Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Blowing Tree Mantel

Featured Replies

  • Popular Post

This is a mantel that I made for a client. The inspiration was a tree blowing in the wind. This build was a lot more complicated than it looks. From the outside it looks like it is just two boards jointed together. The problem is that they are both end grain. It is actually a veneer on top of a whole board.  The woods that were used are walnut, maple and curly maple. The inlay had some ebony in it. I used ARS for the first time on this piece. I like to try different finishes on different pieces. I did like that the ARS didn't discolor the wood. I was very disappointed in the work-ability of the finish though. It appeared to me that it was very similar to oil based poly. Hopefully Eric will not delete this thread :) I never really know what to say... Let me know if you have any questions. 

IMG_1487.JPG

DSC_0492.jpg

DSC_0485.jpg

DSC_0535.jpg

DSC_0608.jpg

Awesome job man!

Sometimes I'll thin ARS a little, especially on the last coat.  The key is to not overwork the finish...lay down a thin, consistent coat with a light, steady pass...move on.  Don't keep going back and forth, back and forth...that will create a sticky, streaky mess.

  • Author

Thanks guys!

Awesome job man!

Sometimes I'll thin ARS a little, especially on the last coat.  The key is to not overwork the finish...lay down a thin, consistent coat with a light, steady pass...move on.  Don't keep going back and forth, back and forth...that will create a sticky, streaky mess.

I did thin the last coat as well. That did help. My problem was with laying down an even coat.

That is really cool Brad. As always, fantastic creation! Only downside, no journal!

  • Author
Wow, that is really awesome, how did you secure it to the fireplace?

On the back side I inserted a 1/8 by 3" metal strip. I drilled some 5/8 holes and used concrete fasteners.

Wow, that is a beautiful design and very clean execution. I like it! :)

Wow.  Projects like this one make me realize just how far I still have to go.  Perfect execution and wonderful design!

  • Author

Thanks again for all the nice comments. What is this I hear about the possibility of Marc moving to Colorado? If he does maybe we could build something together, or just talking to him in person would be cool too.

Beautiful work.  I am sure you clients are thrilled  

ARS is oil based poly, hence the similarity :) 

whoa!  Really cool!  I like that it opens, too - though I can't see that happening much with all the junk that ends up on our mantle!

  • 2 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.