Popular Post gee-dub Posted September 6, 2024 Popular Post Report Posted September 6, 2024 Got some abrasive cleaning sticks. I haven't had to buy any for many years but the current ones were getting a little short to handle. Peachtree had these on sale at a good price. 5 Quote
legenddc Posted September 6, 2024 Report Posted September 6, 2024 On 9/5/2024 at 10:35 PM, Coop said: You’re gonna love it! Money well spent. Mine was a bit intimidating at first but smooth as butta now. Thanks. I wasn’t looking to buy one. Marc posted in the Woodwhisperer Facebook group someone listed tools in the Guild community so I took a look. $530 shipped was too good of a deal to pass up. I wasn’t expecting the additional cutters. Now I need to figure out what size Dominos to order initially. Will probably make them at some point but want to start off with using the real thing first. 2 Quote
Popular Post Botch Posted September 6, 2024 Popular Post Report Posted September 6, 2024 Made some pies: 8 Quote
Popular Post Coop Posted September 8, 2024 Popular Post Report Posted September 8, 2024 On 9/6/2024 at 1:41 PM, Botch said: Made some pies: 5 Quote
Beechwood Chip Posted September 8, 2024 Report Posted September 8, 2024 Just replaced my car battery. Any opinions on battery terminal grease? Instructions said to grease the terminals with bespoke grease before connecting the cables. I don't have any specially formulated battery terminal grease on hand. I figure it's better to clamp the cables on dry for a good clean contact, then maybe grease everything to keep air/moisture out. And it's probably OK to use any sort of grease that won't run off when it gets hot. Or maybe the grease is to help get the cables off? What do you guys do? Quote
JohnG Posted September 8, 2024 Report Posted September 8, 2024 Collected more firewood from my neighbor’s property. 1 Quote
Coop Posted September 8, 2024 Report Posted September 8, 2024 BC, I just use a light coat of white lithium grease. Or a coat of silicone grease. I apply it after connecting the cables to the dry post. Maybe I should apply it to the post but don’t. 1 Quote
Popular Post roughsawn Posted September 8, 2024 Popular Post Report Posted September 8, 2024 BC, after you clamp the cables to the posts, a quick shot of battery terminal protector spray(aerosol) will give excellent protection for an extended time. I have used it for 30 years or more. If the posts and clamps are clean, you will not get corrosion. Or, you can wipe on dielectric grease. It's made for protection electronics. JohnG, I see some nice crotch figure in that last pic of the big base...lol 3 Quote
Botch Posted September 8, 2024 Report Posted September 8, 2024 On 9/8/2024 at 1:04 PM, Beechwood Chip said: Just replaced my car battery. Any opinions on battery terminal grease? Instructions said to grease the terminals with bespoke grease before connecting the cables. I don't have any specially formulated battery terminal grease on hand. I figure it's better to clamp the cables on dry for a good clean contact, then maybe grease everything to keep air/moisture out. And it's probably OK to use any sort of grease that won't run off when it gets hot. Or maybe the grease is to help get the cables off? What do you guys do? Dad always taught me to use Vaseline on the post before attaching the cable; I thought it sounded like an insulator but it always worked. Nowadays I use those impregnated felt washers, clean and no corrosion. Oh, and know what cleans corrosion off a battery post better than anything? Coca-Cola! (some people even drink that stuff!) 2 Quote
Tpt life Posted September 9, 2024 Report Posted September 9, 2024 Never needed anything other than hot water. Save the Coke for the bush/trail. Quote
Popular Post pkinneb Posted September 9, 2024 Popular Post Report Posted September 9, 2024 Finished the sackback chair. 13 Quote
gee-dub Posted September 9, 2024 Report Posted September 9, 2024 Still watching the smoke from the Line Fire in SanBo. Started on the 5th and is still going. About 10 miles away as the crow flies but the smoke and air quality are enough to keep you indoors. @pkinneb - Love the chair. That thing is beautiful! Did you do a thread on the finish and I just missed it? 1 1 Quote
