Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

The Wood Whisperer Guild

Building a Wood Whisperer Guild project? Ask questions about the plans, share your progress, and see how other members approached the same build.

  1. If you're building the Tilt-Top Table and you were waiting for the Bell Forest kits, they're ready for you! http://www.bellforestproducts.com/exotic-lumber-projects/tilt-top-table-package/

    • 1 reply
    • 3.4k views
  2. Hello, first post here... So I'm new to woodworking and after building a dining table and several other small pieces of furniture during the first month of this new hobby I decided to go with the Benchcrafterd Split-Top Roubo as I quickly realized a pair of sawhorses just wouldn't cut it... It all started fine and have been feeling confident with my progress... I have assembled both top sections and have started working on the legs... Due to lack of space I will not work any detailed work on the top until the leg structure is finished. However, after going back to measure the timbers, I realized the front top section is 1/16th too wide clocking in at 8" instead of…

  3. Started by woodwhisperer,

    I have gotten a number of requests for an "official" tool list. Well, the problem with that is there are so many ways to get a particular job done. I was afraid that by listing all the tools I used, it might be a little daunting at first glance. But clearly the need for this list is there so I'm going to release my personal working (rough) list of tools/bits. Let's use this as a starting point and if anyone has any additions/consolidations, please feel free to post them. Chisels, circular saw, clamping guide (MDF), jointer, planer, bandsaw, jigsaw, jointer plane, hand saw, hand drill, router with Router Bits: 1/2", 3/8", 3/4" straight bits pattern bit: 1 1/4" cutte…

  4. Most of you have probably seen Marc's "Woodworker's Reflex Test" in the Roubo Guild Build video series, wherein he pops a dog up out of the dog slot and catches it mid-air. Please see the link below for my response to Marc's elementary display of reflexes. http://s238.photobucket.com/user/smithdu/media/DAS.mp4.html Marc, now what's up? Dustin

    • 5 replies
    • 4.1k views
  5. Started by Imaginos,

    It seems like most of the Roubos build built for this project are approaching a year old, so I thought it might be instersting to see what we've collectively noticed about how the benches have performed. I'm guessing that between most of us we've have a reasonable number of projects, accidents, seasons, and whatnot to cast a fairly wide sample size. My bench, (SYP flavor) needs flattened again. Mostly because there's some areas where a few unfortunate incidents have made it rough (or just hardened up) the waterlox finish I put on it, and there are some annoying dings and craters I'd like to leve out....but mostly because I didn't do it completely right in the first pl…

    • 6 replies
    • 4.3k views
  6. Started by mwatkins,

    Finally got started on the bench build this weekend. After getting everything rough milled I was a tad over sized....ultimately this is giving me about 1-1/4" oversized (3/4" in the rear slab and 1/2" in the front slab). At $4.27 per foot I can't bear to take anymore out of these pieces. My plan is to leave the extra width and add the same to the short stretchers to keep everyhing in line in the plans. Am I missing anything here? I don't see that this will impact anything critical but I wanted a second opinion. M

    • 6 replies
    • 4.4k views
  7. Started by jaz419,

    Hey all, I've been working on the roubo for quite a few months now and I'm just starting on the leg vise. Here is my problem. I mistakenly have already drawbored the front left and back left legs together. I have yet to make any mortises or drill any holes in the front left leg for the vise. The way I see it now is that I can make the through mortise for the parallel guide from the one side, no problem. I have a long enough bit. I can also drill the hole for the vise screw and make the mortise for the acetal plate without issue. My main concern is that there is no way I would be able to make a mortise for the nut plate (the nut for the giant vise screw) …

      • Like
    • 6 replies
    • 3.6k views
  8. Started by dramhadhmad,

    I am hoping that some of you might be willing to share opinions regarding any disadvantages to adding end caps on both ends of a top slab, rather than only capping the wagon vise end. -thanks

    • 3 replies
    • 3.7k views
  9. I saw another woodworker’s Roubo bench and the way he did it was to build the top out of what looked like 10/4 Douglas Fir. Each plank was about 6 inches high. But what he did was to laminate two planks together, so you end up with a piece about 6”x4” by however long. He then edge glued 4 of these together. So you end up with a top that is 24 wide by 4 high by however long. It looked really nice. I believe the reason he did it that way was to increase the yield from his 10/4 x 6” wide boards. Laying them on their side, you get to use the entire 6”, instead of cutting off 2” to have a 4” thick top. So, my question is: What are the ramifications of buil…

  10. Started by wintersedge,

    Is it too late to join in on the guild bed build? If not, about how far into the build are you now? Thanks

    • 3 replies
    • 3.9k views
  11. Started by displacedhillbilly,

    I have a source for Douglas Fir GluLam beams. They are 5 1/8 x 12" x 12'. The prices on these is almost ridiculous, $5 per linear foot. Would this be a good material to make a bench out of? I know I've read that Douglas fir can be good, but I have no experience with glu-lam beams. -Displaced Hillbilly?

  12. Started by zapdafish,

    I only have a bed with the metal frame on wheels that can be broken down into 2 long pieces. So essentially I have those two pieces, the headboard and the two matress parts if I ever want to move. What is the dogon bed like? Is it designed to be broken down? and how many pieces? Kinda interested in the build but not sure how to get it out of the workshop and to the bedroom up a kinda narrow flight of stairs. thanks

  13. Started by tonyb_2k,

    While at the box store, HD, I noticed that the hardwood molding for an outside corner was about the right size for a V track. However, its hollow on the inside, so there would be no way to screw it down. But right next to the outside corner molding was the quarter round molding; and the quarter round fitted perfectly inside the hollow of the outside corner molding. So I purchased some of both and glued the quarter round into the outside corner molding for a solid V track. Now all I have to do is plane the rounded side of the quarter round molding flat and screw it onto my stretcher. Not having a table saw makes this the best and easiest solution for me.

