Finishing
2,922 topics in this forum
-
Not sure if this is one of those things that is talked about more than is actually practiced, but I've been using the glass marble air displacement method in my cans of finish and it really does work great. Bought the bag at Michaels for $2 or something like that. Been using the same can of ARS and Butcher Block for a few months now. Good as new. I keep the marbles in my finishing cabinet and add a few each time I pour out some finish.
-
-
- 13 replies
- 3.5k views
-
-
Now that we have finished sanding with 320 grit sanding sponge, we would like a matt finish but don't want to add color! We saw the Sam Maloof finish is one of the best. Do we sand between applications? Our burl is "live edge" as we have heard it called ( not sanded, left rough ). Do we apply the finish on the edge? Oh, we burned the edge then brushed! All advice encouraged!
-
-
- 4 replies
- 3.1k views
-
-
Hi guys - I started finishing a coffee table with the Sam Maloof Poly/Oil finish but wanted a little more protection so I decided to use Arm-R-Seal after a couple coats of the Maloof. After putting on the Arm-R-Seal, I noticed that it got tacky really quick so that when I went to wipe it off it almost seemed like wiping off drying shellac. My first inclination was that the previous coat of Maloof hadn't dried, but I gave it 48 hours and I live in California which is fairly hot and dry. Could this be a bad batch of finish or does this just indicate that my piece wasn't dry? Thanks very much for the help in advance!
-
-
- 9 replies
- 4.6k views
-
-
In completing a dark cherry shadow box, I was told that for filling in corner gaps or trim gaps ...it in this case braid nail holes, that walnut wood filler will hide or blend where it won't be noticed. Unfortunately the dark wood is showing the wood filler so much that I think I might have to start this project over, but due to a deadline this option is not preferable. I was trying to stain the cherry (I used red mahogany) so it would not show the wood filler but the brad holes are very noticeable. I was actually going to try and dig out the walnut wood filler to maybe use something else but that seems like a lot of tedious work with not knowing if the end result will pr…
-
-
- 17 replies
- 4.6k views
-
-
Making those tables for the wedding as some of you already know. I got Thompsons water sealer/cedar stain for them to keep them protected and to make the wood a little prettier. Does it have to be hand brushed on or can it be sprayed? My father mentioned putting it in his spray gun and applying it that way, but I don't know how effective that would be. The wood is 2x4 and 2x6 lumber and 1x6 pine dog ear fencing boards for the top. I still have to sand down the tables before putting the sealer on anyways so I have a few more days before I can even think about sealing it. How long does that stuff have to cure before people in dresses and khaki pants can sit on them without …
-
- 4 replies
- 3.5k views
-
-
Following up on an earlier post, I'm going to strip a table top and refinish. Has anyone ever done this after they've used the CN blotch control? I need to go all the way down and change the dye color of the wood. Hoping the blotch control doesn't impact in any way? thanks.
-
- 6 replies
- 3k views
-
-
I have the Graco Pro-Shot II sprayer. In the instructions it says not to spray flammable finished since the motor is not explosion proof. How big of a danger is this really? I spray single smaller pieces, at the most something book cased sized and that very rarely. I also have a well ventilated garage that I would be working in. I would like to be able to spray shellac etc.
-
-
- 14 replies
- 3.9k views
-
-
Hello all. New here. I'm refinishing a piece of furniture that was built with different types of wood. I used red mahogany oil penetrating stain. The sides and the top of the piece are birds eye maple and the rest of the piece is mahogany . After two coats of red mahogany I figured out it was never going to be dark enough. So I tried to use a walnut gel stain. The gel stain does not penetrate when used over the oil based penetrating stain. It simply didn't make any difference in the color. What is the best way to darken the birds eye maple so that it looks more like the color of the mahogany? Thank you!
-
-
- 15 replies
- 12.4k views
-
-
After my first foray into lacquer, I really like how fast it dries. I also really like how it can be thinned out so much to allow a super fast drying coat that bugs and dust don't have much time to settle into. Can a similar approach be accomplished with water based products? Can I add a lot of water to thin it out, or will it be a disaster? I think the recommended thinning is only about 10% for poly, but not sure of this is max.
-
-
- 10 replies
- 3.6k views
-
-
Hello all, I recently made a table as a school project and I'm looking to apply a finish to it so that it's feasible to actually use it. The table is made using three different kinds of plywood: the table top is made of maple ply with a center inlay of cherry veneer ply. The legs are made of a more fine-ply birch plywood. I've included a few pictures for reference. Another note is that the table was made using CNC joinery, and is easily assembled and disassembled, so if it is at all possible I would like to keep that functionality because it is a pain to move when fully assembled. Let me know what some of my options are, and thanks!
-
- 8 replies
- 3.1k views
-
-
I will be spraying some shellac, latex paint and oil based poly, what do I need for a resperator? Does HF carry one that would be adequate?
-
- 2 replies
- 2.8k views
-
-
Last summer, I completed the build of my kitchen table top, and finished it with 3 coats of gloss enduro var. Its a birdseye table lightly darkened with transtint antique maple (over Charles Neil's pre-stain). Took plenty of advise on this site in the process, and it looked great! I hadn't yet built the trestle base and i knew it was going to take me a while, so i just placed the table top right on top of the old table in the kitchen. About 5 days into its use, my 2 year old made a series of small divots with the bottom of a metal spoon - i knew this was going to happen sometime, but didn't expect it sooo soon! Roll forward to today, the trestle base is now…
-
-
- 5 replies
- 3.9k views
-
-
I've used West Systems, as recommended by just about everybody. And it's a great product. Love the pumps. Recently purchased their roller and spreader and got better results. But I still get bubbles. And in the end, I think a pour-on is more suited to my needs. So, what have you all used that worked well?
