The Wood Whisperer Guild
Building a Wood Whisperer Guild project? Ask questions about the plans, share your progress, and see how other members approached the same build.
500 topics in this forum
-
I've been toying with an alternate design for the Wall Hanging Cabinet that has a G&G spin. I was watching an old live demo Marc did back in 2008 as part of the Gadget Station build - it dealt with the finger joints for the cabinet. This struck me as being a little simpler than the dovetails, and that thought started the slide toward other Greene & Greene elements. I will freely admit that I haven't done my homework on G&G designs. I shamelessly plundered Darrell Peart's site (www.furnituremaker.com) because I have a man crush on his designs, particularly the Aurora Desk. Here's what I came up with. I started with finger joints on the ca…
-
- 11 replies
- 8.5k views
-
-
OK, I'm building a Wall-Hanging Jewelry Cabinet, so my dimensions are a little smaller (approx 24" X 17 3/4"). I designed the doors to be 3/4" thick, but after milling the stock it seem a little beefy for the 1 1/2 & 2" rails and stiles. Since the doors will be 22 3/4" tall, does anyone see any concerns if I reduce the thickness to 1/2"; or maybe I should only have a single door with wider components and keep the 3/4" thickness. If you would like to provide some input, you can also reference the attached SketchUp file (be kind, this is only the 2nd design I have done in SketchUp...lol). Thanks, TexWood GG JB_02.skp
-
- 2 replies
- 4.1k views
-
-
Hi all. I am brand new to the Guild. I am planning on building the Primary Version of the Wall Hanging Cabinet. I chose Primary, as I've never done DoveTail joinery EVER -- either with a jig or hand cut, so I thought this would be a great time to dive in. 1. DT Jig Advice: I'm guessing I don't have time to perfect hand cut dovetails (I do have a day job); so, I am willing to invest in a Dove Tail Jig. So, I've started researching like I always do, and I am overwhelmed. I've narrowed down to the Porter Cable 4212, Leigh Super Jig, and AKEDA. The PC4212 is very reasonably priced. The other 2 are presumeably better -- and the price is commensurate -- the AKEDA is c…
-
-
- 14 replies
- 5.8k views
-
-
I bought a Porter Cable Dovetail jig for this project, (because I really want it to look nice and I have never done dovetails by hand before) but have found that it only does half blind dovetails, unless I purchase another plate. Since my wife will probably leave me or castrate me if another tool arrives on the door step, I really do not need to do this YET. So, my question is: If I do the half blind dovetails, and I want them to be visible, can I let the blind side be on the draw sides, and let the visible portion be seen as the front of the drawer. My next question is: WILL IT LOOK STUPID? If Marc ends up doing his by hand, and not use the jig, then I may attempt th…
-
- 13 replies
- 5k views
-
-
I'm really excited to be building along with the wall-hanging cabinet build. It is great to see that a number of people are building along with this project. My bathroom needed a new medicine cabinet as well as some additional storage space, so I'm going to be building two cabinets at once. This sounded like it could turn into more than I bargained for, so I incorporated a couple features into my plans to make my life easier: I eliminated the drawers, used sliding dovetails to connect everything together and am using common dimensions between both pieces to minimize the number of machine setups. My cabinets will be painted to match the color scheme in my bathroom, s…
-
- 3 replies
- 7k views
-
-
Moving right along, I started this thing weekend before last with the milling. I did hand cut dovetails. I had ordered a through dovetail template for my PC 4210 jig but it didn't come in until after I needed it, on the other hand I may do a couple more of these so it wil still come in handy. Last week I continued on with the dado's which I plunge cut on my 50 year old Dewalt RAS. Cleaned them up with chisels and a router plane. Marks jig on this weeks video is cool, I pretty much hate my router though . I also clamped up the unglued case and built the drawer to fit the opening. I did the bottom from solid wood and I'll do the same for the case back. This week the…
-
- 5 replies
- 5.3k views
-
-
I noticed mention of a new shop under construction. Was there ever consideration of doing a show on the construction of the shop or have i missed the discussion?
-
- 2 replies
- 4.3k views
-
-
So, who is planning on building along with the wall cabinet guild build? Marc's plan reminds me of my tool cabinet, which I built a number of years ago from a Woodsmith magazine plan. It is a good reminder that these cabinets can serve a lot of purposes besides holding your toilet paper stash. My plan is to build a pair of cabinets for the bathroom. Both will be based off the same basic concept, but will be adapted slightly for their specific uses. The first is going to be a medicine cabinet with a mirror on the front that is inset into the wall, so I'm going to have to make some modifications to add a face frame to cover the gap between the cabinet and the r…
-
- 26 replies
- 11k views
- 1 follower
-
-
I see from the Rockler site that there are two different kinds and a couple of different sizes [url=http://www.rockler.com/product.cfm?page=271&filter=knife%20hinges]. I've never done hinges before, so for this build, exactly what kind, what size and how many will I need?
-
- 8 replies
- 5.6k views
-
-
I'm trying to decide on where I should get my lumber from. On one hand, the Bell Forest kits are quite nice and handy, and from what I've heard do a pretty good job of getting you good lumber. On the other hand, the local lumber is (I assume) already at least part way acclimated to the climate here. I haven't priced it out yet, but I'm guessing that price-wise the local lumber may be a bit cheaper. So which are you gong to do?
