Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Twisted Leg Sofa Table

Featured Replies

  • Popular Post

I started some rough cutting today.  This one will take awhile,  the big challenge for me will be the legs and those will be the first step. Here's the sketch.  With my engineering background I also have a full blown fully dimensioned plan but the dimensions seldom survive unchanged for very long.  Base will be walnut and the shelves will be birdseye or curly maple if I can find any.  The shelves will have bevelled edges instead or round overs.

 

twist 2 arch.JPG

Since I ended up with a 10' x 7 1/2" piece of 8/4. I decided to try to get the aprons (3/4" thick) out of the 8/4 by resawing and save as much of the 4/4as I can for another project.

P1010006.JPG

Will get 4  1 1/2" square legs out of this piece.  Flatening one side - finish with plane - then to planar, then let it sit for a day or so.

 

P1010007.JPG

P1010008.JPG

Might as well rough cut the rest while I waiting.

  • Replies 90
  • Views 18.2k
  • Created
  • Last Reply

Top Posters In This Topic

Most Popular Posts

  • First twisted leg done, sanded, bare wood. About 6 hours to do the twist.  I am getting more efficient, tho,   I absolutely love the miniature ebony spoke shave.  It is easy to control around the twis

  • I started some rough cutting today.  This one will take awhile,  the big challenge for me will be the legs and those will be the first step. Here's the sketch.  With my engineering background I also h

  • Project Complete.  Done for the new year - Not that means anything.  Finished with finishing 2 days ago. Assembled today. Marking and drilling holes for cleats.  Do not drill too deep.

Posted Images

Can't wait to see how this comes out, should do a journal on just the jig or how ever you're gonna do the legs, that seems like a daunting task haha

  • Author

Yep,  I have one more side of a practice leg to do before I try the real thing.  It will be done unplugged.

This looks like a really cool project, Ronn. I look forward to seeing it come together. 

I look forward to seeing how you make the legs they are a cool design. Fwiw you may want to give Bell Forest a try on the maple I have gotten some awesome figure from them both curly and Birdseye. 

Really like the curved aprons and the floating top but I really can't wait to see the twisties and how they are made!

Sent from my SM-G920W8 using Tapatalk

So here's our stack of BE, Ronn. As you can see, it's a mixed bag, some fantastic and some mediocre with either light figure or heavy heartwood.

21bea09ac51daa21a19850f1098d563f.jpg

ab5fa53edc30fe374e337ff31fa35fc3.jpg

b8b334038412d5185503b702db8c87db.jpg

And here's a bonus pic of goat sack because my fat fingers added it accidentally and it's more fun to keep it than delete it.

a77aa2d213ac267c012cc2b35bf66027.jpg

Sent from my SCH-I545 using Tapatalk

I was going to pass on this one until I saw goat sack. Count me in now.

Sent from my iPhone using Tapatalk

This looks like it's going to turn out awesome Ron. Have you done a test leg yet, or is that what you said your working on now?

  • Author
10 hours ago, Eric. said:

So here's our stack of BE, Ronn. As you can see, it's a mixed bag, some fantastic and some mediocre with either light figure or heavy heartwood.

Eric,  Thanks so much.  I stumbled across 2 wide curly maple boards today at woodcraft for $4.50 / BF.  could pass that up. 

However, now I have a dilemma........I had planned to make the table 44" x 14" (no other other furniture in room in unknown).  I can get 11 3/4" width max out of the boards I bought. My options are:

1. Redesign for 44" x 11 3/4"

2.  Rip the boards and make top and lower shelves out of two 7" boards.  I am afraid that the joint will be too visible since the figuring would looked "chopped off" on each side of the glue joint.

3. Rip the boards to about 11" wide and put a 1 1/2" walnut trim piece along each long edge to get 14"

4.  Rip the boadrs to about 6 1/2" and re-glue with a 1" strip of walnut right down the center to get 14".

Please put your design hats on a tell me what you would do or not do.  2 pics below.

I am leaning towards #1 so that I have a very nice uninterrupted curly maple board that will contract nicely with the walnut base.P1010001.JPGP1010002.JPG

PS.  I attended a class on shellac today.  Never used it.  I have another tool in my finishing box.

Nice! I tried to get in that class but it was full will be trying for the next one. I took Kevin's other classes and they were very good

I like option #1 as well. What' 21/4", on a table anyway? I think the walnut strip down the middle will make it look like a surfboard. I will retract that statement if you decide to go that route;). 

11 hours ago, Eric. said:

 

 

a77aa2d213ac267c012cc2b35bf66027.jpg

 

Color me impressed!

 

29 minutes ago, Ronn W said:

 

 

3. Rip the boards to about 11" wide and put a 1 1/2" walnut trim piece along each long edge to get 14"

 

This is an example of how that looks!

DSC01103 (800x600).jpg

DSC01104 (800x600).jpg

DSC01105 (800x600).jpg

22 minutes ago, K Cooper said:

I like option #1 as well. What' 21/4", on a table anyway? I think the walnut strip down the middle will make it look like a surfboard. I will retract that statement if you decide to go that route;). 

Ditto.

$4.50/bf for wide curly maple?  Can't beat that...you did good.

8 minutes ago, RichardA said:

This is an example of how that looks!

DSC01103 (800x600).jpg

DSC01104 (800x600).jpg

DSC01105 (800x600).jpg

But you have the outside edges walnut as well and not just a small stripe down the middle. Makes a world of difference. Guess I didn't see option #3. 

 All I can see is the dam  goat sack.  Sorry Ron.

  • Author

Nice table Coop. Leave it to you to combine 2 options to make a fifth option.

Thanks but no sir. That was RichardA's table. I could only wish!

Option 4 -- Buy some new stock, stick to your original plan and keep your wide curly boards for another project.  They will certainly will get used.  

I would avoid the racing stripe.  It will detract from the main show in your piece, which is the twisting legs.  When you have one unusual element you want to highlight, it's best to keep the rest simple.  

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.