Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

The Wood Whisperer Guild

Building a Wood Whisperer Guild project? Ask questions about the plans, share your progress, and see how other members approached the same build.

  1. Started by Jerry_in_SD,

    Regarding alternate ways to fabricate the arched pulls, I am nearing the completion (installation starts week from Monday) of my Greene and Greene inspired kitchen. I have 15 drawers that needed pulls and I decided that the arched pull looked the best. This was a year ago so I did not have the benefit of Darrell's new book. I did a web search and came across Dorset Custom Furniture blog in which he describes how he fabricated his arched pulls for a G&G inspired sideboard: http://dorsetcustomfurniture.blogspot.com/2008/05/detailed-steps-to-make-greene-and.html The instructions are a little brief but I got the general idea and created a prototype. I…

    • 6 replies
    • 3.6k views
  2. Any tips on how to accurately measure and cut the plywood panel to the correct dimensions to fit perfectly within your mitered frame for the deck (i.e. the alternate version for the deck/bottom)? Have tried laying out the frame and "tracing" the outline on the plywood. Can never cut it to perfect dimension with my track saw. Maybe I just need to accept the small gap b/t the plywood and frame in one of the corners....

  3. Started by Mikejpt,

    Well, winter is almost here and now I'm well into the summer build. This is my take. Chest on chest. Solid cherry (including the back). Platform base. Have not started the drawers. Unfortunately, I've got to stop for Christmas presents. Marc's videos are constant reference and though they don't even look like cousins, the build concept is similar. Because I had to use some new stuff with the old cherry (and a little sapwood) I've decided to dye the piece. Will use General Vintage Cherry Dye. Have run several test pieces and the dye does well over Charles Neils Bloth Control.

  4. Started by AlexPeel,

    Add two pieces of UHM adhesive backed strips to the bottom v-notch on the deadman for really smooth sliding. Also sand the triangular runner attached to the table with progressively higher grits until you get 300+ grit. This will make it much more slick. After doing these things then applying the finish to my table the deadman slides extremely smoothly.

  5. Started by Marco_d,

    Hello all, what would be the smartest way to proceed with the chest build for someone who doesnt have an hvlp system? would pre-staining and pre-finishing before assembly be the best or waiting until its all assembled? Will you be using the peart recipe of 7 parts orange and 4 parts med brown? thanks

    • 3 replies
    • 3.4k views
  6. Started by mmonday,

    Oh no! I just went to the shop to finish some mortises for ebony plugs on the front panel only to find it had cupped...about 1/8". After staring at it for I really don't know how long and feeling myself go red-hot and, I think, swearing, I've pretty much come to the conclusion that I need to start a new panel. I really don't think there is a way to recover this.....but I would like to depend upon the collective knowledge of the woodtalk forum (specifically fellow guild members engaged on the G&G chest) population to, possibly, give me a clue on how to salvage this panel. Any suggestions would be much appreciated.

      • Like
    • 19 replies
    • 3.9k views
  7. Started by woodwhisperer,

    So with all this talk of the blanket chest's depth, it got me thinking. I really don't want to heavily modify Darrell's design but there are certainly things we can do to recuperate the space. So how would you feel about a hidden drawer? I think that would be a fun way to give some functionality to a space that was essentially wasted before. Not only will it be useful, it will be a pretty cool feature of the build. I can't make any promises as Aaron and I are just now batting ideas back and forth, but if I decide to do this, it will most likely be the focus of the video coming up in two weeks. Seems like a creative way to address the depth concern without any vi…

    • 5 replies
    • 3.5k views
  8. Started by alaporte,

    Hey Marc, When did drums become a shop tool? AndyL

      • Like
    • 7 replies
    • 3.4k views
  9. After a weeks delay due to the death of my old Ryobi lunchbox planer. I finally started my glue up today. I'm building out of 7/8" thick cherry. I took a little different approach to the joinery. I figured since I was glueing up 3 boards anyway I may as well make the middle one 7.5" wide and just build the finger joints into the glueup. (less waste and even more grain continuity between the sides of the box ;-)

      • Like
    • 4 replies
    • 3.4k views
  10. Started by Halcon,

    I have decided to build this project. I am in the process of gathering a few things, tools etc. that i don't currently have. Mainly more clamps. Does anyone know how many board feet are in the queen size Dogon bed? Thanks, Tom

    • 7 replies
    • 4.5k views
  11. Started by Charles Clayton,

    I guess I'm a little behind the bench building curve but I started thinking about building a new bench after a building a couple of tables and really struggling with work holding. At one point I screwed a bit of 2x4 to a 2x6, clamped that to a table and then clamped another bit of 2x6 to that to make the "really poor man's" Moxon vice. It worked ok when it wasn't falling apart. The dovetails came out pretty good, considering they were my first hand cut dovetails but you know there's a problem when the hardest part of cutting dovetails is getting the board to stay still. I started thinking about a Roubo style bench after reading a book on bench building by Christoph…

  12. Started by AlexPeel,

    If you are using the Crisscross I wanted to point out that you could actually lower the vise screw hole height to give you more room above the screw. I think the only reason for the original height in the guild plans is to allow clearance for the peg board and mortise at the bottom of the vise chop. According to the Benchcrafted site you can position the screw anywhere in relation to the top of the bench and the crisscross as long as you leave a moderate distance between the screw and the crisscross mortise. Keep in mind with the crisscross you need much longer chop then what is in the original guild plans, especially if you go as low as I have. I decided to go wit…

  13. I just noticed the hinge 60 pound got in rebate 24.99$ (4$ off) http://www.rockler.com/product.cfm?page=22046 Note for canadians, elitetools have the hinges listed but out of stock. No idea if they will ever get stock, so might want to get the Rockler ones. (I sent them an email for a status) http://www.elitetools.ca/en/product/60-inch-pound-lid-stay-torsion-hinge-rustic-bronze-2-per-pack/