-
- 8 replies
- 5.1k views
-
-
I'm building the Wall Cabinet (just getting started) and now sourcing the lumber. I have enough Cherry for the box/frame, but not the door panels. Wondering what might go well with cherry. Thoughts? I saw this ad on Craigslist for Black Walnut - not too far from me: http://sfbay.craigslist.org/sby/mat/2164094932.html. May go grab on of 'em... Cheers - Stu
-
- 5 replies
- 6.8k views
-
-
I will so a single door version to use up some reclaimed genuine mahogany I had as well as a full two door version from curly maple. Ready to Go.
-
- 10 replies
- 5.4k views
-
-
This is funny, I built this cabinet about a year ago on a request from my wife for our bathroom. I just thought it was funny how similar the two projects are, I'm going to have to join the guild I guess.
-
- 1 reply
- 4k views
-
-
Hey Guys, Looks like I finished my guild project unintentionally ahead of time.... I built mine out of an old Teak China cabinet that I saved from the scrap bin a few years ago. It was handed down from my Grandmother to my Mom, then to me.. but by the time it got to me.. it was too far gone.. made of mostly teak ply (5/8 Particle Core Ply) it just did not stand the test of time.. a few years ago, I made two night tables for my Mom out of it, and this year I took what was left and built a jewelry cabinet for her Christmas gift this year... I checked into the Guild site just after Christmas, and low and behold.. It looks almost identical to the wall hanging cabinet. …
-
- 3 replies
- 5.4k views
-
-
This is my first Guild Build and I really am looking forward to the Live Meeting this Wed. night. So, I do not want to miss the whole darn thing because I can not figure out how to get to the Live Feed area, or find out that I have to download some sort of special video streaming software. If Marc, or someone can just walk me through where I need to click, and what I need to download (if needed) prior to the meeting, I would feel much more prepaired. Thanks Jeff
-
- 2 replies
- 3.6k views
-
-
Since one of the versions of the wall hanging cabinet will feature knife hinges, you might check out this FWW article. Should help to get your head in the game: http://www.finewoodworking.com/item/33669/how-to-install-knife-hinges
-
- 1 reply
- 4k views
-
-
Hey everyone, I'm really looking forward to the guild build next week but I have a couple of questions. *More details on ordering the lumber as a package and how soon we need to. *Do I log in that night and watch it as a streaming video? *if I do log in how do I go about doing it please? I know this might sound like dumb questions, but I don't want to miss anything. I want to use it as a very nice wall cabinet for my tools in the shop. Cheers, Dave
-
- 8 replies
- 4.2k views
-
-
Hi, I'm having a bit of trouble downloading and opening version one of the plans. Has anyone else been able to do it? I am able to download version two and open it OK. Thanks, Andy
-
- 4 replies
- 3.4k views
-
-
Hello all fellow woodworkers. Well I have been finally able to get out into my shop. The heat and humidity has left us for now so I went back to work on the summer Guild Build. After milling some White Oak for the legs and cutting all the M & T's, AKA,PITAS, I was able to set the side panels into place and get both sides glued up. Today I was out there working on the back Styles and Rails. Man I'll tell you all something. Be prepared to do allot of dry fitting and cutting on this one. After five or so hours I finally got the back all dry fitted and to my surprise it all fit. Not bad for a guy with very little vision in both eyes. I have posted some pictures of the un…
-
- 44 replies
- 13.8k views
-
-
While watching the last guild build the drawer joints made me think of where I had seen these before. I couldn't really place it so I pulled a few books and was going to look through them. Before I got through all of them I went on vacation to Maine and Boston. While in Boston I got a chance to tour the USS Constitution built 1794 to 1797. I was walking between the decks when I looked down at the joinery around a hatch and discovered this. Low and behold it was the dovetailed rabbet joint that Marc used on his drawers. Granted it was in a more frame and panel type construction, but it was still there. I was floored having expected …
-
- 2 replies
- 6.1k views
-
-
After two months of building and filming, the chest of drawers is complete. Time for a vacation!
-
- 21 replies
- 8.7k views
-
-
Since I joined the guild I figured I would grab the plans from some previous builds that I thought I could do once I get going. Tried to get the plans from the shaker table and it tells me it's not there or something. Needless to say it won't let me get the plans. Are these something I need to buy or how does it work?
-
- 6 replies
- 6.6k views
-
-
I decided to play with some handle options for the chest of drawers today. Here's one what was "interesting" to make. Just a prototype right now and still considering my options.
-
- 22 replies
- 8.5k views
-
-
Hey Guildies. I am undecided on the finish for the chest of drawers, so I will let you guys decide. The choices are based on availability and what I have reasonable access to, as well as what I am personally willing to apply. Some pieces I like to experiment on, but this isn't one of them. Let me know what you think. Here are some links to each product to help you make a decision: Enduro-Var Arm-R-Seal Sherwin William Pre-Cat Lacquer
-
- 8 replies
- 6.1k views
-
-
Just thought you guys might like to see where the project is in real time. Obviously I need to be a little ahead of the videos. The sides are glued up as sub-assemblies and the divider supports are installed. I attached the back and front rails in a dry assembly and the next step is to create the web frames, notch the corners, and then the case can be glued up. Moving right along.
-
- 13 replies
- 6.4k views
-
Who's Online (See full list)
Forum Statistics
- Total Topics 32.1k
- Total Posts 437.6k
Member Statistics
- 26,011 Total Members
- 3,644 Most Online
-
bobtjanitor Newest Member ·