Recommended Posts

Posted

I think you could cascade a highly viscous clear epoxy down it to coat everything, and conceal the cracks, but you'd still have durability issues with the epoxy scratching, hazing, yellowing, etc. 

For sink that is never used, you could get away with this for awhile, but otherwise, it is highly impractical. 

Posted

Maybe the wood layers could be sealed with a thin resin that would soak in or be vacuum infused . That sort of sink only belongs in a guest bathroom. Notice there is no stopper in the drain. No one should be using a sink like that for brushing teeth ,shaving or soaking anything especially on a daily basis. Washing hands might leave some soap scum but the water will drain away quickly.

I have seen all sorts of innovative uses of wood on yachts and in mansions. Those places have staff that stay on top of cleaning and maintenance of expensive and delicate surfaces.

Posted

I think it's like the reverse of a boat.  Like they say in marinas, about boats staying in the water:  "If you put it in the water, it's going to get wet."  meaning water will find a way to get in.   The reverse, for that sink would be:  If you put water in it, it's going to get wet.

Posted

In short order, and even sooner than the rot, it will have mold in the corners formed between the layers.  I do not think the design will work for a sink even if you made it out of Corian.

Now on a smaller scale for a decorative bowl the idea has merit m

Posted
5 minutes ago, Tom King said:

What broke?  Did the knob part break in two?  It looks like it's still long enough to me.   

exactly the same as what happend to Marc

I just lost the other little parrt.

Posted

Well, you have a few spare parts, but doesn't look like the one that you might need in the future.   I can see where that could easily happen.

I'd contact Rob Lee.  He'd want to know.   If they don't already, they'd want to know that they need to keep this spare part.

You won't get Rob at this number, but if they have the part available:

  Customer Service
  1-800-267-8735
  customerservice@leevalley.com

  • Like 1
Posted
39 minutes ago, wdwerker said:

This could be what you need. I have broke several of those over the years.

https://www.harryepstein.com/index.php/replacement-pin-for-6-square.html

Yes that bookmarked. I already ordered 2 new squares so when i need somethign else i'll order a couple backups. Thanks steve.

 

45 minutes ago, Tom King said:

Well, you have a few spare parts, but doesn't look like the one that you might need in the future.   I can see where that could easily happen.

I'd contact Rob Lee.  He'd want to know.   If they don't already, they'd want to know that they need to keep this spare part.

You won't get Rob at this number, but if they have the part available:

  Customer Service
  1-800-267-8735
  customerservice@leevalley.com

Sorry to be misleading i have the PEC ones from HJE i just linked a picture from Marc's instagram because it was more illustrative than my picture.

Posted

I'll probably break one tomorrow.   I can't believe I've never broken one, carrying a combination square in my toolbelt for 44 years now.   I don't wear a toolbelt every day, but probably about half the time.

Posted

I have broken several because I tend to overtighten them. I guess I worry too much about them slipping. Eventually the lip on the bolt cracks off. Of course after paying over $25 for one from Starrett I was all over the $4 price at harryepstein.com. Bought 6 , used 2 and I've had the other 4 for several years now. 

Posted

Finally flying home this morning!  Got to the airport when I realized that my name was spelled wrong on my boarding pass. 

So, before going through security, I went to the counter to get it fixed and was told that they only fix that it security catches it and they rarely catch it. 

Sure enough, they didn’t catch it. 

  • Haha 1
Posted

Untitled.thumb.jpg.b195991ddc48b132bcf89c20713394c5.jpg

Ordered from festool recon and this shipping page is super cool. Not really any point to it but still cool. Kinda excited to try out this RTS 400 bought it honestly for touch up drywall work based off a recommendation on FOG.

Posted

I notice Festool has a lot of sanders, ranging from around $200 to $600 new, if you don't mind, what are the biggest differences? I'm thinking about making the leap and getting a sander and one of their dust extractors. 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   3 Members, 0 Anonymous, 44 Guests (See full list)

  • Forum Statistics

    32k
    Total Topics
    437.5k
    Total Posts
  • Member Statistics

    26,007
    Total Members
    3,644
    Most Online
    FurniCore
    Newest Member
    FurniCore
    Joined