Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

It's Shop Tour Time!

Featured Replies

  • Popular Post

I was asked to post a shop tour, so here we go . . . .

The building is a 42’ x 72’ pole barn built by FBI (Farm Buildings Incorporated) with half shop and the other half storage, aka “the barn”.  It has concrete floors throughout but the shop floor was raised and wood floors installed so you don't have to stand on concrete all day. This also allows room for the electric and HVAC to be run under the floor and provides some storage. The electric is 200 amp service and it has a forced air furnace. There is also a bathroom and slop sink in the shop. 


TS.jpg.38094ebe4bc42ac954c4ea616dc6d616.

Most of the machinery is Powermatic and Jet. There are two table saws, an older PM66 which still runs great, and a Rockwell contractors saw that is just used for dados. The saws sit next to each other, the tops are bolted together, and use the same fence. There is also a large out feed table.

jointer.jpg.17ec97fe84d6beaf4883bcf7f613

Next to the table saws is an 8" PM jointer. The dust collector is a Jet DC1100. Hoses are attached to the jointer and to each table saw and run through the out feed table. I attach the DC hose to whichever machine is being used and I don't have to move the DC around. I also use a wireless remote to turn the DC on and off.

miter.jpg.f7a68eb5ef72ea3140543c379ff14d

Behind the table saws is a Bosch 10" glider and a Kreg fence system. The Bosch glider is an awesome saw!

dp.thumb.jpg.20a49a66fa4351e67572196d0e0

PM drill press, clamps, and a Hegner scroll saw.

router.jpg.f3841cdb18efaf9b50c5eb4f513d5

Two shop made router tables and a Jet shaper. We have an older Delta shaper in there too that is not hooked up. If you are close make me an offer, you might get a good shaper at a great price.

assembly.jpg.df236b84681a34535114b78801f

4’ x 8’ assembly table, 20" PM planer, Jet 22-44 drum sander, air compressor which is piped around shop and barn, horizontal boring machine, Jet spindle sander, PM belt/disc sander, and PM band saw. The big red cabinet has all of the hand held power tools in it.

lathe.JPG.75e77ddb099a4f2782b9f6181a5f79

I recently moved the wood lathes into a separate room. This made room for the big assembly table. I was tired of building things on the TS out feed table, every time I had to make a cut everything had to be moved off and then moved back, that got old.

spray.thumb.jpg.b515a573cc6020460b77fbff

In the barn section there is a plywood storage rack and a spray booth. The spray booth actually belongs to my good buddy Dustin (dcustoms) on here. He was moving his shop and had no place to put it, I would not have been a good friend if I had not offered to “hold” it for him.

 

Thanks for reading and let me know if you have any questions.

 

Very sweet set up! Must be nice to have all that space!

Sent from my SM-N910W8 using Tapatalk

  • Author
20 minutes ago, Mike. said:

Hey CT - Nice set up!  Is this a hobby shop, part time business or full time business?  What kinds of projects do you typically build?  Too bad I don't have the space for a shaper or I might take you up on it.  

It is strictly a hobby shop. Build cabinets, furniture, or whatever. Next is a pool cue rack for my brother.

Thats a real impressive space CT.  I am not sure I could handle that type of space, I would be spinning circles trying to figure out what to do with it all.

 

Beautiful shop! I like the wood floors and especially like your miter saw set up. I really need to improve my miter saw station.

Great workshop and looks like a good amount of space for the future.  +1 on the spray booth.

Super nice shop CT!  Thanks for showing it off!

  • 6 months later...

Very, very nice setup! Looks well thought out. +1 on the wood floors and on the separate turning space. Thanks for showing it!

Sent from my iPhone using Tapatalk

Nice shop. You certainly have a lot of space to work and the wooden floor is great.

I like the Bosch glider too and have been thinking about a future purchase.

Way too clean......how often does the Maid Brigade come through there......very nice.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.