Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

The Wood Whisperer Guild

Building a Wood Whisperer Guild project? Ask questions about the plans, share your progress, and see how other members approached the same build.

  1. Started by morganew,

    I have a smaller shop (11x22), and with the way I am currently set up, I really can't go much over 5 feet. 6 would require significant re-jiggering of other tools. Has anyone built a shorter split-top? If so, what changes did you make or problems did you discover? DId you do a new sketch-up that I could pilfer? Thanks all for any input.

      • Like
    • 30 replies
    • 13.4k views
  2. Started by Kevmc,

    I am all set on gluing up my laminates as soon as I glue arrives but when I prepared my stock I have some defects in one of the middle laminates on the side where their is some missing wood and discoloration. I can deal with the discoloration and the defects may be jointed or cut off when I size the arms to the right width but looking at the piece of wood, I am not totally sure about that. Do you guys have any recommendations for filing the gaps on the edge of the arms. this is in no way structural and there are no gaps between the laminates, just the edge of one of the boards. Can I mix some sawdust with some epoxy and fill it before jointing that edge flat? …

    • 4 replies
    • 3.8k views
  3. Started by AlexPeel,

    So I finally moved my bench to its final resting spot, after a half a year of it being done, after starting on it 2 years ago. I was re-admiring how awesome it is to have and I realized that some of you may be interested in seeing how the criss-cross turned out. There are a couple other criss-cross threads where we discussed the modifications that need to be made from the original plans if you are interested.

    • 3 replies
    • 4.7k views
  4. Started by Dnorris1369,

    Wondering if any of you guys built the wall hanging cabinet. I'm in the process of the build and have a few questions so I don't screw this up. Thanks Sent from my iPad using Tapatalk

  5. Started by Daniel Berg,

    Okay so my wife wants deck furniture and I being a halfway normal husband is more then happy to oblige. So let the internet searching begin! Halfway decent hardwood sawyer: Check! Pricelist for said hardwood: Check! Cedar, Aromatic: HUGH? I am obviously wood stupid, you want fire alarm code and theory out of me and I can talk your ear off. So I am turning to the guild, is "regular" cedar and aromatic cedar the same thing? Should I go with cedar? Am I gonna get robbed here, not literally, but being a good German boy I want to have good value for the investment. Here is a link to their pricelist. As the man with the cowboy hat and the mustache said "…

    • 9 replies
    • 4.2k views
  6. Started by Kevmc,

    I want to be ready for the glue up. What glue should I get. I see all kinds of recommendations from titebond to unibond 800 urea formaldehyde glue. Thanks

    • 11 replies
    • 6.9k views
  7. Started by TerryMcK,

    I'm going to put this in the project showcase section with a little more back story but for now here are the photos. The sliding till with Brusso quadrant hinges The double happiness characters. Mother of pearl and ebony A view of the quad book matched oak burr veneer used on the lid

    • 0 replies
    • 4.6k views
  8. Hello, I am building the Split-Top Roubo. I have the new Criss Cross leg mounting hardware from Benchcrafted. All was going well with building out the legs...... until I drilled the hole for the bolt that goes into the barrel nuts on the long stretchers. The hole is supposed to go BEHIND the bottom plate for the criss cross hardware. Of course my hole ended up cutting into this mortise. I need suggestions as to how to fix this. I do NOT want to start over on the leg and front stretcher. I was proposing to use a 1/2" dowel to fill the current hole, and after the dowel is set, redrill the hole for the bolt. I would also plug the hole on the stretcher…

    • 0 replies
    • 3.7k views
  9. Started by BuilderBill,

    So where are you going with this? Marc and Aaron have given us a great starting point, are you going to go with the plans as published or vary in your choice of wood and style? Personally, I really like the look of the Stickley Metro Morris chair in walnut and cherry. I also like their Pasadena interpretation but the G&G style is a bit busy for my taste on this one. It seems to me like the Morris wants to be simpler, a few curves and a splay suits the basic design, IMHO. I've ordered the Bell Forest kit in cherry and have some walnut lying around waiting to be made into something, a Morris chair seems a worthy destination. Honestly, prior to this I would have …

      • Like
    • 14 replies
    • 4.7k views
  10. Started by mlingenfelter,

    I thought I would share these photos of a couple Morris Chairs I built in the Greene & Greene style. I really like how they came out. I took some heat for my design, from the people over on the Yahoo Greene & Greene forum. I guess I'm up for some more abuse, because I'm posting this again. The chairs are basically finished, I just have to get the cushions made. My sister is good with the sawing machine and she said she would give me a helping hand. We just need to get out find the fabric we want. I'm not sure what Marc has planned for his cushions, but I found this site that has some good information and you can order foam from them. http://www.diyuph…

    • 8 replies
    • 5.5k views
  11. Howdy everyone, This chair is going to be my first attempt at a real project. I've been watching in the back ground saving for a few tools and now I have them. Anyway, I live in the boonies and it's hard to get anything other than basic pine, cedar and some redwood. I would like to try cedar b/c I have the options of 1 or 2 inch thick boards. The problem is that finding 5/4 is going to be impossible. Can I just use a 1" board or do I need to mill it down (which seems like a lot of extra work)? Thanks

    • 8 replies
    • 4.2k views
  12. Started by AMarshall,

    Just wanted to mention a couple quick notes about the plans. First, thanks for everybody's patience. It's taken me longer than expected to get this set of plans together, for a lot of whiny reasons. But the final plans are now complete and sent off to Marc for distribution. He should have them up very soon. There aren't any changes to the design, just a few more pages of views and a shiny cover page. Oh, and I got rid of the sweet 1980's hunter green cushions. Marc should like that! If anybody has questions or problems with the plans, post in this thread and I can help. Marc's good with the woodworking, but he jacks up SketchUp all the time. If you need h…

    • 4 replies
    • 4.1k views
  13. Started by dvoigt,

    I opted to go with maple plugs that were flush with the face of the mahogany to match the inlay cross and the birch plywood on the inside. All the rest is the same as the plans.

