Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

The Shop

  1. Started by Stasonis,

    I'm lucky enough to have a pretty spacious garage where I have started setting up shop. Unfortunately, living in New England, we also like to put our cars in there. And since cars, tools, and all other manner of garage goodies inevitably interest young kids, my two year old son tends to spend quite a bit of time in there as well. So my question is this: Has anybody done anything clever to kidproof their shop? I'm already pretty diligent about unplugging everything, lowering my table saws blade beneath the table, removing the router bit or hiding it behind the fence, but I'm about to purchase a bandsaw and I'm pretty sure he'll be able to reach the blade. Also, as I e…

    • 17 replies
    • 8.6k views
  2. Started by Bombarde16,

    Moving to a new house in three weeks and already drafting plans for (drumroll, please) a standalone workshop in the backyard. Toying with different ideas and while killing time meandering aimlessly doing important research in the home center, I stumbled across the clear, corrugated roofing panels. Wondered if I could do the roof with these, creating a massive skylight and perhaps getting some sort of greenhouse, solar heating. This is in northern Illinois, so we get everything from subzero mountains of snow to blistering summers. The default is wood trusses, plywood and shingles yadayada. But I wondered if these panels were even viable or desirable for a workshop…

  3. Greetings- Working on space management, totally cool as I just watched Marc's shop evolution and find myself with many of the same issues. Projects are evolving forcing me to do the same and the need of a router table is becoming very clear and imminent. SO question is for those due to space or even preference have utilized a wing of their table saw to become the router table. Obviously, one of the most respected Wood Kings- Mr. David Marks has his router mounted in wing of table saw. So I am reaching out to the most knowledgeable of families and asking for opinions and thoughts. Thanks so MUCH!!! Jc McGrath

    • 23 replies
    • 21.9k views
  4. Started by DeanJackson,

    So, my shop is somewhere between 150 and 200 square feet; the room is about 10x15, with doors on three (three!) walls; one to the laundry room, one outside, and one to the rest of the basement. My girlfriend - bless her genius - looked at my setup, and said "you need to take the workbench out. it's ruining the shop." After breathing and keeping calm for a few seconds, I asked, "ah, what?" Kelly responds: "hinge the top of the workbench to the wall with really sturdy hinges. Put removable posts under the front. When you're using the tablesaw for bigger stuff, you can fold down the workbench and have *tons* more room in here." It took me two days, and was the ide…

  5. Started by Kenny,

    a few shots of my latest acquisition and it's new surroundings. Picked up this old table saw/jointer combo this past weekend. It's in pretty decent shape considering it's age. A quick disassemble and clean up and it's ready to go. This saw has a tilting and raising table and the blade stays stationary, should be some fun. before shots... and where they reside now... The shop is a 20x20 building behind my house, but not connected to the driveway...I knew when putting it up, if it was connected, there would probably be car's, motorcycles and other silly thigs in the way. SWMBO has a portion walled off for her craft supplies, but I still mana…

    • 12 replies
    • 4.9k views
  6. Started by iSawitFirst,

    I've been reading the Shop Heating thread and have decided that a pellet stove may be the way to go for me. Can anyone answer these questions? 1. Stoves specs state they have a "fuel capacity" of x-lbs. Does that mean the stove has a hopper for storing sawdust and it makes the pellets automatically or does that simple mean they can hold x-lbs of pellets? 2. How do you make your own pellets? Can you use PVA glue? CA glue? 3. Some are thermostatically controlled. Does this mean they have motorized dampers (120V or low voltage required)? Any other advise is greatly appreciated.

