The Wood Whisperer Guild
Building a Wood Whisperer Guild project? Ask questions about the plans, share your progress, and see how other members approached the same build.
500 topics in this forum
-
It is my understanding that the box is supposed to get cut into the lid/bottom after being turned into a box. This sounds like a great idea to ensure a nice tight seam, but it does immediately leave me wondering how Marc intends to do this. My first guess is with a band saw, but I am curious and hopeful that there is a more ingenious solution as I don't have a bandsaw. I know I'm skipping ahead a few weeks on the build, but I'm trying to plan how I'll do this. Thanks.
-
-
- 8 replies
- 7k views
-
-
Hi everyone! I'm kind of new to woodworking - I've done a few small projects here and there, and was wondering how advanced a project like this is. Would anyone recommend this project as a first step into a larger world?
-
-
- 11 replies
- 4.4k views
-
-
It's basically impossible for me to do anything the simple way. I just couldn't bring myself to use magnets.
-
- 3 replies
- 3.7k views
-
-
It is going to be impossible to pick a veneer!! Every time I find one I really like, there are half a dozen other sheets I like just as well. It's like a woodworking Sophie's choice.
-
-
- 10 replies
- 4.8k views
-
-
Is there any word on when Bell Forest will have the kit available for this project? I didn't know they sold kits until about a week ago. I got supper excited when I saw it on their site because I don't have a jointer/planer.
-
-
- 7 replies
- 4.3k views
-
-
-
I've been following Marc since his first videos with the cutting board. Unfortunatly I've not been member of the guild till last year. With work and been a father of 2 little kids don't give you a lot of time and I'm sure some people can relate to this. I think, I feel ready to do the Split-Top Roubo Bench and I was wondering if for members of the guild is the same price of $100 to buy the videos. Also, has anyone around the Montreal - South Shore area have done it? If so maybe we can exchange contact info. Good woodworking to everyone.
-
-
- 8 replies
- 4k views
-
-
Does anyone here own a platform bed and what are your experiences with it? The reason I ask is because when I look at the drawing of the bed Marc is working on, my first thought is that I am going to need shin guards to get in and out of it. It just seems like that wooden "lip" (for lack of a better term) sticking out past the mattress would be uncomfortable if you're trying to sit on the edge of the bed, and could get in the way when your climbing in/out. The other question is do you not use a box spring with the platform bed? Does it take a special kind of mattress? Having said all that, let me just add that I don't mean to come across as critical of Marc's design an…
-
- 5 replies
- 5.3k views
-
-
Finally got a start on chest this week (wife and bub away for week). Couple of quick questions. Has anyone thought of or think it would be usefull to put a divider in the middle. Thinking of this for 2 reasons. First to help stop warping and secondly could put some sliding trays at one end. Would be attached by sliding dovetail with maybe a cloudlift on the top. Also after routing out my fingers using the template I thought they would be a very snug fit but although not loose and have no wobble, they do slide together very easily. Not concerned about this just interested in others results. I will pull my finger out and take some photo's soon. cheers
-
-
- 6 replies
- 3.7k views
-
-
Finally finished this... I made it for my daughters upcoming wedding (in addition to the seemingly gazzillion dollars being spent!) As you can see, I went with 9 fingers on the case and some other variations from the plan, no handles and I skipped a couple of plugs on the breadboards. I'm happy with the way it came out. I did GF, 2-1, orange to medium brown and GF Arm-R-Seal. I'm not 100% thrilled with the finish and was looking for that butter soft feel to the top, but there are some nibs I can't seem to avoid. This is technique, I think, as the finish itself is pretty easy to work with. If I put a thin, ie dries before too much debris falls into it, coat on …
-
- 10 replies
- 4.2k views
-
-
I hate to ask a stupid,no right answer question,but... I'm thinking of using walnut for this project.i love walnut and just picked up some up at $3 bd ft,which is cheap here. Would like to hear general thoughts,as well as suggestions for the plugs. Something light colored? Maple good enough? thank you!
-
- 9 replies
- 4.1k views
-
-
I'm making some super sized versions of the wall hanging cabinet for garage storage and joinery practice. They are made of some sort of soft wood (sold as "white wood" at lowes), and I am guessing once mounted to the wall will need to be capable of a working load of about 130lbs (the size is capable of carrying about 12 1gal paint cans). I plan on using a French cleat system to span the entire width of the cabinets (about 35"). Question is will I be fine using the softwood to make the cleat? Seams like the weakness will be in 45degree cut, but I think all the force is going straight down so that 45 shouldn't be too stressed. Love to get some second opinions. Thank…
-
- 18 replies
- 19.9k views
-
-
Any updates on when this version will be available? I still can't get the sketch up version.