    • 8 replies
    • 4.3k views
  14. Started by Zombolina,

    Greetings, I'm starting the build this week to hopefully finish for my niece's wedding at the end of July. I like the idea of a locking mech (only the keyhole showing in the in the front center), but I've never used one. Does anyone have any suggestions for brands, sizes, vendors? Thanks all!

    • 4 replies
    • 3.8k views
  15. Started by W1ngnu7_1628,

    The bottom looks like it should have larger wenge strips to meet up with the veneer. Was there a reason to allow the ceder to show between the edging and the veneer?

    • 4 replies
    • 4.1k views
  16. Started by BuilderBill,

    Just got Marc's email with the plans and the link to BFP for the kits. At $11-12+/bft for the white oak they seem a little pricey, anybody have experience with their kits and is it worth the extra cost if you have access to local lumber yards? QSWO around here is going for about half that or better at commercial suppliers. I don't mind paying for quality product but $280 is a lot of trips to Starbucks with dinner at Houston's thrown in. And I like Starbucks coffee and Houston's. Just wondering, looking forward to the feedback. Best, Bill

    • 13 replies
    • 5.7k views
  17. Started by Shannon1066,

    I am relatively inexperienced but I decided to tackle the Rubo anyway. Marc's videos are so detailed he makes me believe I can do it all . I've milled up the top slabs and glued them together. BTW this is the first time I've milled anything. I was able to put the front slab through my 8" jointer but I'm having problems with the rear slab. I've been trying to flatten out the bottom with a LN Low Angle Jack Plane so I can put it through the planner. I've never used a plane before and I'm horrible. Not only do I have massive chip out but I the slab is starting to look like rolling hills. Is there a way to flatten out the bottom without my having to gain experience …

      • Like
    • 7 replies
    • 4.3k views
  18. Im thinking about making the Morris Chair project with the guild, but scaling it to 1/2 or 2/3 size for my 2 year old son's room. Aside from scaling all the parts smaller, any thoughts as to the difficulties I might have in translating the guild build plan to something more kiddie-sized?

  19. Started by imcmahon,

    I get some flooding in my shop after heavy rains, and I've been thinking about ways to protect the feet of my bench from sucking up water. My bench is nearing completion, and built from southern yellow pine. I was considering dunking the ends in west systems epoxy (I have it on hand already). Do you guys have any opinions on whether this will do an adequate job of penetrating and sealing the endgrain?

    • 13 replies
    • 7.1k views
  20. Started by BuilderBill,

    New member, joined mainly because of this project. So looking forward to this! Best, Bill

      • Like
    • 39 replies
    • 9.8k views
  21. Started by Charles Clayton,

    I've been putting off getting a router table because space is limited for me. I did make a small rolling worktable that holds my midi-lathe and grinder and I cut a space below the lathe to keep chips from piling up near the motor intake. One thought would be to put a router plate in that space. I could pull the plate when doing lathe work and pull the lathe and grinder off when doing router work. I'd still need a fence but maybe something simple clamped to the top of the table would work. The other thing I'm curious about is using a dovetail plane like the one linked below; it would take up a lot less space and I like working with hand planes Does anyone have ex…

      • Like
    • 14 replies
    • 6.2k views
  22. Started by Ted Friesen,

    I've gotten to the point of making the dovetails and after watching the video a few times, I'm not sure how to proceed and need some advice from those of you that have done this already. Here's my problem...my bandsaw doesn't give me anyway near the surface that Marc gets from his, at least as far as I can see in the video. Would you mind sharing what blade you are using and if you ended up having to do much in the way of cleanup to the dovetails after sawing. Ted

    • 7 replies
    • 5.4k views
  23. Started by Dhall65,

    Well it's time to make a work bench top. I've been looking for some soft maple but here in Santa Barbara California, that seems to be unavailable . Every local saw mill says to use poplar . Can't say I would like a green bench top. Has anyone used Doug fir?

  24. Does anyone see any issues with making the template a bit wider and using guide bushings to rout the dog holes out? I just started the bench last week and I am at this point, but do not have two routers and the pattern bit I have is has bearings on both sides. I could buy a pattern bit, but was thinking this should work. Thanks for the help.

    • 3 replies
    • 4.8k views
  25. Started by mlehikoinen,

    From the old forum, Nathan created the thread. Thought I would carry it over here. Per Nathan ... "I figured since this was a forum topic for the shaker table build, why not have a thread showing off your work? It also serves as a personal benefit for me as I'm trying to decide what finish to apply on my table. So show us the tables! Be sure to include: species, finish applied and any other special notes" Here's my table. Ash base with walnut top. Finish is wipe on poly, but only a couple of coats as I wanted to keep it simple and natural looking.

      • Like
    • 18 replies
    • 10.2k views

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.