    • 2 replies
    • 2.9k views
  14. Started by Eric.,

    I'll be doing the sculpted version of this table since I don't have a lathe. I have a pneumatic die grinder, but my compressor has issues keeping up, it's a bit underpowered, and man I'm so sick of listening to that compressor scream at me. So I need an electric one. I didn't realize they were so expensive...you can get a pretty good angle grinder for about 75 bucks. The cheapest die grinder I could find that isn't an obvious piece of crap is this Makita for $107: http://www.amazon.com/Makita-GD0601-4-Inch-Die-Grinder/dp/B001ASC73E/ref=sr_1_1?ie=UTF8&qid=1366574385&sr=8-1&keywords=makita+die+grinder But it looks HUGE. I'd like something way sma…

      • Like
    • 31 replies
    • 12.4k views
  15. Started by woodwhisperer,

    Just a quick heads up to Guild members and potential Guild members. The Tilt-Top Table project begins May 3rd. Current subscribers will get this project for free. New subscribers must join by May 3rd to get this project as part of their subscription. So if you are on the fence, don't delay. https://thewoodwhispererguild.com/members/projects/tilt-top-table/ http://youtu.be/WCcPGK6D-Nk

  16. Let me start this post by giving a huge thank you to Marc and his minions. This was a great project choice and great instruction along the way. Although I did quite a few things differently than the way Marc did, I did watch every video related to this series probably at least twice and in some cases many more than that. My wife can now recognize Marc on sight. She saw an article by Marc in an issue of Wood Magazine she said “Hey, isn’t that your Woodwhisperer guy? … You know, I think he’s actually sleeping in this photo.” Next let me say that I began this project on January 15, 2012… YES, I DID SAY 2012! It is difficult for me to remember the vast number of projects…

      • Like
    • 15 replies
    • 4.3k views
  17. Started by becht23,

    All, Here is my completed Tilt-Top Table. The wood is from a birch tree that fell in my yard during a storm a number of years back and I finished it with Boiled Linseed Oil.

    • 6 replies
    • 3.7k views
  18. Started by TerryMcK,

    Hey Marc, Just watched the recorded live session on the Youtube link from the Guild site. At the start of the video it was a little choppy even at 320 but I bumped it up to 720 HD and it was clearer but still a little choppy. As it went through it got better though. By the end it was higher quality but still not as good as your own videos. I suppose it must be a limitation of YouTube. I enjoyed the entire session and it was very informative but couldn't make it live this time as it was about 2AM to 3AM in the morning here in the UK. Glad you were able to get it recorded and up so quick. The finished table you showed looked great. Looking forward to the Krenov piece…

    • 3 replies
    • 3.2k views
  19. Started by andreas,

    In Friday's video, Marc mentioned the possibility of splitting the center back slat in half instead of doing a glue up. I liked the idea and decided to give it a try. Here is a photo. Looks pretty darn good in my opinion.

    • 14 replies
    • 6.7k views
  20. Started by AMarshall,

    Marc and I went through a lot of different design options for the Tilt Top Table while we were making the plans. You've probably seen the final two options we published, which are quite different. Marc put up a poll to see which one the community prefers, at this link: http://www.thewoodwhisperer.com/articles/which-table-design-do-you-prefer/ Some of the early comments are suggesting to mix the column from Option 1, with the legs from Option 2. Well, we looked at that combination and I happen to have the file right here. Another one of my favorite options was the "I don't have a lathe or any way to round a column" version. This would just be roughe…

    • 9 replies
    • 4.7k views
  21. Started by storri,

    Situation: I have built the front top section out of 5" T x 1.75" H Hard white maple. The front section has been planed down to approximately 4.75 inches. Problem: When I install the tail vise rails with their shims so that I get the top of the rails at 4.5 inches (1/4 inch below the top) along with the dog plate and the tail vise screw I see that the plate binds during its travel. If I fully extend the dog plate away from the tail vise end (mark it as 0%) and use the tail vise end as 100% then: 0% - < 50% - Easy movement 50% - 65% - Noticibly harder 70% - locks hard I still have about 2 inches of travel left. I thought the dog plate should stop when it hits t…

    • 7 replies
    • 4.3k views
  22. Started by Beechwood Chip,

    On The New Yankee Workshop, the free video this week is a larger table with a similar design to our Tilt Top Table.

  23. Started by Patricio Wise,

    Hi again... My last post was about a "problem" I though I had... It turned out to be trivial... This one, not so much... I got the Benchcrafted kit with the Retro Crisscross leg vise... All was going great, except, in all my excitement and haste, forgot about how the front long rail needs to be a different width and have a different tenon (in comparison to what is shown in the plans or the video) in order for the knockdown joinery to pass behind the crisscross mortise, and routed out the mortises and holes on the leg for the front rail as stipulated in the plans and video. It is no one's but my own fault I know, but I was wondering if there is a convenient way to fix …

    • 2 replies
    • 3.7k views
  24. Started by dodgeram99,

    I know this project is way over. But I just started building this. Marc what size of cove bit did you use? I have seen a 1 7/8 at Rockler. Is this to big?

    • 3 replies
    • 3.5k views
  25. Started by AlexPeel,

    Benchcrafted have released the full install instructions for the crisscross: http://benchcrafted.blogspot.com/2012/12/crisscross-instructions-now-available.html Looks like the chop for the leg vise will need to be different then the original guild plans. Benchcrafted plans call for 19 inches of space for the mortise below the screw plus a couple extra inches. Looks like the new system is going to need a chop thats closer to the total height of the bench, or about 35".

      • Like
    • 15 replies
    • 6.8k views

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.