Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Exterior door

Featured Replies

  • Popular Post

I started a door a little bit ago. Sorry it isn't more step by step. I want to share but also have deadlines. I started by making the styles and rails. I made them stave core style. They are the same as the last doors I posted about. Here is what that looked like. I decided to take the easy domino route because I already made 14 interior doors and didn't feel like making them traditionally. 27b68a9c5cfc233fe742e626f0983ce6.jpg

After that I started making the panel for the bottom. c5b749a02b04af25a88cfb035d402633.jpg got everything glued up and almost punched myself in the face. Wasn't thinking about it being an exterior door and used titebond original. The thickness was about 1/16 larger than it needed to be. I had a long talk to myself about doing things not because they were easy but because they were right. I then ripped the panel back down to strips. This time I had to use dominos because I couldn't lose any thickness. d5edc2899a180f4fb8857023147739f2.jpg Just cost me a couple hours of work but better than years of wondering if the glue failed. After that I started making the grooves in the panel. I decided to cut the groves after the glue up. It doesn't matter which way you do it I just wanted more control over the depth of the groves so I cut them after the panel was glued up. First I needed to come up with a jig to cut the groves so I made one using my track saw. 866d0d4e0cd8f90a81528e5eb75a0305.jpgd8cf41a6a8b1a87ddd5e5381eb0029e5.jpg worked beautifully. 6dd4b8a3588909bc2948d1c2a7e6f8dd.jpg I cut the dados in the rails and the rabbits to fit in them. They were stoped dados. I made my second mistake by putting the domino to close to the dado. Not worried about it though. 84a2e0a5fb73d35b8233c7ffed6aaebb.jpg cut it close then cleaned everything up with planes. #hybridwoodworking ! a766076467a4c765df786ccb6414a819.jpg Did a test fit. c599ff60e308ae77238f321709aa6138.jpg everything looks good. On to the next part. I am making stained glass for the top. I have never done this before but excited to try something new. Here is the design. 143d041e52b3502b425adbd0e96d18a5.jpg to be continued!

  • Replies 64
  • Views 14.1k
  • Created
  • Last Reply

Top Posters In This Topic

Most Popular Posts

  • bradpotts
    bradpotts

    Got started today. Made sure everything was marked and lasted out. My first cut was a long piece. It broke in the middle. Lesson learned. Next cut was better. Then started to put it together. Every

  • bradpotts
    bradpotts

    Finally got this finished and installed. Sorry about the pictures. Not the best quality.

  • bradpotts
    bradpotts

    I started a door a little bit ago. Sorry it isn't more step by step. I want to share but also have deadlines. I started by making the styles and rails. I made them stave core style. They are the same

Posted Images

Looks great...except for that can of Coors Light. Work like that deserves a good beer!

 

 

Sent from my iPad using Tapatalk Pro

  • Author
  • Popular Post
Looks great...except for that can of Coors Light. Work like that deserves a good beer!

 

 

Sent from my iPad using Tapatalk Pro

Ha ha I can't afford anything better.

Looks like nice clean work, Brad. That's an attractive door.

Do you have your own one person business, or are you part of a bigger production shop?

I'm really looking forward to what you do with the stained glass. If you can, give us lots of detail on your technique.:)

 

Looks good man.  I've always wanted to learn stained glass.  Glass is cool.

  • Author
Looks like nice clean work, Brad. That's an attractive door.

Do you have your own one person business, or are you part of a bigger production shop?

I'm really looking forward to what you do with the stained glass. If you can, give us lots of detail on your technique.[emoji4]

 

It is just a one man shop. I wouldn't trust anyone else enough to help me.

I will let you know how I do it, but hopefully it is not bad advice since I don't know what I am doing.

Just now, bradpotts said:

It is just a one man shop. I wouldn't trust anyone else enough to help me.

I will let you know how I do it, but hopefully it is not bad advice since I don't know what I am doing.

Sounds good to me! :)You have developed a super nice pattern to start with.

A helper to sweep, sand and hold the other end up does come in handy. You let them work on unseen faces and joints before they ever touch the visible work. 

Very nice looking door so far ! I've only done a tiny bit of stained glass, but my mother and sister did some beautiful pieces.

