Popular Post drzaius Posted September 29, 2023 Popular Post Report Posted September 29, 2023 On 9/28/2023 at 8:16 AM, JohnG said: I’ve never seen pear butter before. It's just pureed pears, sugar, nutmeg, lemon and a decent hit of ginger. Then boiled down to a thick consistency. Delicious. I also made crabapple and peach butter this year. I like the butters (why are they called butter?) because they are not quite as sweet as a jam or jelly. I like things a little tart. 4 Quote
wtnhighlander Posted September 29, 2023 Report Posted September 29, 2023 @drzaius, that sounds delicious! Unfortunately, a late freeze prevented my pear trees from producing this year, or I'd give it a try. Quote
Popular Post roughsawn Posted September 30, 2023 Popular Post Report Posted September 30, 2023 I milled up 104-24" stickers from white oak branches, from last years slab milling project. I have a 24" white oak, and a 22" red oak I will be taking down and milling up into dimensional lumber in December. I'm not even sure 104 will be enough... 5 Quote
Popular Post Coop Posted September 30, 2023 Popular Post Report Posted September 30, 2023 We went to College Station TX today to Texas A&M University as it was ring day. Our granddaughter received her ring. A big day for the Aggies! She interviews with Lockheed Martin next week. Very proud grandparents, we are! 4 Quote
Popular Post wtnhighlander Posted October 1, 2023 Popular Post Report Posted October 1, 2023 Six hours of this: That's what happens when you go away for a week, it rains the only day free before returning to work, and your backup lawn care provider is out sick. 1 5 Quote
Popular Post Chestnut Posted October 2, 2023 Popular Post Report Posted October 2, 2023 I'm getting to the season where i need to mow every 2-3 days to avoid that happening. Did some more canning applesauce this time. 4 Quote
legenddc Posted October 2, 2023 Report Posted October 2, 2023 Never canned anything but you all are making me way to give it a try and some point. Was hoping to get some time in the shop this weekend but that didn't happen. Too much going on between soccer games and birthday parties. Will have to force some time in one night this week. Need to keep an eye out on the weather and find some time to power wash and seal the deck again. I will have to do some investigating to find a different product as the Thompson's one I was using doesn't seem to hold up very well. 2 Quote
JohnG Posted October 2, 2023 Report Posted October 2, 2023 On 10/2/2023 at 11:19 AM, legenddc said: Need to keep an eye out on the weather and find some time to power wash and seal the deck again. I will have to do some investigating to find a different product as the Thompson's one I was using doesn't seem to hold up very well. I need to decide what to put down on the new decking we had installed this summer. I was going to use Sikkens, but then found out that PPG bought them out and basically killed off the product. Quote
legenddc Posted October 2, 2023 Report Posted October 2, 2023 I realized before our AC wasn't on. For some reason one of the fuses blew. I replaced them and got it working again. On 10/2/2023 at 2:33 PM, JohnG said: I need to decide what to put down on the new decking we had installed this summer. I was going to use Sikkens, but then found out that PPG bought them out and basically killed off the product. I'm pretty sure I used this last time: https://www.lowes.com/pd/Thompson-s-WaterSeal-Clear-Exterior-Wood-and-Sealer-1-Gallon/5013247129 I need to find when I did it last before I bash it. It may have been two years at this point. Not sure if spraying it on didn't get enough coverage and I need to switch back to brush/rolling it or not. A quick search at Sherwin Williams has me looking at this: https://www.sherwin-williams.com/homeowners/products/superdeck-exterior-waterborne-clear-sealer At 3x the price I would hope it works better. I'll have to go over there at talk to them to see what they recommend. Quote
Popular Post gee-dub Posted October 2, 2023 Popular Post Report Posted October 2, 2023 Picked up a few random items from the sharpener's. 7 Quote
Popular Post Tom King Posted October 2, 2023 Popular Post Report Posted October 2, 2023 Been fighting Fire Ants for several days now. After the torrential rain from the tropical storm, I think they floated all over the pasture. We must have had over 100 new hills. I'm getting them, but it's been quite a job. Some of the poisons work for some, and others for different ones with no telling which will work. Sometimes one side of a hill will get killed, and the other not. I've bought all the fire ant poison from Ace Hardware, and ordered several times from Amazon. Waiting on more to come now. The main trouble is our pastures have finally gotten lush enough that the grass will last the horses almost all Winter, so I don't want to cut it, and the ant hills are hidden in the lush grass. The grass is warm weather Bermuda, but they will eat it even after it goes dormant better than hay. It took me decades to get the grass to this point. We used to feed hay from Thanksgiving to Easter, and last year almost Christmas to Valentines Day. Should be better this year if I can save it. 3 Quote
Coop Posted October 3, 2023 Report Posted October 3, 2023 Tom, are you treating the mounds or the property? I used to treat the mounds and finally started broadcasting the treatment and it has helped considerably. However, I don’t have the acreage that you have. Quote
Tom King Posted October 3, 2023 Report Posted October 3, 2023 I'm treating the mounds individually, and spreading some of the yard treatment pellets around the outside of the mounds. We had cut our pasture size back to ten acres since we were no longer breeding horses, but there are also some mounds in other places that are not in the pasture. I couldn't afford to treat the whole pastures and don't know what effect it might have on the horses grazing anyway. Some of the treatments are supposed to kill the whole mound, but they don't tell you it doesn't kill the queen that can fly. Others kill the queen. I think I've tried every brand there is. Some work for one and won't work on another mound. I have not found one that will kill all of them. I'm making progress, but I feel like I'm having to stay on it for a while to keep a surviving one from multiplying. I had thought I killed all of them a couple of seasons ago, but I must have missed one or a few. Back then we only had a half dozen or so. Now we had over a hundred all of a sudden. Quote