-
-
- 4 replies
- 2.8k views
-
-
Hi Marc, I get great finishing results using your "simple varnish finish" On my current project, a changing table/dresser, my daughter-in-law requested a painted white finish. I'm using Benjamin Moore Advance paint (satin) brushed on. On a sample I tried putting a couple of coats of GF High Performance Satin Poly for extra protection. I wiped it on and it seemed to work nicely. Is there a reason I shouldn't wipe it on? GF doesn't seem to recommend that as a method of application. Using WB poly to get a clear coat over the white paint. - Mike
-
- 2 replies
- 3k views
-
-
I use an earlex 5500 for spraying, and am thinking about spraying some shellac on my next project. Was just looking for some General advice. Since its not a sealer in my case, I will prob go with regular waxed shellac. Should I make my own, or just go with off the shelf shellac? Also, what pound cut is good for spraying? How about needle size? I use a 1.5 mm needle for polyurethane, and it seems to do well.
-
-
- 13 replies
- 8.3k views
-
-
Okay, I know this is way basic, but I'm just getting started and I've already made my first mistake. I'm trying to restain an old wood table. I've stripped off the old finish successfully and sanded down to what I think is pine. Yesterday I put a thin coat of water-based wood conditioner on the surface. Today, about 24 hours later, I did my first coat of oil based stain and polyurethane in one. Then I realized the wood conditioner was water based. Doh. The stain seemed to go on okay, though it being my first time, I guess I don't really know. So, my question is, what do I do now? When I check it tomorrow what do I look for? Do I need to strip or sand it again and sta…
-
- 6 replies
- 42.3k views
-
-
Recently Shannon extolled brushing with GF water-based 'Enduro-Var'. He seems to like the stuff. Others do as well. Here is my question: I am really, really having a problem seeing that the use of any water-based finish is nothing but a ruination of any piece of furniture. Here is why: In a 'past life' I worked as a chemist-assistant at a research lab for a paint manufacturer in Summit, NJ (hint). Every day, we were trying new formulations of water-based 'latex' paint. The problem was always - always - trying to balance durability against congealing and surface flow out. This is so because - guess what - oil and water do not mix. We were always trying differ…
-
- 10 replies
- 6.8k views
-
-
Hello everyone! I'd like to achieve a nice ebony finish on my antique teak (Aunt Teak?) dining table but I want to make sure that the beautiful grain is NOT obscured. Should I use an ebony stain or ebony dye?
-
-
- 36 replies
- 10.1k views
-
-
We have a 1950s wormy chestnut paneled great room that need brought back to life. What type of finish do you recommend? Thanks for your help.
-
-
- 3 replies
- 3.3k views
-
-
This year I decided that I would expand my finishing repitoire. Up until this point, I have mainly been a poly user. I often spray GF high performance poly with great results. In the winter, I use wipe on oil poly (also with great results). Those are my "go-to" finishes, but I recently expanded in using more oil finishes (watco and pure oils). I have always wanted to try lacquer, as Marc always sings its praises on his videos. I also really liked the idea of a fast drying finish that I could apply in a day, and avoid bugs in the completed project. I was nervous to try lacquer mainly due to its high toxicity and dangerous nature. So I decided to go out of my comf…
-
can i use poly over enamel spray paint? this might be an overkill not sure?
-
-
- 4 replies
- 5.8k views
-
-
I recently learned of the varnish technique of applying several thin coats, half varnish, half white spirits, with a cloth (originally from the Wood Whisperer site). I decided to try it out for the last coats on a new oak countertop that I'm varnishing. It was prepared by sanding and degreasing with acetone. I'm applying a polyurethane with a white spirit base, and had already completed two coats. It'd been dry for days, and then it was lightly sanded and the dust removed with a cloth dampened with white spirits. I made the 50/50 mix and poured some on, spreading it with the cloth, then finishing by pulling it from end to end in the direction of the wood grain. …
-
- 6 replies
- 3k views
-
-
I've been eyeing the Earlex HV5500 as small HVLP system for the shop. But I also have a 25gallon 6HP compressor for shop air that should be more than capable of running an HVLP conversion gun... I'm looking for thoughts and comments regarding either direction. I also understand that several folks prefer to use the HVLP systems for Non-oil clear finishes, lacquer or shellack... why not for oil based finishes, Arm-R-Seal etc??? I just wonder if it's worth including spray applications in addition to my traditional wipe on finishes. Thanks!!! Andy
-
- 7 replies
- 3k views
-
-
Just watched a video of someone using windshield washer fluid to thin latex paint for spraying. Any thoughts?
-
- 3 replies
- 4.6k views
-
-
Hi all - I've lurked here for a while, but this is my first post. I've stripped an old table - it was last finished professionally 30 years ago. I believe the guy used a brown dye, then tinted lacquer over top for a fairly opaque finish, brown with hints of cordovan. I think of it as my "mutt" table- it appears to be a mix of walnut, maybe poplar, and some mahogany veneer on top. I have never, ever experienced a finish so reluctant to be stripped as whatever crap was on the table legs. Holy moly (see photo). This is a re-strip; a couple of weeks ago I stripped it and finished it with General Finishes Empire Red Dye Stain, and then GF Georgian Cherry a…
-
- 10 replies
- 3k views
-
Who's Online (See full list)
Forum Statistics
- Total Topics 32.1k
- Total Posts 437.6k
Member Statistics
- 26,010 Total Members
- 3,644 Most Online
-
Lolli4 Newest Member ·