet, and thought that there may still be time to get it finished. Thanks for your help.

    • 2 replies
    • 4.3k views
  22. Started by jgfore,

    Ok. With my daughters softball pratice and me stupid enough to agrre to coach, I am way behind on my build. I was way ahead of the curve and then everything happened. Anyway, it is time for me to assemble the case. I do not have epoxy and do not have the cash to buy any right now. So, my question is: Am I about to ROYALLY mess -up by using my TiteBond III to do the assembly? I know that the water based glue is going to make the joints swell making it a bit more difficult to seat all the joints, and the drying time is a HUGE concern. Especially since I am NOOO Professional. Woodworking is very relaxing to me, until the assembly, then I get very stressed out. I almost have …

    • 6 replies
    • 4.3k views
  23. Started by billboard,

    I was thinking of building the wall hanging cabinet per plan. We really didn't have place for it, even my shop walls are full (small shop). I recently had to remove a small upper and lower cabinet to make room for a new refrigerator that was wider than the space we had. My better half requested that I make a simple rack to hold the coffee cups in its place. She actually likes to sand and finish so we spent some quality time together in the shop. Several people commented on her from the live webcam about her dancing while she was sanding. Anyhoo the little shelf turned out great. Made from oak to match our cabinets. Originally it was to have a back but we decided t…

    • 2 replies
    • 4.1k views
  24. Started by gkmillheim,

    I started the Chest project in May 2010 and finished about a month ago (do the math, 8 months). The design is different than the Guild project but more useful for my home. I did learn how to hand cut dovetails since there are 96 of the little suckers. It's built out of cherry and poplar. Finished with shellac, varnish, and wax. It was a great skill building and enjoyable experience. Thanks Marc for the inspiration and all of your how-to videos.

    • 2 replies
    • 4.6k views
  25. Started by CKen,

    I am building a variation of the wall hanging cabinet. The changes where necessary due to space,and the influence of my wife. The changes I am planing on are to make the over all height about 6" taller, 6" deep, and the total width about 12"keep the drawr about the same. I am building two cabinets, one for each side of the mirror. I have never really designed anything before, and I am concerned about a couple of things. First is the size of rails and styles. Should I make them smaller? I am a little worried that they will look funny with the narrower cabinet. The plan calls for a fixed shelf, I am planning on adding another. Would it be better to have both…

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.