  7. Whew.... If I have to redo this top for whatever reason, I'm buying one. Don't care what it cost. I had a large stack of mostly useless hard maple. The dumbass who stacked it to dry did a terrible job and the stuff split, twisted and was alomst fire wood. All 700 bf. Sad really. I was able to salvage about 75% of it to build a new bench. Man did it take a lot of prep. Not a striaght board over 6" or 5-6 feet. The planks were roughly 10-13 inches wide, and 8-12 ft long. About 90% spalted and ambrosia tracks. So it should be interesting once the oil hits it. I'll try to get some pics up soon, but the top's gonna be about 4 1/2 inches thick, 30 inches wide…

  8. Started by davetpilot,

    Hello All, About a year and a half ago, I published a video on YouTube demonstrating my shop built, inexpensive router lift and table with integrated dust collection. The router height adjusts from the top and changing bits from the top is a snap. I also incorporated a horizontal router attachment. The table is not a work of art...yet...but it is exceptionally functional and extremely inexpensive to build. The video, however, was lacking in quality and didn't demonstrate how the lift was built. After receiving over 15,000 views and many, many questions and requests for a better video, I finally put one together. It's not "Marc Spagnuolo" quality but it gets the job…

  9. Started by RomainSaucourt,

    Hi everybody, I've seen on a magazine , an horizontal router table like this one : My link What do you think about it ?

      • Like
    • 9 replies
    • 4.6k views
  10. Started by DannyBoy,

    What do you have in your shop and how do you protect it from dust? I'm looking to upgrade from an 7yr old dell inspiron and would like some recommendations...

    • 10 replies
    • 5.4k views
  11. Started by rhenson,

    Hi – I’m hesitant to ask, as everyone seems to be more on the “thinking of going pro” level, but I am day 1 fresh – I know nothing, but for some reason I have this urge to get into wood working. I have no space and my wife is begging me to pick some other hobby to get into, but I want to proceed and make it as painless on her as possible. We really don’t have much space, no rooms that I can claim at this point – so I want to start with a sawhorse and door style bench that I can collapse and store flat against the wall in the garage and pull out and assemble when I am working. I’m starting with hand tools to learn the basics, but I need some help on how to keep th…

  12. Started by dalboy,

    Hi all. I would like to build my own cyclone dust system, has anyone done this and how easy is it. Any pointers would be great

  13. Started by Saddlestrum,

    Hello all; Thought I'd pass along my experience with making a cyclone DC for my small shop. As our warehouse accumulates 5 gallon ("20 liter" for my fellow Canadians) empty pails with lids, I thought I'd try my hand at making my own cyclone. I had looked at the Dust Deputy but rather than part with some of my hard-earned money which could go instead towards coveted hand tools, etc., I thought, "why not try to make one myself?" The principle is pretty simple; dirty air laden with solids enters an enclosure that encourages a cyclonic vortex. The heavier solids drop down as clean air exits the top and returns to the vacuum. Note: my shop vac is a Ridgid with 1-7/8" …

    • 14 replies
    • 5.5k views
  14. Started by Juicegoose,

    So this weekend in between coats of paint on the wifes utility room cabinets I looked around the shop at wasted space. You see the wife and I just moved and so I've slowly been setting up shop. I'm all about best use for space and filling a need and the one need that has always been on my mind is my jointer. I own a ridgid jointer and although it doesn't have a use footprint it's oddly shaped enough that it's wasting a lot of space. So as I stared at the jointer in hopes it might magically transform I had an idea, put it under the bench! A couple weekends ago the local Habitat for humanity had about 30 solid door doors(80x36) malamine covered for 25 bucks a pop, 4 came ho…

    • 12 replies
    • 14.2k views
  15. Started by JeffT,

    I am re-laying out my garage shop (again), and am interested in plans for a mobile tool cart with a flip top, I want to have a belt/disk sander on one side, and a small planner on the other. The design part I'm curious about is how to make the top easy to flip, but keep it stable when I'm using one of the tools. Any advice would be much appreciated.

    • 9 replies
    • 11k views
  16. Started by simocco,

    I have a small shed (concrete block construction with a felt-bitument covered roof shed) 5m x 3m - although i work out of half of this! i was wondering if i should be concered about the environmentals - temperature for now - on both my projects/wood and tools. the winter in ireland last year got to about -8 Celcius, 17 fahrenheit, and the shed has no insulation heating or electric for that matter so it would have been that cold inside. does anyone have any recommndations on prefereable workshop temperature. thanks in advance!

