Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

The Wood Whisperer Guild

Building a Wood Whisperer Guild project? Ask questions about the plans, share your progress, and see how other members approached the same build.

  1. Hello, My understanding is that this bench is based on the benchcrafted shaker bench. Correct? Surprisingly, I haven't seen a single guild build that included the shaker cabinets. If I bought their $40 plans, would it mesh 100% with the guild plans? Or did Marc tweak the dimensions/design? Thank you.

  2. Started by CJC5151,

    Hey guys, getting ready to start my new bench...I do have a question about the vises. Has anyone built their own vises with wooden screws... There are 2 reasons why i ask this. First the obvious is cost...I know the reviews for the bench craft hardware is incredible but ouch it is just as hard a hit to the pocket book. The other reason is i'm a power tool guy. That being said, because my skills are advancing i have definitely seen my method of work incorporating a lot of hand work...hence the bench build. But since everything else in my shop is loud and modern, I like the idea of when i go to the bench i'm more traditional, and i would like to make my own wooden sc…

  3. Started by dustinsmith,

    Well I'm almost done -- just need to do the final sanding and apply a Danish oil finish. Let's hope I do that I don't keep putting it off! I went with all soft maple, except for the roller brackets and parallel guide which are hard maple per Marc's suggestions. All in all, this has been my favorite project I've built so far. It is beefy, expensive, and a pure joy to use. Sometimes I stop by the garage on my way to work just to look at it, and maybe play with the vises a little. I'm hoping that urge goes away after a while! Dustin

    • 5 replies
    • 3.8k views
  4. Started by skiback46,

    I have the bench all put together now, and as I was chamfering the ends of the slabs I realized my block plane was hitting the other slab. So I got out my straight edge and checked. I must have bumped one of the slabs a little less than and 1/8" when i was marking for the mortises. the front slab is shifted a little to the right, or the back slab a little to the left. So that means the tail vise sticks out farther than the backslab. I forgot to take a picture last night. So I see a few options. 1) Leave it 2) True up the left end (no tail vise), and leave the tail vise side the way it is. 3) Recut the mortises in the back slab and shim the big side to bring…

    • 4 replies
    • 3.5k views
  5. Started by Grim,

    I was cutting the tenon for the endcap to go on thinking... "Yes, this is upside down, so I need to do this backwards of what it should be..." And, somehow, I don't know how, I managed to put the tenon on the wrong side of the correct end of the front slab. I meant to make it just like Mark's (well, as much as one can try to be like him). Instead I made it so that the tenon goes all the way to the left side (if it is the correct side up) and not the right. Will this create structural issues? Suggestions to fix the print of my palm on my face?

  6. Started by Buddha,

    Hi everyone, first of all I wanna say hello to all the guild members specially to Marc! I just recently affiliate and my first project as a newbie without a bench will be... any guess? right, a workbench! Planning before sawing anything I was thinking to split or not to split the top. If I go with the second option I want a tool well on the back of the bench, like the one seen on Schwarz DVD´s. Anyone has any plan, sketchup anything to study how to integrate this one with Marc´s workbench?

  7. Started by markorjack,

    Hi All, I am a Roubo newbie from Australia. I'm currently in my second year of Furniture Design study at University. A while back I purchased the vice kit from Benchcrafted and plan to build the Roubo over my Christmas break which is Summer here. Is there a metric cut list available? Cheers, Jack.

    • 2 replies
    • 3.5k views
  8. http://benchcrafted.blogspot.com/2012/09/crisscrosss-pricing.html Anyone that was interested in the new criss-cross leg vise modification from benchcrafted, they are now taking pre-orders. Pricing seems reasonable for adding it on to an existing benchcrafted leg vise. Saying it will start shipping Dec. 3rd. Fortunately for me I have been unfortunately unable to work on my bench for the last half year and wont be able to get back to it till December so this is perfect timing. I was just working on my bench legs when I stopped so it will all work out as a fresh install. Anyone else thinking of getting it?

