Popular Post difalkner Posted May 22, 2017 Popular Post Report Posted May 22, 2017 My plan was to cut a piece of a Cherry log to make some signs on the CNC. I cut two pieces before disaster struck and it was all my fault. I'll tell you before you watch this that it isn't pretty but this video is not gory, no blood. But a Laguna 1" Resaw King blade was destroyed in the process. This is my Public Service Announcement for 2017 - don't do what I did. David 5 Quote
drzaius Posted May 22, 2017 Report Posted May 22, 2017 Wow David! Even at 1/10 speed that thing looks like is spinning a million miles an hour. I nearly pooped my pants just watching it. Not having much band saw experience, I can't offer any advise or suggestions, but thanks for posting this. I've certainly learned a thing or two from it. 1 Quote
Coop Posted May 22, 2017 Report Posted May 22, 2017 I'm glad for your sake there was NO blood and gory! I'm watching this from my shop with a big fan going and could not hear the audio and could not understand how it happened until you slowed it down. Would never have thought about that happening. Thanks for saving a lot of our blades and fingers and hands by posting. 1 Quote
TerryMcK Posted May 22, 2017 Report Posted May 22, 2017 Thanks for posting that David and glad you still have your limbs. Very scary stuff. 1 Quote
wtnhighlander Posted May 22, 2017 Report Posted May 22, 2017 I'm not entirely clear on what happened. Did the blade simply catch in the wood and spin the piece, or did you find a piece of metal? I saw a spark where things went off the rails. Quote
Keggers Posted May 22, 2017 Report Posted May 22, 2017 That is too scary! I'm glad you were not hurt. Blades are cheap in comparison to losing a finger. A good lesson learned. I'm very happy you still have all your fingers. Great guitar playing by the way. 1 Quote
difalkner Posted May 22, 2017 Author Report Posted May 22, 2017 41 minutes ago, wtnhighlander said: I'm not entirely clear on what happened. Did the blade simply catch in the wood and spin the piece, or did you find a piece of metal? I saw a spark where things went off the rails. The blade is applying a constant downward force and there was nothing to support the leading portion of the log. It should have been in a V-shaped cradle to support both the leading and trailing surfaces of the log. Because I was not holding it down, and slightly relaxed my grip, the downward force of the blade exceeded the pressure I was using to hold it in place and spun the log. Once it started spinning it was no longer cutting in the same kerf it had started but rather trying to cut a new kerf but nothing is holding the log in place at this point. Does that help? The sparks are from the blade hitting the ceramic guides, also very expensive, but they appear to be ok at this point. David 2 Quote
Guest Posted May 22, 2017 Report Posted May 22, 2017 it also looks like you stalled or backed out of the cut right before it exploded. But yes, I agree, it was not sufficiently secured. Quote
Eric. Posted May 22, 2017 Report Posted May 22, 2017 I know what happened before even clicking on the video...and I just can't watch it. I did the same thing once when I was a bandsaw greenhorn. Turned my pink panties brown. Bandsaws are pretty safe machines...but they're not impervious to user error. Good lesson to learn. Thanks for posting it, difalkner, at the expense of your pride. It's valuable information. 1 Quote
Popular Post Marmotjr Posted May 22, 2017 Popular Post Report Posted May 22, 2017 As a turner, I've learned this one the hard way too, but nothing that big. Round things don't like bandsaws. 3 Quote
difalkner Posted May 22, 2017 Author Report Posted May 22, 2017 52 minutes ago, Mike. said: it also looks like you stalled or backed out of the cut right before it exploded. But yes, I agree, it was not sufficiently secured. What I actually did, and you can see in the video, is that I regripped with my left hand on the sled and that caused a slight relaxation of my grip on the piece of Cherry. That's when everything went south. In retrospect and Monday morning quarterbacking, even with this poor setup if my right hand had been on top and pressing down one of two things would have happened - 1) the piece would have been cut with no issue like the first two, and 2) my hand would have been pulled into the blade. I like option #1 better. Quote
Tom Cancelleri Posted May 22, 2017 Report Posted May 22, 2017 I knew what happened before watching this. I did something similar a long time ago. It's scary as could be. Glad you're ok. Sent from my Nexus 6P using Tapatalk 1 Quote
Pwk5017 Posted May 22, 2017 Report Posted May 22, 2017 even though i knew what was coming when i saw the round log, it still scared the shit out of me when it happened. I actually jumped at my desk. Oddly enough, this exact scenario is usually detailed in every bandsaw manual. I will be honest, ive scoffed at the illustrations before, but this is a much better reminder of why things need to be supported and secured. Never cut round logs on my bandsaw before. 1 Quote
mat60 Posted May 22, 2017 Report Posted May 22, 2017 Thats something that can change the amount of respect one has for a bandsaw. Glad your ok. 1 Quote
Mike Vee Posted May 22, 2017 Report Posted May 22, 2017 thanks to this video, I had a nightmare about losing my hands all night... I'm still terrified lol but it's very educational. Sent from my SM-G930F using Tapatalk 1 Quote
wtnhighlander Posted May 22, 2017 Report Posted May 22, 2017 Thanks for the explaination...and I'm jealous of your instrumental abilities! Glad your digits remained intact! 1 Quote
prov163 Posted May 23, 2017 Report Posted May 23, 2017 Glad you weren't hurt. We do tend to think of bandsaws of being much safer than table saws, and they are, but that doesn't mean there is no danger lurking. Thanks for sharing! 1 Quote
Jim DaddyO Posted May 24, 2017 Report Posted May 24, 2017 Thank you so much for posting this. Better to learn from others than to find that one out first hand. I don't have a band saw (yet) but I hope this one has burned into my memory. 1 Quote
Tom King Posted May 26, 2017 Report Posted May 26, 2017 After reading this, I'm pretty sure that's the reason I ended up getting the 24" Centauro so cheap. It had a kinked blade off the wheels inside it. I thought when I bought it that I might need to replace the bearings in the wheels, but the price was so cheap that it was still worth it. Turned out, it didn't need much of anything. I think it probably scared the seller into deciding that he didn't really need a bandsaw. 1 Quote
pkinneb Posted May 29, 2017 Report Posted May 29, 2017 Well its probably better to not have these incidents happen but if they do, having a video that can remind the rest of us as well is a good thing! Thanks for sharing. 2 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.