Popular Post wnaziri Posted April 12, 2017 Popular Post Report Posted April 12, 2017 I decided to make a coffee table for us. I have seen many designs in the past but I really did not want to make a copy. So, I decided to do the following over the past 4 weeks. -The base is mahogany and the top is qs anigre. -It is finished with 3 coats of Arm-R-Seal satin. -The table legs are angled at 3 degrees. -I used epoxy for this project. 15 Quote
Coop Posted April 12, 2017 Report Posted April 12, 2017 Really cool design and great wood combinations! Quote
lewisc Posted April 12, 2017 Report Posted April 12, 2017 The top really stands out for me. Well done! 1 Quote
RichardA Posted April 12, 2017 Report Posted April 12, 2017 Damn nice, I love floating tops, especially when they show off the wood. Quote
..Kev Posted April 12, 2017 Report Posted April 12, 2017 Super nice job! That would be an awesome addition to just about any home! Quote
drzaius Posted April 12, 2017 Report Posted April 12, 2017 Beautiful design, nicely built. The 3 degree splay on the legs is perfect. Quote
Ronn W Posted April 12, 2017 Report Posted April 12, 2017 Sign it and use it forever. I like it. 1 Quote
prov163 Posted April 12, 2017 Report Posted April 12, 2017 Very cool! Nice wood combination and the 3 degree leg angle is subtle but adds a touch of the unexpected. Quote
sheperd80 Posted April 12, 2017 Report Posted April 12, 2017 Beautiful work. Its got a nice modern/craftsman look. Sent from my SAMSUNG-SM-G890A using Tapatalk Quote
bushwacked Posted April 12, 2017 Report Posted April 12, 2017 great work! Never heard of this Anigre wood though ... looks great! How did you attach the top to those cross braces? Quote
pkinneb Posted April 12, 2017 Report Posted April 12, 2017 You nailed it! I really like the proportions of the piece. Quote
BonPacific Posted April 12, 2017 Report Posted April 12, 2017 24 minutes ago, pkinneb said: You nailed it! I really hope he didn't or Eric will be all over this. Great looking table Wade! 2 Quote
gee-dub Posted April 12, 2017 Report Posted April 12, 2017 A little late to the party so I can only echo what others have said. Sweet design. beautiful material selection and finish choice, wonderfully executed. There is some serious talent on display. Well done. Quote
wtnhighlander Posted April 13, 2017 Report Posted April 13, 2017 Wade, that is beautiful. I love the clean design (executed perfectly), and the material selection. I see a diagonal streak on the top in photo #2. Is that some sort of grain anomoly, or smutz on the photo? I don't see it in any other pics. Come hang out with me at www.mrmccormickmakes.com Quote
Popular Post wnaziri Posted April 13, 2017 Author Popular Post Report Posted April 13, 2017 11 minutes ago, wtnhighlander said: I see a diagonal streak on the top in photo #2. Is that some sort of grain anomoly, or smutz on the photo? I don't see it in any other pics. That is actually a streak of greenish anomalous grain in the wood. it was the only piece with such a streak. I chose to incorporate it and put it in the corner rather than exclude it. I thought it was a nice way to break the straight grain. I even thought of using it as a branch and adding a couple of inlay lilies on either side but I thought it would not match the design of the rest of the piece. So, it is there as an imperfection. I used to want "perfect" lumber but the more I play with really "refined" lumber, the more I appreciate inclusions / imperfections / nature's flaws. 5 hours ago, bushwacked said: How did you attach the top to those cross braces? There are no nails in the piece anywhere. (I don't want to disappoint Eric, of course!). The top is held with screws that are passing through slots in the cross pieces, to allow for some movement. 3 Quote
Unknown craftsman Posted April 13, 2017 Report Posted April 13, 2017 Nice clean work I like the imperfection. Aj Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.