Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

The Wood Whisperer Guild

Building a Wood Whisperer Guild project? Ask questions about the plans, share your progress, and see how other members approached the same build.

  1. Started by MikeDunlop,

    I am having a problem with my tail vise installation. The vice moves the full length very smoothly when the the flange nuts are tightened snuggly by hand, however once I tighten them with the wrench, I am getting a lot of resistance. After putting in the upper left flange bolt (viewing from end with bottom up) the other bolt goes in very tight. My only thought is to make the hole a little larger so that the bolt goes in easily and then retry it. Does anyone have any ideas? Mike

    • 4 replies
    • 3.4k views
  2. I'm a fairly new woodworker and a newbie to the Guild. I was very excited to build this chair. I learned quite a lot of new techniques and skills I may never had learned, if not for Marc's incredible teaching style. Thank you Marc. I look forward to learning a lot more from you. I hope to one day in the future, attend one of your classes or William Ng's classes. Bob Devereaux

    • 7 replies
    • 8.3k views
  3. I went back and forth and read plenty on the whole chevy/fart round/square thing and have decided to just go with a set of rounds and in skimming over the plans for the past little bit I am not seeing why I cannot just glue the whole front slab up full width..am I missing something here? I am heading out to pick up all the materials tomorrow morning and when I get back Ill continue reading and watching the vids but wanted to get your take. Thanks

    • 4 replies
    • 3.1k views
  4. Started by Chopcat,

    Ok so time to bare all and spill the beans on the cock-ups you make as you go through the build. And hopefully the ways you get round them. I shall start, with probably not the first of mine. I got to the glue up stage with dog strip and on checking the squareness of the end of the dog strip, nearest to the vice end, (yes after it was glued) found that it was not. Square that is. Problem stems from the chop saw being slightly out, That hadn't mattered until this point. So to get over it I set up some blocks on either side of the top and used a fence to rout the end of the dog strip square again. Now who else has something to tell us!

      • Like
    • 46 replies
    • 11.2k views
  5. Started by AlexPeel,

    Posted this in the comments on guild website on the dog hole strip video page but thought I would repost it here incase it could help anyone out who had not gotten to this part of the project yet. Couple pieces of advice that came in handy on my build of the dog strip. First: Mark mentions being careful about not routing through the lip of the template which holds the two template pieces together. Well when I was routing I found it almost impossible to see exactly where I was and I almost cut through the thing. I realized if I simply filled in the space between the two templates halves with a small piece of scrap that I could use the router bushing to keep …

    • 2 replies
    • 3.6k views
  6. Started by Imaginos,

    I guess the sensible thing is to wait a while until I have some more experience and can build this bench right. The lure of the Benchcrafted site the Shcwarz's book was too much because I gave in last night and I'm bulding a Roubo anyway. I'll probably get the vise screws from Lie Nielsen or Veritas instead of the BC hardware; sexy as it is I just can't swing the good stuff anytime soon. I do have a problem that with no table saw, no jointer, no thickness planer, I think I've created a massive amount of work for myself. I got a Veritas bevel up jointer from my wife for christmas. That partially solved the milling problem and introduced a host of new sore spots in my shoul…

    • 9 replies
    • 5.8k views
  7. Started by peter_bernhardt,

    Here's a question for those who have completed the build per the plan: is the base stout enough to prevent wracking? I'm concerned that the Benchcrafted design, which accounts for a knockdown configuration, sacrifices the sturdiness that is guaranteed by using through tenons for the legs to join the top. I'm at a key turning point having just cut the 1 inch tenons on my legs per the plan, but they don't look nearly substantial enough. Since I'm not building this for knockdown, I'd rather modify the design now to get the sturdiness I need than just follow the plan and be unhappy with the result. I use hand tools primarily, and I need this thing to be rock solid when I'm…

    • 6 replies
    • 4.4k views
  8. Started by Joraft,

    I'm kinda glad I'm running so far behind on my build :