-
-
- 2 replies
- 3.2k views
-
-
Hello. I'm late to the party, but very much looking forward to building this workbench with my son. I'm a woodworking newbie, but rather handy so I expect I'll be able to make this work (surely with some hiccups along the way, though). Anyway, I've gone on a shopping spree of late and have a bunch of specific questions I feel ill-equipped to solve on my own: Straight router bits (to be used in Festool OF2200) Diameter - It appears that I need 3/8" and 3/4" straight bits. Is this correct? It's not explicitly clear from the project summary page. Assuming that's correct, are both really required? Could the 3/8" handle the tasks for the 3/4", just less efficiently? …
-
- 4 replies
- 3.6k views
-
-
Hi everybody, after yesterday live session i was thinking of a question. Can I change cedar for hard wood on the outside and just do the liner in spanish cedar for a humidor. I was thinking to do three humidor, one in veneer sure but maybe one in hard wood with just cedar liner. What do you think?
-
-
- 9 replies
- 4.8k views
-
-
What size of these hinges do I need for the build as drawn? Solid Brass Small-Box Quadrant Hinge 1-1/4''W x 1-1/4''H x 3/16'' or Solid Brass Large-Box Quadrant Hinge 1-5/8''W x 1-5/8''H x 9/32''
-
-
- 1 reply
- 3.7k views
-
-
Red Oak and Purpleheart woods , red oak and a cinnamon stain (2 parts red oak 6 parts cinnamon)
-
- 15 replies
- 4.1k views
-
-
Hi Guys, I'm looking for an opinion as to which to do first of the Adirondack Chair or the Wall Hanging Cabinet. I have wood for both and was wondering which sequence would provide a better skills progression. I have watched most of the videos for the chair but have yet to have a chance to watch the cabinet videos. Thoughts?
-
-
- 9 replies
- 3.8k views
-
-
Good morning guys , I hope everyone is getting there with there project, last night I finish the deck ,riser frame and base , in the rough at least....in the third picture with the assembly put together you can see where the bottom will be , and the case will seat on top of this assembly screwed thru the bottom of the riser frame.....would like to see pictures of you project.
-
-
- 64 replies
- 14.8k views
-
-
Hi there, I finally managed to start my Roubo ! I bought last year half a ton of beech already dry . In this bunch of slabs, there are two or three that are 31⁄2in thick and 105⁄8in large (9cm x 27cm). These slabs are pretty flat, no twist. Here a picture of one of them already milled : My question here is: can I build the (split) top from two of these slabs as they are or do I have to laminate it in order to prevent wood movement or whatsoever ? Thanks in advance !
-
-
- 10 replies
- 4.5k views
-
-
I started milling my case panels. 2 of the panels had just enough bow/unevenness? where I had to plane them down to 11/16, so I had to mill all the panels to 11/16th. That will not be too thin will it, strength wise? I'm using Red Oak at 8+ inches wide (2 boards) eventually cut down to the 15 1/2 inch height I used a 6 inch jointer and then marc's method on the thickness planer , using a known flat panel (mdf) to get the board to go thru the thickness planer properly.
-
-
- 11 replies
- 4k views
-
-
Hey Marc, I'm just back in from the shop and I have to tell you. I hand cut a few tennons on a curved piece that will one day be part of my son's headboard. Anyway, I'm sure I would have figured something out in the past, but I wanted to say "I love my Roubo!" This comment may or may not be unique to Roubo's but I can tell you that I used both the leg vise and the hold fasts. I switched between them quickly to hold the work pieces as I cut the depth cuts and the cheeks. I switched them again to plane the tennons to size at the end's of the curved pieces and I can't imagine how it could have been easier. Thanks again, for that project. I can honestly say both th…
-
- 0 replies
- 3.1k views
-
-
I was very fortunate to find a local supplier of some beautiful African mahogany, but they only had 4/4, no 5/4. I was able to mill very lightly on the base and only had to compromise about 1/16 in final thickness for each piece (for a total compromise of about 1/8 in each direction). So the base and cleats don't concern me, but here is what does... I definitely want the breadboard ends to stand proud of the top. I have plenty of 4/4 that I could face joint and then plane down to thickness for this and it would match perfectly, but I'm concerned that the long tenons in the top (and the screws and tight fit of the ebony plugs along the sides) may want to split the brea…
-
- 3 replies
- 3.5k views
-
-
Hi guys.....I made some changes to the design , that I would like to share with you , so far I put the case together with 9 fingers on each corner , and instead of making grooves for the bottom, I made it a frame and panel so that I gain some depth , and it will attach to the front , back and sides with screws through the bottom. I assamble the case with screws but no glue , would like your opinion on this. I am attaching some pictures
-
-
- 23 replies
- 5.3k views
-
-
Hi guys, I am looking at the Adirondack Chair as likely being my first guild build. I have a relatively large selection of power and hand tools (and not opposed to getting more) but, I have neither a planer of a jointer. I do have a good selection of hand planes that I am working on becoming more proficient with. How much more challenging would this project be without access to a planer and jointer? I have considered getting one of the lunch box style planers, but my workshop doesn't have the floor space for a jointer or a full size planer. Part of me is excited about this being my first major foray into hand planes and part of me doesn't want to get discouraged and f…
-
- 3 replies
- 3.6k views
-
Who's Online (See full list)
Forum Statistics
- Total Topics 32.1k
- Total Posts 437.6k
Member Statistics
- 26,011 Total Members
- 3,644 Most Online
-
bobtjanitor Newest Member ·