The Wood Whisperer Guild
Building a Wood Whisperer Guild project? Ask questions about the plans, share your progress, and see how other members approached the same build.
500 topics in this forum
-
I plan on incorporating the split top Roubo design, dog holes, tail and leg vises into a fairly massive rolling tool storage/workbench, mainly due to space restraints, and was wondering what people thought makes a Roubo a Roubo? Is there any specific design or functional elements that they consider necessary for a bench to be a Roubo?
-
- 7 replies
- 3.7k views
-
-
What are the recommeded wood species for the bench build? I have heard everything from hard maple to ash to SYP to fir. Right now I am leaning to ash just because of the low cost. Thoughts?
-
-
- 91 replies
- 31.7k views
-
-
I completed the Guild build on 12/20/2012. Here's my version of the bench. Thank you Marc for choosing this for the Guild build and Aaron Marshall for your amazing Sketch Up skills!!
-
- 15 replies
- 4.5k views
-
-
I have just started the build of the Roubo bench. I am finding my 3 knife Ridgid planar to be ok for milling each board but, when I ran the front slab through the planar it was a different ball game, the thing would still be cutting fine it just can't pull the slab through, and that was at any depth of cut. Every time I would stop pushing or pulling it would just stop moving, never had that problem with the single boards. I have had my eye on a Grizzly 15" with the spiral cutter for a while now, this may just put me over the edge!!!
-
-
- 9 replies
- 4.1k views
-
-
Yeah! For the first time I'm at the same stage as the videos are. I spend about 8 hours yesterday and 9 hours today in my (cold) shop. Yesterday I finished the base, and today just finished the leg vise. I hit only a minor problem, when I used too large of a drill bit to predrill for the tap holes. Oh well, that's what they made epoxy for What's next in the videos? How many do we have left? The base. Recycled Douglas fir like the top. Unfortunately I had almost no quarter sawn fir left, but it's a base. The leg vise is made from a piece of African Mahogany. The parallel guide is quarter sawn walnut that I had left over from making winding sticks. The roller …
-
- 2 replies
- 2.9k views
-
-
After months of building, I was able to enjoy the afternoon relaxing in my completed adirondack chair. I didn't deviate from the plans and I ended up using african mahogany lumber. The finish I choose was Penofin as I wanted an easily renewable finish.
-
- 3 replies
- 4.4k views
-
-
So I was wondering if anybody else is impressed everytime they see one of those big honkin' dogs that pop up through the bench tops in many of the pictures around the 'net? I realize the Split Top Strip replaces the need for this dog, but don't they look cool? I'm seriously considering including one just left of the leg vise a bit beyond the doghole strip. After all, I'll be showing this thing off to anyone that comes over for a year or so after completion, and they'll not realize that bad boy's for show only. OK, beat me up for being showy, but it's my bench and I'll dog it if I want to!!! Jim
-
- 13 replies
- 4.2k views
-
-
I finished all the mortises and tenons in the base, next would be the leg vise, but I want to use a special piece of wood for that, but I haven't found one yet. So, I went back to my front slab and finished the tail vise. I was procrastinating a bit with that part, because I had my end cap problems and while I believe I had fixed the problems, I wasn't 100% sure. Well, I shouldn't have been doubting myself - everything fit perfectly. The vise works great! Having that all done, I wanted to have a few bench dogs. I created the first one and then a "dog breeder" to crank out 11 more. After I was done and had all the springs attached, I looked at the plan again and realize…
-
- 4 replies
- 3.3k views
-
-
I have a few questions about the dog blocks. The plan calls for blocks that at 15/16 inch thick ant the way it looked from the video is that they were a very close fit. My dog holes are 1 inch thick. Should I make the blocks to the plan or make them wider for a slightly closer fit Also on the springs. I made them out of soft maple and notice that it takes a fair amount of pressure to move them. One one of the blocks I made the spring cracked a little from the screw And that one is a lot easier to move because the tension is a bit less. Do you think I should use a different wood like ash or possible make the spring thinner than 1/8 in Thanks
-
- 5 replies
- 3.4k views
-
-
I can't swing the full lumber purchase just yet but would like to get started on the top, well at least the front half. Roughly how many 8' 8/4 boards should I go with. I apologize for such a newb question but I'm not good at estimating lumber requirements yet.
-
- 2 replies
- 2.9k views
-
-
Wondering what everyone is using for the wagon vice guide. I am making the bench out of soft maple. I have a piece of ipe that's definitely hard and straight grained. I am not sure I like the look as its the only dark wood in the bench that has some paduak accents buts it's the only other wood I have besides a crap load of soft maple cut offs
-
- 7 replies
- 3.5k views
-
-
I am ready to drill the holes in the rail tenons. Whats the proper offset. I can't get to the guild site with this crazy DDoS stuff.