I like clear Lexcel caulk between glass and wood. It remains flexible, cleans up with mineral spirits and prevents any rattle. Far better stuff than silicone.

  • Author
A helper to sweep, sand and hold the other end up does come in handy. You let them work on unseen faces and joints before they ever touch the visible work. 

Very nice looking door so far ! I've only done a tiny bit of stained glass, but my mother and sister did some beautiful pieces.

I like clear Lexcel caulk between glass and wood. It remains flexible, cleans up with mineral spirits and prevents any rattle. Far better stuff than silicone.

Thanks! I will have to look into the lexcel.

On 5/19/2017 at 8:06 PM, bradpotts said:

. I had a long talk to myself about doing things not because they were easy but because they were right.

An attitude that is becoming rarer by the day.  Good on you for doing the right thing.  Many (most?) people would've just kept pushing forward and hoping for the best.

I always enjoy your builds, brad.  Looking forward to seeing the finished product here.

Interesting project, to say the least.  We have an exterior door from the basement to the driveway.  It looks crappy and the previous owners seemed to break a pane to get inside-  put a piece of glass i n and used about four pounds of caulk instead of the wood trim to hold the glass.  Often thought of building a door to replace it.  Thanks and will review your thread and photos for reference.

  • Author

Got everything I think I need to start. I made the boarder to make sure everything stayed square. Included are: glass cutter, cutting oil, solder, running pliers, lead shears, and lead nippers. b32b3e8db5b04139b3f29779b66afdbd.jpg the gladd661d7f4991e9feee45b0581d6ed71ac5.jpg the color looks different in the light. 2ccde085914cf8b3cb0cb77f0ce4b133.jpga2616a6f63e80e85480596b5a8ed66cc.jpg and the lead and I think it is zink? Boarder. 3d0155a87aac24d3663e1d924601552c.jpg I guess the lead needs to be stretched. The lady at the glass store did it for me. It was basically putting it in a clamp and pulling on it.

very nice Brad, +1 to everyone thats wanted to do stained glass, it's always something i've wanted to try.

I used to do a ton of stained glass, and it looks like you are on your way.  I am a little concerned with using lead in an exterior door.  With lead there will be gaps between the glass and lead and depending on how well the door is protected  your Colorado weather might be a problem.   If its not too late look into copper foil.  Using copper the joints are sealed with solder. The downsides to copper are, your cuts have to be more accurate, it will change your overall dimensions (lead vs copper foil), it is slightly more time consuming, and you will use a LOT of solder.

 

  • Author
I used to do a ton of stained glass, and it looks like you are on your way.  I am a little concerned with using lead in an exterior door.  With lead there will be gaps between the glass and lead and depending on how well the door is protected  your Colorado weather might be a problem.   If its not too late look into copper foil.  Using copper the joints are sealed with solder. The downsides to copper are, your cuts have to be more accurate, it will change your overall dimensions (lead vs copper foil), it is slightly more time consuming, and you will use a LOT of solder.

 

The stained glass is going to be sandwiched between two regular pieces of glass.

7 hours ago, bradpotts said:

The stained glass is going to be sandwiched between two regular pieces of glass.

Got it, should have thought of that before typing.  I have never done that, will condensation between the panes be a problem?  

  • Author
  • Popular Post

Got started today. Made sure everything was marked and lasted out. d576748f93668cc92022a3a6aaf763f0.jpg My first cut was a long piece. It broke in the middle. Lesson learned. 4298d0366bd3fc26e4c512492b110ad0.jpg Next cut was better. c1c397cd0c86c3dfc435cd86f4f84ba3.jpg Then started to put it together. Everything running smoothly so far. 5ac720fa976f8f63f39348a9fdd121d4.jpg8433c1156c5fd11f3e670caf47389ba6.jpg More tomorrow!

Very cool, Brad ! That stained glass is going to look amazing !

 

Sent from my SM-N910W8 using Tapatalk

 

 

The door would have been very cool. Adding the shop made stained glass is going to kick it into a totally different level of awesome. 

I really like that though out your builds, it seems like you are constantly pushing yourself and trying new and interesting things. Keep it up Brad.

Looks awesome.  I'm gonna have to go ahead and ask you to drop everything and finish that stained glass ASAP so I can see the finished product.  Ok?

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.