Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Video shop walk through, post wall going up

Featured Replies

  • Popular Post

Like the title says, a one take no editing walk through of my shop post "wife is over sharing the garage" thread, post "Roubo from scratch" thread. Everything is back in its place although now everything is subject to change again. 

@shaneymack Requested this a bit ago. Also big thanks to @bgreenb, wouldn't be ready for the hardware without him.

questions, comments, concerns welcome, remember the golden rule, if you're going to talk trash about the cowboys, don't.

and preface, while watching, that is not your smoke alarm, it's mine. Maybe @K Cooper can give some fire safety advice.

 

 

Very nice. I am envious. My shop is in the garage as well, 23' x 25', but I gotta share it with 2 cars, which sucks. But not so much on those cold, dark, Alberta winter mornings.

  • Author

Thanks bud. It's nice to have my own space finally. 

 

 I get garaging under those conditions.  The coldest I ever see is 40° at night.  

Very nice space you have there Brendon. Your bench looks great. I didn't realize you had the top on already. I guess I missed part of the build. Need to go back and catch up.

I like the space Brendon and it will become a home for your creativity. There seems to be some sort of coffin theme going on with the chop and deadman.

I thought you had a big unlit ante room at first until you mentioned the garage door was open and a car went by! Too cold to have the door open here.

Painting does suck and I got my stepdad and his buddy to paint my interior walls for me (at cost) but it does help reflect the light. It goes light brown in time due to dust though. 

Hopefully your hardware for the bench comes soon.

 

It's warming up here in my area of England today 7°C going down to -2°C overnight (or 44°F down to 28° F as you are in inches! ;) )

Brendon, you've come a long ways from the time you posted the stud only partition wall pic. The shop looks great. I too have most every tool on casters and often times find some of mine on the driveway when I need the extra room. Loops like a fine place to hang out now. Thanks for sharing. Oh, did not see a fire extinguisher in there?

Nice shop, Brandon. I too am trying to figure out where to put my stuff. I am working on some cabinets and when they are done, it will be time for a big shop reorganization. I envy you your wall space.

  • Author
15 minutes ago, Immortan D said:

Nice shop. Send that freezer to the laundry room ha!

 

That was a tactical decision. I told her the freezer should be on her side.  She said "ok,  move the gun safes into yours. ."

I see. Then wheels for the freezer it is so you can move it towards the doors when you need more space to work on your bench.

 

Thanks for the video Brendon.  Get rid of the golf sticks and move the freezer to that corner.  I have the freezer piece in my puzzle also, still haven't solved it to any satisfaction.  I think I spend part of every shop session staring at it trying to get it to disappear.

  • Author

I seriously can't get rid of the stupid ball hitting sticks. I'd love to but some people still believe business can only be done on a golf course. Drives me nuts. 

Once I move the light switch over,  I'll have plenty of room to use the bench properly.

Nice tour, love seeing other shops. I agree it might be worth moving the freezer to the 'stuff corner', or maybe swapping the bench with "your baby"...either way would give you a lot more room around the bench. Also glad to see you've got the bandsaw up and running again.

  • Author
8 hours ago, davewyo said:

Very nice space you have there Brendon. Your bench looks great. I didn't realize you had the top on already. I guess I missed part of the build. Need to go back and catch up.

Yeah Dave, I constructed it out of typical order.  Tops glued, legs, top flat, base assembled,  Deadman/chop shaped,  should be flattening today and starting finishing tomorrow. 

Brendon, what are you going to finish the bench with? I like Chet's idea about putting the freezer where the clubs are. Then relocating the router table, since it's on casters, to where the freezer is.

  • Author

Unfortunately, the lady friend says the freezer needs to stay by the door.  The kids often run out there to grab a popsicle, mini pizza and such so she doesn't want them to have to walk through the shops dusty floor across the shop to get there then track it all back in across the dark wood floors. 

1 hour ago, K Cooper said:

Brendon, what are you going to finish the bench with?

I settled on watco teak oil purely on color! I tested a few light oils and that's the one that didn't make me feel like I built with yellowheart.  I have no misconceptions about it being actual teak oil, i know it isn't but It will provide some protection, turn the blonde wood the least yellow, make the grain and figure pop a bit and be relatively easy to redo.

How many coats and how long between applications?

  • Author

Honestly coop, I haven't tested extensively.  

My tester boards were not a heavy coat and wipe back.  It was more dampen the rag and rub it in until I felt the rag needed more.  Zero standing oil at any time.  Waited  about 18 hours between first and final coats on the testers. I will proabably keep with this on the back legs and shelf boards of the actual bench first to make sure it acts the same. 

Hey Buddy ! Thanks for the tour, the space is looking great ! You bench looks really good. Sucks thats its stuck to the side like that but I guess you do what you gotta do!  Im surprised by how much space you still have after partitioning it off. How big is the entire garage without the partition? Also curious, how high are your ceilings? How far into the future are you thinking about putting a ducted duct collection system? The snap on box is ridiculous man, im sure that box with its contents is worth more than my entire shop !!!!

  • Author

Very welcome,  now time for a tour of your igloo.

The laundry room is  2.61m deep now,  same width as the garage.  Ceiling is 2.71m high.

Being that the garage door goes up and down, it will be interesting for the duct work. The dc is about to get a cyclone and vented outside. In my head, I have a good idea how the runs would go (realistically a few bad ideas I'm sure) but haven't put brain to paper and design yet. 

Very welcome,  not time for a tour of your igloo.

The laundry room is  2.61m deep now,  same width as the garage.  Ceiling is 2.71m high.

Being that the garage door goes up and down, it will be interesting for the duct work. The dc is about to get a cyclone and vented outside. In my head, I have a good idea how the runs would go (realistically a few bad ideas I'm sure) but haven't put brain to paper and design yet. 

What's an m? [emoji12]

Sent from my SM-N910W8 using Tapatalk

  • Author

It stands for mo-fo's. One could conceivably stack 2.7 mofos high in the garage.

so much for being culturally sensitive. ; )

Can the freezer move to your basement?  That's where mine went, with the help of three buddies and 12 beers

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.