    • 11 replies
    • 3.9k views
  9. Started by MikeDunlop,

    I made it to the lumberyard on Friday. Just like a little kid at Christmas I was excited about getting something new. This is the most ambitious project I have ever started in the shop. I can't wait to see this come together. However the lumber buying experience was not all that pleasant this time. When I got to the lumberyard and told them I wanted 200 board feet of 8/4 soft maple 8 feet long I got a dirty look from the forklift driver. The pallet was burried in a warehouse and on a Friday afternoon he didn't seem overly enthused about digging it out. He wanted me to buy 10 foot lengths cuz it was easy to get to. I told him no and that I needed 8 footers, so I had…

    • 12 replies
    • 3.7k views
  10. Started by Kevmc,

    Final Project Post I am now completely finished with my Roubo Workbench and it was an awesome learning experience and while I am really glad its finished, I am going to miss the Friday video release and the challenge of squeezing in time during the week to keep mostly on schedule to finish the build. I learned a lot during the build My fence on my jointer/planer is not nearly as square as it should be and is easily knocked out of square when adjusting it. I need to always double check. Once I figured that out, wood prep was a lot easier Wood selection is critical. I ordered my stock from a local mill in 12 foot lengths and in my infinite wisdom asked them to plane t…

    • 3 replies
    • 3.3k views
  11. Started by Kevmc,

    I am working on mortising the base unit to the top My problem is that the two front legs are a bit off square so that if I try and align the face of each leg with the front edge of the bench is doesn't really work. if I align one of the front corners of the legs, the other corner of the leg ends up being about 1/64 to 1/32 or a little more proud of the edge of the bench. I was thinking of either squaring up the legs with a plane, at least where they connect to the bench. Alternatively, I can align the slab with the other corner of the leg l then plane the front of the bench. What do you guys think the best approach is

    • 10 replies
    • 3.9k views
  12. Started by dvoigt,

    This question is directed more to those that are pro's at this stuff . As with alot of my thoughts on this projects, I was wondering if someone came to you and said they wanted a custom built wall hanging cabinet, what would you charge for it? Assume that it is made from Cherry and your materiel cost are in that $150-200 range and the size is the same as the one built in the guild. I was figuring that about $600-700 would be a reasonable price. Maybe $800-1000 when you get into fancier woods. What do you guys think? I know that everyone's pricing is different and everyone has their own math to come to the total, so speaking in general, is $600 crazy cheap and…

    • 4 replies
    • 4.7k views
  13. Started by bjorn rettig,

    I'm done. And I'm really happy. This was one of the best projects I have done. I absolutely enjoyed it. If you dream it, you can build it! Without the videos I know I would have never completed it. I feel giddy with excitement thinking about how much I learned. Tomorrow I will go to the Marc Adams school of woodworking and have a class with Michael Fortune - and Christopher Schwarz will be there building a workbench with another class. I wanted to be done before that and I made it. Not I can turn my attention back to my regular woodworking. thank you! --bjorn

    • 28 replies
    • 9.7k views
  14. Started by Grim,

    Well, the old saying that you can never have enough clamps held true for me. After planing down the bench top to just a few hairs over 4" I found a bunch of gaps between boards of my glue-up. Fabulous. Evidently I needed more clamps and pressure. Live and learn. Now I need to know how to fix it. The gaps are fairly small, the widest being .019" as measured with a feeler gauge. Unfortunately, although most are on the end due to planer snipe there are some far into to bench top so I can't just lop them all off. If I somehow thin wood glue can I get enough in there for it to hold if I clamp it? Should I use epoxy? Any suggestions would be appreciated.

  15. Started by Chopcat,

    To personalise my Roubo I am going for something different. Here is the sketch for Dead Woman......Hey we need not be sexist and just stick to men in the shop. Anyway I shall post the results on the blog when I get round to it later at the weekend. Anyine with any other ideas for this interchangable part of the bench?? CC

    • 19 replies
    • 4.6k views
  16. Started by allencrane,

    What is the name of the screw/holdfast in the guild picture of the deadman? Where can I find one? Thanks in advance!

