Recommended Posts

Posted

I hope the dirt stays in that ditch with all that rain.  I ran a ditch straight down the hill last Spring to a hydrant.  We've had two big rains (not that big) this Summer that washed every bit of dirt out of that ditch both times.  The pipe was left cleaner than when I put it in the ditch.  Nothing to do but try again.  At least I have a loader to move the dirt with and drag the washed downhill dirt back up the hill.  It might not stay in there until the weather turns enough to put some fast sprouting Rye grass seeds on it.

  • Like 1
Posted
On 9/24/2024 at 10:29 PM, gee-dub said:

I am still getting soooo little done per day it is really frustrating.  I have never been much good at setting still.  I don't want to be operating machines when I am fatigued and after an hour or two of time in the shop I'm done in. Still getting better every day but the recovery curve is a lot longer than I would have ever thought :angry:.  On a positive note I actually got some things done yesterday and today so whoo-hoo! ;)

Echoing this, the tail from my covid is still keeping me out of the shop. By the time I'm getting my other stuff done, I'm just not up for power tools and sharp implements yet.

  • Like 2
Posted
On 9/28/2024 at 5:27 PM, JohnG said:

We almost got very lucky with this tree falling in the storm. 
IMG_6152.thumb.jpeg.a01f88bb2f20aee023223d3bb591ebf1.jpegIMG_6151.thumb.jpeg.858a87059948e295b412891cc6537b4d.jpeg
 

I dropped about a dozen trees today that were dangerously leaning or hung up on other trees in the woods that my kids play in. 

So, I'm guessing that solar panel is toast.  I never thought about the potential for storm damage to solar panels.  Does loosing that panel disable your array? Can it be replaced with the same or a similar model?  

Posted

Seeking some log milling advice...

I went out and visited a friend today who had a number of trees taken down and is having someone with a Wood Mizer show up next week to mill them. The image below is a hickory tree he doesn't have a use for and so I've got the opportunity to get a section of it to build a workbench. For scale, we measured it about 26" in diameter inside the bark and over 25 feet of nice long straight trunk before it gets branches.

I don't have much storage, so am trying just to get just what lumber I need (which includes some extra for surfacing and "stuff happens"). Whatever I don't want, the thought is he'll leave as a log until he has a use for it, so I need to come up with my "milling order" while we've got the Wood Mizer on site and it needs to be in terms of a length of the tree and not individual boards. In other words, I get N feet of the tree cut off and milled, and I have to haul that away - he doesn't have the space either to make a bunch of lumber that I get to pick and choose from.

I'm using Marc's Hybrid/Roubo workbench plans which require 75 BF of 8/4 Hardwood Lumber plus 4BF of 4/4 Lumber minimum. I'm thinking one 8' section of this tree, slabbed 2" thick with one 4" thick slab for the legs. I found Doyle's Log Rule which gives me well over 200 BF for an 8' section of 26" diameter tree. But I'm hoping someone can sanity check me as I have no real idea how much waste to expect. 

I think my real question is: how confident should I be one 8' section of the tree be enough for the bench?

Secondary question - how thick should I actually have the slabs cut to yield 2" boards? 2 1/4"? 2 1/2"?

Thanks in advance.

PXL_20241004_154445504.thumb.jpg.f5767f0461cac1391f7f124245febf7a.jpg

Posted

Cut twice as much as you need and get him to reverse roll quarter saw it (easier than regular quartering but still get quartered lumber), which will probably cost you more but will increase your chances of getting useable wood.  After that I'd pay someone who knows what they're doing to kiln dry it.

Without doing those things, I'd just consider it firewood.   From what I know there is a fair amount of loss from drying, especially air drying, Hickory so if you only cut what you need on the list, chances of getting enough to do your job will not be good.

You don't see a lot of Hickory lumber for sale because getting it to a marketable state is not always a winning proposition.   It makes really good firewood.

  • Like 1

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.