-
- 3 replies
- 3.3k views
-
-
For most of the length of travel for my end vice there is a little bit of friction when turning the handle when it's between about the 5 o'clock and 11 o'clock position. It's not too much but enough to notice compared to the rest of the turn. Anyone have recommendations for where to start looking
-
- 4 replies
- 3.1k views
-
-
I routed this yesterday and found that unlike Mark who went half an inch on depth on every pass that I could not do more then a quarter inch safely. If I tried doing half an inch at once the bit would catch and jerk the router bit into one of the walls. Luckily I was able to learn this on the top few layers so the bottom went smoothly. The only thing I can think about why I had no luck with the half inch is that I am using hard maple and Mark is using soft. I have a brand new whiteside 1/2" spiral upcut and a bosch router so I dont think it was equipment. Problem was most prevalent in the initial grove in the current layer when I had material on both sides of th…
-
- 3 replies
- 3.1k views
-
-
Last weekend, besides working on the endcap (posted "cock up"), I had an even bigger problem: the dog hole strip. I couldn't even bring myself to ask a question, because my results were just terrible. The router with the pattern bit was hard to control, eager to catch, and just a pain to use. I was tempted to go to round dog holes, but I decided to make a new template (the old one was damaged by a catch) and try again. Since I'm a weekend warrior I also mail ordered better routing bits, especially the pattern bit. Instead of the Home Depot house brand I ordered Whiteside Template bit - $27 through Amazon, just $9 more expensive then the pattern bit from home depot. …
-
- 4 replies
- 3.4k views
-
-
I started late on this project due to an overhaul on getting the shop up to speed. Having long wanted a larger and better jointer along with a more substantial band saw, I went with Grizzly to solve the problem. The machines have decent value for the buck without going nuts on spending big dollars. As for the workbench, the Roubo build couldn't have come at a better time. The workbench is the heart of the shop and I desperately need a good bench. Thx Marc and Aaron. Because the shop is on the smallish side, I am forced to eliminate two dogholes on the left side of the leg vise, which brings the bench down to 77-1/4". A snub nose Roubo, gotta love it. But it should work i…
-
- 1 reply
- 3.4k views
-
-
I am new to the Guild but really looking forward to this build. I currently work mainly with powertools but my hope is that this new bench will inspire me to move into the world of more hand tools. I understand how critical the bench height can be for handtools and because I am only 5'6" I assume that my bench should probably be a bit shorter than the "average" person. Is their a rule of thumb for bench height? And assuming I need to shorten the height of my bench, what is the best way to do so without making the build any more complex? Can I just lop a couple inches off the leg length and call it a day or will that result in some awkward proportions or other unint…
-
-
- 15 replies
- 11.8k views
-
-
I now have the leg and stretcher tenons and stretcher mortises made, and I'm wanting to make some progress before the next video is published, but I also don't want to get ahead of myself with the sequencing. I too am wanting to go with the non-knock-down/permanent set up, which means I plan to drawbore all leg/stretcher joints and the leg tenons into the top. Fortunately, my tenons and mortises are very smooth and tight - just backing them out after a dry fit is a workout. My question is about the sequence: I could drawbore the legs/stretchers to create the complete base, then mortise the underside of the top and attach the base via drawboring as well. However, these …
-
- 4 replies
- 4k views
-
-
I was working on the end-cap and did a test fit, just to make sure that I had drilled all my holes correctly (my drill press isn't the most accurate, but usually within "specification"). What I found was an extremely tight fit, so tight that I wouldn't be able to turn the screw. I investigate a bit and found that the milled Benchcraft parts are not in alignment with the boring template. The template is printed correctly to scale. I lined up the left screw hole with the template. You can see that the right screw hole is off by 1/16". I drew a pencil circle around the middle hole and when removing the milled part you can see that it's clearly no centered aroun…
-
- 14 replies
- 4.6k views
-
-
The cavity for my end vice ended up about 4 1/8 instead of the 4 inches in the plan. Should I just go with that measurement for the metal bars that are dadoed on the bottom or should I offset each one 1/16 to overcome the difference so that the sliding block plate has the proper clearance but not to much.
-
- 3 replies
- 3.4k views
-
-
So I have glued up the slabs and after removing the clamps I realized I have a slight problem with the front slab. On one end there is a gap between two of the boards that I can see light through that runs about 6-8 inches. I will be cutting off some of this but I dont think that will be more then 5 inches. So on the final size I expect that this area will still be included. Looks like there was some snipe causing a high spot right at the end of one of the boards keeping them slightly apart. That and probably not enough clamping pressure. Is this something that I need to address? I figure pouring additional PVA glue into this gap will not do much, as PVA i…
-
- 11 replies
- 5.1k views
-
-
I am mostly finished with the dovetail on the end block and it fits ok. Definitely not furniture quality but for my first dovetails ever I am happy. However when I drive the tails in the last. Quarter inch or so, it angles the board out of alignment but about a half inch at the other end. I can pull it back into alignment with little pressure but I would rather fix it if I can with some fine tuning of the joint. Any recommendations on where to star. At first I though the bottom tail Was a bit long and thus pushing the board out of alignment so I trimmed that up a bit. Then I though the bottom shoulder looked like it might be pushing it out so I trimmed that up a bit. …
-
- 2 replies
- 3.1k views
-
-
I am trying to think ahead on the leg laminations (Great video Marc!) and I was wondering the following: I have a bunch of ~24" 8/4 cut-offs from the top laminations. Can I laminate these and overlap them to make the legs at ~32"? Something where the seams do not line-up of course. Thoughts?
-
- 4 replies
- 3.1k views
-
-
Hi All, Received another pair of 11" wide 8/4 ash boards yesterday which had (last Friday) been skip planed and ripped to 5 1/2". When I loaded them into the shop last night I decided to check their moisture content with my Ligno. The meter read ~8.2% at 3/4" - just a half a percent above the boards that are in my shop now and have been for 3 months. Does anyone see any reason why I can't work these boards this weekend? I need to remill my long stretchers - my jointer fence was out of square - didn't notice until after I was finished. Adam
-
- 2 replies
- 3.2k views
-
-
Hi Marc & Aaron, Can you list secifics as to what changed between the v10 Sketchup drawings and the v9? Thanks! Adam Update: Just saw the "Note: Revisions in red"
-
-
- 8 replies
- 3.6k views
-
Who's Online (See full list)
Forum Statistics
- Total Topics 32.1k
- Total Posts 437.6k
Member Statistics
- 26,011 Total Members
- 3,644 Most Online
-
bobtjanitor Newest Member ·