    • 9 replies
    • 3.6k views
  17. Started by AdamAronson,

    Ouch! Lotsa kickback and nasty mortises... Here's the post I posted at Router Forums earlier today. I've edited the post for context. In case anyone is interested in following the discussion there I'll PM the URL. Not sure that "cross posting" here isnt punishable by death as it is across the forum world. My setup for this particular operation was a PC 890 w/edge guide, 8931 (type 3) and a Whiteside 2" spiral upcut carbide bit 1/2" shank. I am routing the stretcher mortises in ash and even with light passes (1/8") I am experiencing frequent kickback. Mostly this occurs at the end of the cut on either the first pass (routing the 1/2" W cut) or on the second pass f…

      • Like
    • 34 replies
    • 10.4k views
  18. Started by jbruett,

    Anyone else have issues with Benchcrafted not responding to your requests for the invoice for hardware? My last communication with them was 2/13, requesting the invoice, and I haven't heard back since. Considering the price of this stuff you would think that they would be a bit more responsive.

    • 11 replies
    • 4.9k views
  19. Started by Mark Henley,

    Your Shaker Table series has certainly paid off for me! Desk top is done , leg assemblies are complete ... Working on the drawer now ... But I have to travel this week .... So a week of downtime:0(

  20. Started by woodwhisperer,

    As I approach the base portion of the workbench build, I find myself wondering if I should bother with the knock-down joinery. For me personally, being able to remove the top is mobility enough for if/when I move the bench to a different location. Flat-packing it just isn't necessary. So I'm thinking I will just use glue and drawbore the joints. My question for those who are building this bench is, do you see a real need for the knock-down joinery? I might just cover the drilling technique using sample pieces so you can see how it is done. But I am trying to gauge just how many folks actually plan on using this method.

    • 31 replies
    • 10.5k views
  21. Started by Steve Lyde,

    I now have 13 days and several dollars invested into this project and I'm very pleased with the out come thus far. I still have some work to do on the leg vise, the bottom shelf and the gap stop. Today I got the leg assembly all finished using the knock down hardware. Also got everything turned upside down and the mortises cut into the bottom side of the top slabs. And finally it's back upside right and starting to look like a work bench!!!

    • 3 replies
    • 3.1k views
  22. Started by Kevmc,

    I need to thin down the pin that goes into the leg vice guide a bit because the fit it to tight. I am looking for recomendations for how best to do it. I did chuck into a drill press and used some sandpaper but it barely budged the size. Perhaps it was too fine do sandpaper. I also have access to a grinding wheel. Could I chuck it into a handheld drill and run it against a grinding stone? Hopefully I can do this without buying more tools. My wife has already called my bench building project a poor excuse for buying more tools

    • 3 replies
    • 3k views
  23. Started by dc808,

    Wanted to turn a handle for the guide pin to match the wood on the Benchcrafted vises. E-mailed Benchcrafted and asked what kind of rosewood they used and the referred me to the FAQ. Reread the FAQ, didn't see what I was looking for. Does anyone know what kind of rosewood they use? DC Smith

    • 1 reply
    • 2.7k views
  24. Started by bjorn rettig,

    I was only able to work in the shop today, but made good progress. Still need mortises in the top, but I wanted to see the bench, so I put the top on.

    • 7 replies
    • 3.5k views
  25. Started by Steve Lyde,

    I have enjoyed the Wood Whisperer web site for a few years but this project is what pushed me to join the Guild. I purchased plenty of 8/4 rough maple yesterday and got started milling it up today!! I have the tools to deal with the rough lumber so it saved me a couple of bucks on the lumber cost. Wish me luck.

      • Like
    • 20 replies
    • 4.9k views

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.