gee-dub Posted September 9, 2024 Report Posted September 9, 2024 Well poop. I just went out to look to the northeast and see how the Line Fire smoke cloud was doing and I see a fire in our own hills about 1 mile away to the southwest. 8 Quote
Ronn W Posted September 9, 2024 Report Posted September 9, 2024 Sure hope the wind is in your favor. 2 Quote
Botch Posted September 10, 2024 Report Posted September 10, 2024 Stay safe, Gee-Dub. Those damn close calls can now cancel any homeowners insurance you may have had, for years. I'm fearing the same myself (and look up such flood/fire-prone areas like Marshalltown, IA...). Quote
JohnG Posted September 10, 2024 Report Posted September 10, 2024 On 9/9/2024 at 6:26 PM, gee-dub said: Still watching the smoke from the Line Fire in SanBo. Started on the 5th and is still going. About 10 miles away as the crow flies but the smoke and air quality are enough to keep you indoors. Yikes, that’s really close to where we used to live. Quote
Popular Post Von Posted September 10, 2024 Popular Post Report Posted September 10, 2024 Finally finished five days of covid isolation and feeling about 90%. Fortunately it looks like I managed to avoid sharing it with the wife (who as a wonderful caregiver). Still feeling a bit foggy and expect it will be a couple days before I play with power tools. 4 1 Quote
legenddc Posted September 10, 2024 Report Posted September 10, 2024 Coop - stay safe. I hope they get control of that fire soon. Von - Glad to hear you're feeling a lot better and your wife has avoided it so far. 1 Quote
Popular Post gee-dub Posted September 10, 2024 Popular Post Report Posted September 10, 2024 On 9/9/2024 at 4:29 PM, Ronn W said: Sure hope the wind is in your favor. All is well. 4 1 Quote
Chestnut Posted September 12, 2024 Report Posted September 12, 2024 On 9/6/2024 at 6:09 AM, legenddc said: Now I need to figure out what size Dominos to order initially. Will probably make them at some point but want to start off with using the real thing first. 6mm & 8mm are my most used. 2 Quote
legenddc Posted September 12, 2024 Report Posted September 12, 2024 On 9/12/2024 at 9:14 AM, Chestnut said: 6mm & 8mm are my most used. Thanks! Trying to figure it out on the internet was fun. Everyone has their own theory. Right in the manual it says used 8mm for 3/4 material. I had already ordered 5mm and 8mm Dominos. Will make my own if I need. Quote
BillyJack Posted September 12, 2024 Report Posted September 12, 2024 Guess I’m accidentally pissing people off on Woodworkingtalk. Not trying to. Just voicing an opinion. woodworking forums are so screwed up. 54·a moment ago John Smith_inFL said: Yes, hobbyist shops . . . . that's what we are here, hobbyists. We are not on the commercial sales and production level. Im just sharijg my hobby back ground.. “A forum community dedicated to professional woodworkers and enthusiasts” So are you saying the forum only dedicated to the hobbyist? Im not allowed to share real world experience. I was a skilled woodworker who was payed for 37 years and a hobby woodworker longer. Not if this matters I guess… Reply Quote 1 Quote
BillyJack Posted September 12, 2024 Report Posted September 12, 2024 Comment I made.. They have some unique equipment, but to me they entertain the hobbyist.Track saws and Dominos are finding there way In shops. ”but to me” I thought was obvious.. I think the moderators want 100% control without highly skilled people voicing their opinions that disagree with the hobbyist. There are so few pros/skilled woodworkers on forums we are almost extinct.. 1 Quote
legenddc Posted September 12, 2024 Report Posted September 12, 2024 Shouldn't you be on a roof instead of commenting on woodworking forums? I love watching YouTube videos or reading about production shops. It's such a totally different way of woodworking, at times, compared to a hobbyist. Quote
BillyJack Posted September 12, 2024 Report Posted September 12, 2024 Shouldn't you be on a roof instead of commenting on woodworking forums? ??? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.