Mark J Posted October 3, 2023 Report Posted October 3, 2023 16 hours ago, Tom King said: Some of the poisons work for some, and others for different ones with no telling which will work. Mix a cocktail? Is this stuff safe for horses to eat? Quote
Tom King Posted October 3, 2023 Report Posted October 3, 2023 I put multiple things on some mounds. The hard part is getting enough to go around. Some I haven't put enough on and there are still some live ants. I just came in from putting the last delivery on, and there wasn't enough to hit all the remaining mounds. I've probably killed 80% of the mounds, but some still have live ants on one side, and some have moved 10 feet away to start a new mound. I should have more poison coming this week than it will take, but I'm trying to stay ahead of them moving with what trickles in. Orthene dust seems to be the most effective at killing new mounds. Mound Destroyer is hit or miss and works better if you scrape the top off the mound first. Mound Destroyer is supposed to kill the queen, so every hill gets some. One Shot does pretty good, and I like the jug it comes in and even use them for other pellets, but it doesn't go far and works better if you scrape the top off the mound and get the ants riled up before sprinkling. They come out immediately to get the Orthene dust sprinkled on top of a mound without having to disturb it but there can't be any wind when you use that dust. I used to just buy 50 dollars worth of stuff but changed to 100 dollars worth, and finally decided to stock up, but it all won't get here until Thursday. I have them all killed around the perimeter, and the only live ones are towards the center. I have killed all of the hills outside of the pasture. 1 Quote
legenddc Posted October 3, 2023 Report Posted October 3, 2023 I've been ordering any pest control stuff from Domyown.com. Here's their fire ant options: https://www.domyown.com/fire-ant-control-c-1_66.html 1 Quote
Tpt life Posted October 3, 2023 Report Posted October 3, 2023 We just used boiling water here, but never had a whole pasture infested. Boil a pot and pour it down the mound. It usually only takes once. Quote
Tom King Posted October 3, 2023 Report Posted October 3, 2023 On 10/3/2023 at 11:27 AM, legenddc said: I've been ordering any pest control stuff from Domyown.com. Here's their fire ant options: https://www.domyown.com/fire-ant-control-c-1_66.html I've been buying from them for a long time too, but shipping is not as fast as from Amazon. A number of the different brands of Fire Ant stuff use the same chemicals, just in different forms. I wish I had a big water boiler, as in several hundred gallons, but otherwise it's too slow for as much as we need to cover. 2 Quote
Tom King Posted October 3, 2023 Report Posted October 3, 2023 I believe I've killed them all. Our UPS driver brought some Mound Destroyer about an hour ago. I went back out to check and only found 4 mounds with ants still alive. All the ones and remnants of ones I put Orthene on this morning were showing no sign of life. I put some Mound Destroyer on all the ones that had been treated with Orthene only just for a little extra insurance. James, our UPS driver, said that he had heard of people killing them with grits. He said you put the dry grits on the mound and the ants eat them and swell up and die. I'm not sure about that but we may try it just for grins. Quote
Coop Posted October 4, 2023 Report Posted October 4, 2023 On 10/3/2023 at 10:34 AM, Tpt life said: We just used boiling water here, but never had a whole pasture infested. Boil a pot and pour it down the mound. It usually only takes once. I use boiling water in and around my vegetable garden and use Ortho Fire Ant Killer to treat mounds in the yard. Honestly, I think the Ortho just pisses them off and increases their sexual appetite! 2 Quote
Popular Post pkinneb Posted October 5, 2023 Popular Post Report Posted October 5, 2023 Found and reset the cutter leaving a slight ridge on boards off my Oliver lunchbox planer. Took me a couple cutters to find the culprit but ultimately I was successful and problem is now solved. 4 Quote
Coop Posted October 5, 2023 Report Posted October 5, 2023 On the Helical cutters, do you just rotate the problem one 90*? Quote
Popular Post pkinneb Posted October 5, 2023 Popular Post Report Posted October 5, 2023 On 10/4/2023 at 9:30 PM, Coop said: On the Helical cutters, do you just rotate the problem one 90*? Coop I found a YouTube on how to do it Using tape I was able to narrow it down to 1 of 3 cutters so I took one out at a time until it went away then cleaned both the pocket and the cutter bottom and reinstalled and that cleared it up (same side of cutter). Honestly it wasn't a huge deal but this planer is so good I figured I could get rid of it so after months of going to one side or the other I finally dug into it and 30 min later it was solved. 5 Quote
Popular Post gee-dub Posted October 5, 2023 Popular Post Report Posted October 5, 2023 On 10/5/2023 at 5:23 AM, pkinneb said: Coop I found a YouTube on how to do it Using tape I was able to narrow it down to 1 of 3 cutters so I took one out at a time until it went away then cleaned both the pocket and the cutter bottom and reinstalled and that cleared it up (same side of cutter). Honestly it wasn't a huge deal but this planer is so good I figured I could get rid of it so after months of going to one side or the other I finally dug into it and 30 min later it was solved. I'll just add some credence to this. I see a lot of problems with insert heads fixed by being more careful about getting things clean. It's easy to think that torquing the insert down will take care of that bit of grit or slime in the seat . . . not so. I take just a little more time to be sure the seat and insert are clean, clean, clean and this saves me a lot of time going back to make up for not being cautious. 4 Quote
wtnhighlander Posted October 5, 2023 Report Posted October 5, 2023 What @gee-dub said. Torqing down a carbide cutter with a speck of grit under it can shatter it like glass. DAMHIK 1 1 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.