    • 0 replies
    • 3.5k views
  14. I am belatedly getting started on my Roubo build after spending the last year moving and my new shop up and operational. I have most of the necessary tools but most of my router bits and Forstner bits are junk so I was going to use this project as a good excuse to invest in some new, high-quality bits. I want to buy what is necessary for this project but also most versatile for future projects so I am looking for some sound buying advice from folks who have already traveled this road. Should I be looking to buy bit "sets" with the most commonly used bits and then just supplement these sets or should I just buy the individual bits that are required for each proje…

    • 4 replies
    • 5.1k views
  15. Started by Calvin,

    Marc, thanks for making the video on the roubo build. Couldn't have done it otherwise since I didn't have the skill sets previously. No pics but everything on the bench works pretty good. Used construction lumber 2x6s primarily due to lack of quality wood in Hawaii. Biggest challenge was removing twist but the router sled idea worked really well to hog off most of the twist before sending it thru the jointer & planer. My bench don't look as nice as the others but I'm one happy camper today.

    • 5 replies
    • 4k views
  16. Started by woodwhisperer,

    Benchcrafted is a small company and as a result, they will periodically have backorders and hardware changes as time goes on. Additionally, not everyone can (or wants to) afford the asking price. So I wanted to start a thread dedicated to some potential hardware alternatives. If you have suggestions, post them here. If you actually installed something different on your bench, post a picture. I would like this to be a place where we can get some good ideas. In the future, I do plan on creating an add-on series of videos discussing alternatives. This thread could certainly help me select the appropriate hardware for this. Thanks folks.

      • Like
    • 19 replies
    • 22.7k views
  17. Started by longahc,

    I plan to create an armoire that is based on the chest of drawers design. I would appreciate any feedback the community would be willing to provide - my apologies if this is out of the norms of the group - I wasn't quite sure if this was acceptable to the community. I'm specifically looking for suggestions on hinges. I wanted the doors to be flush and inset. I've never done this type of door before so am curious about hinges. Based on research knife hinges seem to be the way to go but I don't know how those would work at the top since the profile is curved. Any other options? I've attached my Sketchup file. Thanks for considering my request. Aaron Girls …

  18. Started by ddh,

    Hi Everyone - A little late to the party but I've just started processing my lumber for the Roubo workbench build. I'm a novice woodworker with a few completed basic projects so am a little intimidated to say the least! Due to small shop space and time, I'm going to complete the top slabs in two separate efforts. I've got enough boards milled up for the front slab and am about the start the glue-up but wanted to see if there were any members in the Concord, NH area (or nearby) who may have an 8-12'' jointer that I may be able to run the tops of my slabs over to ensure a flat face after glue-up. Thanks in advance! David

    • 6 replies
    • 4.3k views
  19. Started by lemonjello,

    I don't know where this was discussed, but I was thinking about this joint and think a dry large mortise and tenon and a "bench bolt" type connection in where the nut would be buried in the foot board lamination and bolt or bolts housed in dado, then a strip glued in to hold bolt in place on underside or rail. Or my other thought is to use a pair of handrail bolt connectors called a "Zip Bolt" with the dry fit tenon with the bolt part in foot board and "Zip" part in the side rail. What do you all think?

  20. Started by alaporte,

    Just wondering if any was building? I modified the design a bit? My bookcase has 3 fixed shelfs and 4 adjusting shelfs? Well one fixed shelf is really the top. So far I have the sides compled and the 3 fixed shelfs. Tonight I cut out the face frame and aligned everything. I'm planning on using domino's to connect the face frame together and the again to attach the face frame to the carcase. What's everyone else doing? AndyL

      • Like
    • 15 replies
    • 5.9k views
  21. Started by Torch02,

    Working on my Roubo and while I still have to flatten my top, I'm thinking ahead to the planning base. I was able to get a top slab that is 9'9" long (117") which is 20" longer than the plans. I'm asking for some help in determining where to place the legs on this longer bench. Two questions - Should I center/balance the legs? and What should the over hang be on each end? The guild plans call for the legs to be offset with respect to the overhang on each side, but I would guess that has to do with the room needed for the Benchcrafted tail vise. I'm not using that hardware, so I don't have that specific restriction. I have a Record quick release vise that I'll nee…

    • 4 replies
    • 4.7k views
  22. Started by Tony Wilkins,

    Pretty much what the title says. I'm trying to weight the pros and cons of the split-top on the Roubo and wondering if anybody has regretted doing it that way once they started using it. TIA, Tony

  23. Started by Eric.,

    Just got the annual Tools and Shops supplementary issue of FWW, and was pleasantly surprised to see the BC Roubo headlined. It's strange to get an issue of FWW and instead of saying, "Hey, I'm gonna build that!" I'm saying, "Hey, I built that!" I also found it amusing that the author was working on one of his bench legs on his already-assembled bench. Maybe he's building two. Can't be a bad thing for Marc and the Guild. Wonder how many new members he might get with the additional attention?

  24. Started by Scott Seganti,

    I found this over on Lumberjocks and thought the folks here might find it interesting. http://lumberjocks.com/reviews/3065

    • 2 replies
    • 3.7k views
  25. I've got a stash of white oak. I see people using this for the base, but switching to ash for the top. Why is that? Wondering if I can use what I have, or if I really need to go buy more wood? Thanks!

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.