    • 3 replies
    • 4.9k views
  17. Started by don reilly,

    I know there probably is a topic on this but I cant find it so I'll ask it here. Currently I just drag the hose around and connect it to the tool I'm using. I have a Jet 1200cfm vacume system right now, it is used as a portable vac it has wheels, I have been rolling around in my mind making it more of a perminate item but I dont want to spend large amounts of money on ducting. my shop has a ceiling height of 10' 6 " and is 24' x 24' inside, I would like to run a main line of 8" rigid from the vac on the floor up to the ceiling and a main run down the center with 4" gated drops and with flexable toubing that can be attached to the tools being used all my tools are not pe…

    • 9 replies
    • 6.9k views
  18. Started by TMFoughty,

    Over this past winter I purchased a Craftsman Table Saw. It is a decent size unit with a cast iron table top. I have noticed that there are some surface rust spots after a couple months (Live in Central Ohio). A couple questions... 1.) Is there a way to prevent this from occuring? 2.) What should I use to clean the rust off? And 3.) Can you put anything on the table top to help the wood slide easier? Thanks in advance... Todd

    • 5 replies
    • 4.8k views
  19. Started by DALSAW,

    I have a cabinet shop, but it's size is holding me back. It is in a 12'X16' building, a little less than 200 sq ft. Oh and I have a big UGLY 20' shipping container behind it that I use for storing materials. I need to build a larger shop, so what would be an ideal size for the type of work I do.

      • Like
    • 60 replies
    • 17.4k views
  20. Started by NotAShakerMaker,

    I finally have the opportunity to build a basement workshop from scratch. I've never lived in a home with a full basement, so before I embark on my wildest fantasies, I thought I would ask the group for some guidance. The home is located in the Mt. Edwards area of North Carolina, just out side of Chapel Hill. Ledge, boulders and clay make up the landscape. Basement is laid concrete block with a floating concrete floor. No floor drains or sump pump. I've been reading Fine HomeBuilding and other magazine articles on finishing a basement. I like the idea of laying sheets of 1 inch XPS on the floor and covering it with two layers of 1/2 inch plywood, laid and fasten…

    • 6 replies
    • 6.2k views
  21. Started by elwoodblues,

    x

    • 4 replies
    • 4.6k views
  22. Started by Bobby Slack,

    Since I started working in my garage, my shop is a mess. I never had a clear idea of how it will look etc. Slowly in my head I start thinking and will make improvements one wall at the time. What stops me is the location of the bench. I don't have a window on my shop ... but I could so that is not the problem. I am thinking of building a Roubo bench and in the back of it place a couple of Festool tables. What attracts me of the traditional bench is the mass because last time I flattened a big door my Festool tables were dancing la vida loca. Having the Festool tables will allow me to just use the Roubo for what is absolutely needed. Having four Festool tables will f…

      • Like
    • 22 replies
    • 5.7k views
  23. Started by jowens,

    So years ago I had a tree milled, and got close to 600 bft of 5/4 quartersawn. Half of it is probably 8" @12'. I now think of it as Albatross Neck Oak, it's stickered and takes up 1/3 of my garage. Without doing some major rennovation I don't have enough room to rack all of it horizontally. I do have enough room though to vertically store the larger boards. I'm concerned about warping. The boards have been kiln dried, and the research I've done stated as long as the boards were dried warping wouldn't be a problem. Would you agree? It might be years before I get to some of the stock. Any other ideas? Thanks! Jason

    • 10 replies
    • 11.2k views
  24. Started by Godet,

    I have a pretty small shop (about 9 X15) and its filling up fast...I've been pretty good about attaching the shop vac when I'm using machines, but it's just not getting the job done. So I'm looking for a small unit, perhaps even one that could be set up outside with just the hoses running into the shop Any suggestions?

    • 6 replies
    • 4.8k views

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.