Project Showcase
Show off your finished woodworking projects and share videos of your work. Browse member-built furniture, cabinets, and other shop projects for ideas.
This space is not intended for spam or to drive traffic to your channel/site. If you post a video, please be sure to include a paragraph of text about the video and make sure the video is embedded. The forum usually embeds the video automatically if you drop in the link.
303 topics in this forum
-
i didn't want you guys to think i'm not doing anything, Mahogany with walnut splines, mitered pieces for the lid. i'm not sold on Mahogany, i don't know it just doesn't impress me much, not much grain and if i make another its going to be out of cherry i think. as usual comments or criticism are welcome, we're all friends here, thanks.
-
-
- 17 replies
- 6.5k views
- 1 follower
-
-
This one was a replica of TSN's Sportcenter desk made for the Hockey Hall Of Fame in Toronto The second batch was a Feature Wall made for outside the Toronto Maple Leafs' dressing room The last batch is just a few cutting boards I've done to use up scraps
-
-
- 10 replies
- 5.4k views
- 1 follower
-
-
This window mounted fan support is a long overdue shop upgrade project. Every time I spray lacquer I had to rig the fan to stay in the window (it fell once and bent the blades). And it didn't work very well, either. As much air came in the window as the fan blew out. Also, every bug that got near the window got sucked in by the vortex on the periphery of the fan. This is much, much better! Enjoy! David
-
-
- 9 replies
- 5.1k views
- 1 follower
-
-
Had an order for another stripes plaque in Walnut and Maple. This one is an SFC Stripe, about 12" x 18", finished in Nitrocellulose lacquer. And for size comparison here it is in front of the guitar I just built - David
-
-
- 5 replies
- 3.8k views
- 1 follower
-
-
Yes, another cutting board thread... sorry. (mods, if this needs to be moved please do so) This is an all Maple board 12" x 15" x 1 1/4". The top 1/2" is bookmatched with some nice ribbon in a few spots, mostly toward the left side. The reason I'm posting yet another cutting board is that I've never done one like this and that's typically what I post. I don't see any point in showing y'all cutting boards just like the last 10 or 20 I've made so you get to see the new ones and then I won't bother y'all again. Well, unless it's sort of the same with a new and interesting twist. I cut the board, drew the design in CorelDraw X8, and took the CorelDraw artwo…
-
- 2 replies
- 3.5k views
- 1 follower
-
-
Summer greeting from Tokyo, Japan This summer in Tokyo is of terribly hot. Someday was over 40 degrees Celsius. The western part of Japan was attacked by heavy rain. It is miserable! Anyway, please look and have fun my new works. Thank you, Yoshii Please click on the displayed video to start. My YouTube channel: https://www.youtube.com/user/myoshiiky One of old works: My YouTube channel: https://www.youtube.com/user/myoshiiky
-
- 2 replies
- 4.1k views
-
-
Decided to get a handle on my scraps and built a rolling storage cart so my shop can look a little less like a tornado just rolled through. The inspiration for this came from a Find Woodworking article. Mine is pretty close but I changed it up some. Made it bigger, adjustable compartment sizes. Here's a link to the Fine Woodworking article: https://www.finewoodworking.com/2012/06/22/a-smart-cart-for-scraps Let me know what you think! Thanks for watching!
-
-
- 5 replies
- 4.8k views
-
-
Not really a journal or a new project.. More just a look at some of my older projects and how they're holding up today. Obviously, there were a lot of commissioned pieces that I didn't have access to. If those commissioned pieces are doing as well as these then, life is pretty good!
-
-
- 7 replies
- 4.1k views
-
-
This is a scrollsaw project that I did a few weeks ago for my grandson. I used a Hawk Scrollsaw that I picked up second hand to scroll Kolten's name into some scrap poplar that I had left over from another project. I finished it off with a few coats of food grade mineral oil. I was trying to create a "cinematic film" type of video.I hope you guys like it.
-
-
- 4 replies
- 4.1k views
-
-
I'm building a rifle display case and decided I would incorporate a hidden latch for the door. So I cut the feet, latch, holes, and pocket for the latch on the CNC. Sort of a different project, more just doing a little engineered machining with the most appropriate tool in our shop for that purpose. So here's a short video of cutting the pocket on the edge of the bottom board - Enjoy! David
-
-
- 17 replies
- 6.5k views
- 1 follower
-
-
One of my students cutting her first CNC project, a simple 2D sign for her earring business. I love the grin on her face near the end.
