Recommended Posts

Posted
4 minutes ago, K Cooper said:

That's just darn fine looking. Help me with the wood spieces. I know you're a mesquite guy but I don't see it here? 

Same wood choices as the bookcase I made last spring. Cherry mainframe, ambrosia maple panels, Walnut top and bottom trim and Peruvian walnut for the pulls. Turquoise inlays. Not a splinter of mesquite. But...

We're about to launch into a kitchen remodel. Mesquite doors. 

Posted

Yeah Baby! I might have asked you before, but is mesquite readily available in rough cut lumber in your area or do you have to special order it? 

  • Like 1
Posted
1 minute ago, K Cooper said:

Yeah Baby! I might have asked you before, but is mesquite readily available in rough cut lumber in your area or do you have to special order it? 

Not at all. Premium price no matter the source. It's available in bulk just outside San Antonio, Phoenix and southern AZ. If you want some for turning, there's a place SE of San Antonio that sells a dumpster full for $35.

Posted

Beautiful job, mick.  That's a great design and extremely well executed.  I love how the panels run vertical, the very subtle curves in the legs are perfect, and the pulls are fantastic.  The piece works as a whole.  Your design?

  • Like 1
Posted
51 minutes ago, Eric. said:

Beautiful job, mick.  That's a great design and extremely well executed.  I love how the panels run vertical, the very subtle curves in the legs are perfect, and the pulls are fantastic.  The piece works as a whole.  Your design?

Yes, my design based loosely on the bookcase I made last spring. The drawers were the most demanding. Baltic birch plywood core. I edge glued two pieces then crosscut a 3/16" slice off the end which I banded to the top edge of the ply. Measured down the height of the drawer and sliced off another 3/16" that I banded to the bottom. Then took the middle piece and resawed off the front and back faces for veneering the drawer. Matched up pretty well in most cases.

 

Posted

 

Yes, my design based loosely on the bookcase I made last spring. The drawers were the most demanding. Baltic birch plywood core. I edge glued two pieces then crosscut a 3/16" slice off the end which I banded to the top edge of the ply. Measured down the height of the drawer and sliced off another 3/16" that I banded to the bottom. Then took the middle piece and resawed off the front and back faces for veneering the drawer. Matched up pretty well in most cases.

 

 

 

 

 

 

Thats diabolical micks. Just curious, but why not just use the full piece for hardwood fronts? Too unstable in that vertical orientation? Anyway, beautiful work as usual.

  • Like 1
Posted

Mick - absolutely beautiful piece.  Love the design and species choices - and it fits the space very well.  Nice job, especially with the design part - that's the part I find the most difficult myself, so I have a lot of respect when people get it right.

Edit:  in particular the drawer pulls.  I may steal that idea from you.

  • Like 1
Posted
11 hours ago, micks said:

Yes, my design based loosely on the bookcase I made last spring. The drawers were the most demanding. Baltic birch plywood core. I edge glued two pieces then crosscut a 3/16" slice off the end which I banded to the top edge of the ply. Measured down the height of the drawer and sliced off another 3/16" that I banded to the bottom. Then took the middle piece and resawed off the front and back faces for veneering the drawer. Matched up pretty well in most cases.

 

Excwllent work, Micks!

So are you saying that it is face grain on the top and bottom edges of the drawers?

  • Like 1
Posted
13 hours ago, micks said:

Not at all. Premium price no matter the source. It's available in bulk just outside San Antonio, Phoenix and southern AZ. If you want some for turning, there's a place SE of San Antonio that sells a dumpster full for $35.

Oh? Tell me more about this San Antonio resource that I must be oblivious to. Cheap mesquite sounds like a swanky deal.

Also, awesome work on that desk - I really do love ambrosia maple, and those dovetailed pulls are a really nice detail.

  • Like 1
Posted
37 minutes ago, davewyo said:

Excwllent work, Micks!

So are you saying that it is face grain on the top and bottom edges of the drawers?

Thanks. No, the top and bottom are end grain that I sliced off before I resawed the face veneers.

53 minutes ago, Lester Burnham said:

Everything you've shown here is incredibly impressive. Truly inspiring. How long do you think it took you to make that?

I don't keep track, but maybe 150 - 200 hours. 

I'm getting lots of comments on the pulls. While the desk is my design, I got the idea for the pulls from an Instagram post a little while back. I've been saving the idea for the right project and felt that this was it. I wouldn't swear it, but I think this came from a Craig Thibodeau piece.

  • Like 1
Posted

Aw Micks,  you just had to make me drool all over my keyboard.  I love Ambrosia and Walnut together, it's a drop dead combination, and you knocked it outa the park.  Well done young'un!  Very well done.

  • Like 1

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   1 Member, 0 Anonymous, 75 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,009
    Total Members
    3,644
    Most Online
    Joseph b
    Newest Member
    Joseph b
    Joined