  9. Started by AdamAronson,

    Celebrated my 46th birthday today by putting the final touches on my bench. I'll enclose some of the photos here --- more available in this Flickr photo album.

  10. This question is geared towards those who have built and are using the split-top roubo. I am curious to know how you like the split top design. Have you utilized any of the functions the split top offers? Is the split top design something you could live without? Have you noticed any cons to having the split top? If you had to do it all over again; would you rather have a single top? Thanks in advance for your input.

  11. Started by dustinsmith,

    I recently put the finishing touches on my Wall-Hanging Cabinet that I built for my wife. I went with curly cherry for the case and ambrosia maple for the accents. I went with the through-dovetails on the case joinery, but covered up my hard work with molding because the wife says "dovetail joints are ugly." Gotta be the first time I've heard anyone say that! I have to say I'm very dissapointed in my ability (or lack thereof) to finish curly cherry. The end product just looks sorta blotchy rather than curly, as I was afraid it would. I used the outdoor oil that Marc used in the Guild build, but I didn't use any blotch control because I knew it would conceal the curl of…

  12. Started by dustinsmith,

    Hi gang, This weekend I finished planing my front and back slabs down to 4" thick. While laying out the cut lines on each end of the slabs with my combination square, I noticed the 4" face of each slab was curved (a very slight bow on both the front and back face of each slab). I'm worried this will come back to haunt me later if I don't fix it now, but my slabs are both already at the exact widths they need to be per plan (7 13/16" and 11 1/16"). If I joint one edge on my jointer, it will of course reduce the width of the slabs. Should I be worried about this? My concern is that if I I don't joint them flat, then I'll never be able to get the end cap dovetails to …

  13. Started by AMarshall,

    I originally posted this on the old Guild Forum, and finally realized that it hadn't made the move. This excel tool will help you to resize your Chest of Drawers if you want to deviate from the published plans. Link: http://thewoodwhisperer.com/files/chest-u-lator-v2.xls Options include: - Equal height drawers, or drawer heights based on a standard increment like Marc used. Manual input also available. - Overall case dimensions can be changed - Up to 10 levels of drawers can be used, and the top 5 levels can be split into 2 drawers like Marc did. Technical note: This spreadsheet uses a macro to redraw the simple diagram included. Excel macros are not supp…

  14. Started by Eric.,

    What do you guys use to lubricate your BC vises? I put some Slipit on mine, and while it's smooth as butta, it's a fairly wet compound and I'm sure as soon as I start making dust and shavings on the bench it'll be all gummed up and schmutzy. Just curious what's been working for you all.

    • 8 replies
    • 10.3k views
  15. Started by matsui,

    Hello! Just registered first time posting, after checking out all the projects and what the guild membership has to offer, this is just the kind of thing I am looking for! I am planning on building the roubo workbench first but I had some questions about the tools that will be needed, I know there are many ways to get things done and some tool lists have been posted but I did not see one for someone building this with hand tools only. So my question what hand tools would get the job done and would I still be able to follow along with out using power tools, I am more then happy to put in the hard work and longer build time it would take with only using hand tools. I a…

    • 10 replies
    • 6k views
  16. Started by Eric.,

    I was so excited to get the finish on my bench, I forgot to put the suede on my leg vise first. So now it's all oily and I'm sure I'll have problems getting adhesives to stick. I'm a little skeptical about sanding back to raw wood because I think the oil probably penetrated so deep that I'd end up with a hollow on the front laminate and/or the inside of the chop. You guys have any ideas? Any kind of glue that may work regardless of the oil? Superglue? Even that would probably struggle to bond, ya think?

    • 5 replies
    • 3.4k views
  17. Started by landslide,

    I replaced the blade on my circular saw to a 60T blade, made the straight edge jig, and cut away... only to realize that the blade wasn't perpendicular to the shoe. Check those tools! Or fail like me...