-
-
- 1 reply
- 3.6k views
- 1 follower
-
-
I had piles of f style clamps laying all across my shop and a couple months ago I decided to figure out the quickest, easiest, and cheapest way to get them on the wall. Here’s what I came up with:
-
- 1 reply
- 3.8k views
-
-
There really wasn't a need to do a video but I wanted to and that's about all the reason I need to shoot videos. The upgrade is to place spacers between the frame and the rack on the Y axis so that the pinion will achieve 100% engagement on the rack. As designed, the pinion had about 75% engagement on the rack because the rack is bolted directly to the frame and that means you can't utilize all of the rack or the pinion would hit the frame (better explained in the video). Several of us Saturn owners pointed this out to Nate and we discussed options for improvement. What Nate came up with is spacers that simply drop into place. I haven't had time to shut the CNC …
-
-
- 4 replies
- 4.1k views
- 1 follower
-
-
I posted photos of the Longworth chuck discs a couple of weeks ago but have finally gotten around to making a short video of the process. Nothing new or special but just wanted to do the video - David
-
- 1 reply
- 3.8k views
- 1 follower
-
-
-
So, not really a woodworking project but I know a lot of us ponder the best ways to heat/cool our shop. When it got really cold after Christmas I decided I'd had enough with crappy wall and space heaters and decided to take the plunge with a mini split. I was able to do 90% of the install myself and hired an HVAC tech do the final connections. Hope you enjoy the video!
-
-
- 13 replies
- 4.7k views
-
-
This was such an obvious thing that I am sure someone else has come up with it before me but I don't think I've seen it before. One caul has a T slot that the head of the clamp slides in. The other caul has a fork at each end the bar slides in. You can use a rubber band to hold the forked caul to the movable jaw. I also added some holes to insert bolts which prevent the clamps from falling out. I'm kicking myself for how much I've struggled with this kind of glue up in the past with clamps going flying from the opposite end you're messing with and this makes it just ridiculously easy.
-
-
- 14 replies
- 4.8k views
-
-
Once you get all the pieces cut it's time to decide which pieces will go where and in what order and orientation. There are many ways to do this but I chose to just take one from each batch and see how it looks on this one. So I thought I'd do a lighthearted video of the process. Enjoy! David
-
- 0 replies
- 3.5k views
- 1 follower
-
-
So... I've been in creative mode lately to augment our Etsy shop and have come up with more unique cutting boards, trivets, etc. I haven't done a video in a month so it was time for another and I decided to do one on this cutting board. It's edge grain Maple with Walnut inlay and the rosette is left over pieces from end grain cutting boards. I knew those little pieces would come in handy one day! The board is 12" x 16.5" x 1" thick. For those who play guitar this is styled after a 00 size Martin guitar. For those who don't play guitar, it's still styled after a 00 size Martin guitar. Here's the finished board - And here's the making of video - …
-
-
- 3 replies
- 4.5k views
- 1 follower
-
-
Hi in this video I show how I made an affordable modern coffee table. As always let me know what you think! constructive criticism is welcomed! I hope you enjoy this Build!
-
-
- 10 replies
- 5k views
-
-
My cousin asked me for a big cutting board that two people could use at the same time. It ended up 36×16 and probably weighed 25 pounds. After a few months of nothing but shop projects it was nice to get back to making something for someone that will hopefully be in their home for years to come. The board is made of walnut, padauk and yellowheart. First time using any of those species. LOVED working with yellowheart. Smooth as glass after going through the jointer and planer. Padauk had a little bit of tearout going on. Overall, fun project and the best part was the finish was super easy.
-
- 4 replies
- 3.9k views
-
-
Hi Woodtalk community, Please let me know what you think about this project and especially let me know if their are any areas where I could improve, whether in woodworking, editing, etc. I'm all for constructive criticism and learning. This my first video and I plan to make more in the coming future. About Me My name is Jayson and I have a passion for creating and designing things. I'm currently attending college for a degree in engineering. That's why i enjoy woodworking,etc. because it allows me to express my designs as real-life products. I hope you enjoy this video as much as i did making it! Thanks
-
-
- 13 replies
- 5.3k views
-
-
-
Weird, I didnt even realize this section of the forum existed till I came here to post my video. Happy accident I guess! I had always wanted to get into woodworking and video. For woodworking, space/time/money was always the big roadblocks for me. For video, I didnt really know have anything I wanted to shoot. When I got into woodworking in the beginning of 2017 I figured the two paired nicely. I've been in the website/digital industry for the past 10 years and also have a background as a CAD jockey. Woodworking, plans, video and website all seem to go together quite nicely so I figured I'd start a YouTube channel and website. I actually filmed this back in the summ…
-
- 11 replies
- 4.5k views
-
-
IMO, this section is getting so much less activity than it did when it was under “Projects” or whatever the original name was. I’m sure/think that others, like me, fail to post due to the title?
-
-
- 8 replies
- 4k views
-
Who's Online (See full list)
Forum Statistics
- Total Topics 32.1k
- Total Posts 437.6k
Member Statistics
- 26,010 Total Members
- 3,644 Most Online
-
Lolli4 Newest Member ·