    • 0 replies
    • 3.7k views
  18. Started by MTC,

    I have made much progress on the bench base - if anyone wants to look at the progress here's a link www.sawdustandwoodchips.com this has been a great build!!!

    • 10 replies
    • 4.1k views
  19. Started by Christopher Ford,

    I was shopping around for Soft Maple here in the Dallas area and I was asked what grade I wanted the wood... I have no idea... =) What do I need to ask for when I shop around at the lumber yards? I figure I'm going to ask for rough and not surfaced since I'll be planing the boards. Thanks in advance for your help!! =)

    • 3 replies
    • 3.4k views
  20. Hey Guys -- Last night I planed down my slab glue ups to final thickness. As a relatively newbie to woodworking, my front slab glue up, which I did first, was not as good as my second glue up, the back slab. When I inspected the slabs after the glue I saw there was some twist in the front slab, but the back slab was pretty straight and good. So I went to work with my #5, which is also new to me, and did the best I could. I then passed the slabs through my planer. Now, the back slab came out just perfect. Everything is square and true and it looks wonderful. But my front slab is not as good. It ended up being slightly skewed, like a parallelogram. Here are some pics of …

    • 2 replies
    • 4.1k views
  21. Started by skiback46,

    I have enough wood thicknessed to glue up the two tops, I still need to joint/rip to 4.25 or whatever my thinnest piece is. But my question is after I've done that, I need to glue them up. I don't have a domino, or biscuit joiner, and can't justify it for this build, I know the domino is infinitely more useful, but still not going to buy it (yet). I also don't want to have visible splines, etc, to help with alignment. In the video mark glues up one slab all at once, even with the aid of dominos, there is some misalignment. I am thinking about gluing up only 2-3 boards at a time, that way I can get them close to parallel. I guess I am wondering if it is worth the…

    • 9 replies
    • 4.2k views
  22. Started by landslide,

    Got an initial glue up done. Here are the results. http://imgur.com/a/9DIOp Should I try and flatten the high spots with a #5 or #7, or just go straight to the planer? I'm getting mixed advice. etienne

      • Like
    • 15 replies
    • 4.6k views
  23. I want to take a few minutes to offer some clarification on what's happening here regarding our lead times and the vises themselves. I am the one responsible for inventory at Benchcrafted, so what I write below, you can be assured of is exactly where things stand here at Benchcrafted. We've been working on a redesign of our handwheels since last October. This includes months of design work, revisions, engineering, and the like. We also have had to make new foundry patterns for both the Tail Vise and Glide Leg Vise handwheels. In order to make this change (and improvement) as seamless and easy as possible for our customers, we've spent lots of time at every step of the …

    • 13 replies
    • 6.9k views
  24. hey all - i'm a beginner woodworker, and while the roubo is a big project, nothing seems super hard. So I took the plunge, researched equipment, waited for the right "big 4" to become available at the right prices. I have those, and I've been learning to use those tools (6" Grizzly Jointer, 12" DeWalt Planer, 10" Delta contractor saw with nice extended surface)., and finally started today with milling the boards for the bench top. However, before jumping right into the the maple boards I bought, I decided it would be best to walk through the process with a relatively cheap 2x4x12 SYP board. I worked as best I could all the way through a "glue up" of 2 boards 96" in len…

  25. Hey Guildies, I finally finished construction on my own split top roubo workbench. Fairly long build for me - about 75 hours total; I think it could have been a little shorter, but with two toddlers, my shop time is limited to 1-2 hours late at night during the week, and 2-3 hours during naptime on the weekend. The stop-and-go really affected my productivity. All that is left is to finish it, and I haven't yet decided which way to go yet. The bench is made mostly from White Ash, sourced from Bell Forest Products - kudos to Boone and team for sending me some very choice lumber. Their prices, including truck shipping to Illinois, were less than our local sawyers,…

      • Like
    • 13 replies
    • 11.2k views

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.