Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Finishing

  1. Started by Bevans,

    I am making a dresser using white oak and Boiled Linseed Oil instead of stain. I will finish with a poly. Do you guys that use BLO apply it to the inside as well? I will spray a coat of finish on both sides when I get to that point but it seems like a waste to apply the BLO to places that will not be seen. Thoughts appreciated. Thanks

      • Like
    • 3 replies
    • 3.7k views
  2. Do I have to alter my wiping varnish mix if I use odorless mineral spirits instead of the regular smelly mineral spirits? Thanks guys Taylor

    • 3 replies
    • 2.9k views
  3. Started by david j,

    Newbie here with hopefully some resolution. I just recently fabricated some built in bookcases all out of walnut veneers for a custmer. I will admit that building is my strongpoint and the finishing my weakness. So prior to finding this site and really researching the proper process I went to Rockler to get info and the suggested supplies. I sealed all the work with Bullseye shellac prior to my staining, they never mentioned anthing about thinning it down and I mentioned to them that I was using it as a persealer only with the Arm R Seal they recommended for my top coating. Well the staining process (general finshes oil stain) looks like crap. After spending the day today…

      • Like
    • 7 replies
    • 3k views
  4. Started by suiciedchild,

    In the process of building a Greene and Greene inspired coffee table out of genuine mahogany, And wanted to know if any has a particular formula for the stain typically found on original pieces or close to it. I have never dyed / stained anything of this size and I am not expirenced enough to be able to mix and match on my own, Darrell Peart's book has a general formula , but I'm also looking for a brand that someone has had good results with, any help would be appreciated. Thank you.

    • 22 replies
    • 9.9k views
  5. Started by Dnorris1369,

    I made another toy box for a friend and came out good except for the polycrylic. It had bubbles and runs all in it. I tried to sand it down in spots and got carried away and removed paint. What should i do now. If i go get stripper wont it remove paint also? not really sure what to do from here any help would be great thanks dustin

    • 2 replies
    • 2.9k views
  6. Started by Coop,

    I'm opening a new can of ARS and am out of the Bloxygen (argon). I have a cylinder CO2 here in my shop. As it's heavier than air and will displace it, I was thinking of using it. Anyone know if the CO2 will any adverse affect on the ARS?

      • Like
    • 34 replies
    • 7.9k views
  7. Hello from a new guy! I am in the process of refinishing a 75 year old teak dining table that was originally stained a very dark brown and I intend to replicate this original dark finish. After stripping and sanding, I notice there are uneven colorations on the wood. Do I need to strip and sand again to try and achieve a more uniform bare wood finish before staining, or will a dark gel stain (like General Finish Java) effectively hide the uneven colorations in the wood? Thank you very much for your help!

    • 5 replies
    • 6.9k views
  8. Started by hsutt699,

    I'm hoping someone can help me! I'm in the process of refinishing a solid oak antique buffet. The table-top is pieced together with multiple pieces of wood with a total surface area of about 18x60". The surface was in rough condition since it had sustained some water damage at some point in its history causing 2 of the wood seams to pull apart and warp. I removed the old varnish and stain with a 220 grit sandpaper to expose the raw, unfinished oak. During this process, I spent a great deal of time sanding the areas that were raised from the water damage in an effort to flatten/level the areas. Next, it was all wiped-down and a few days later, I added a pre-stain …

    • 3 replies
    • 5.9k views
  9. Started by Warren Hein,

    I'm in the process of building a cherry trestle table, and after flattening the top, I have several spots with rather deep tearout. I'd much rather spend my time planing than sanding, so along with a restored Stanley #4 , my #7 and card scrapers, I purchased a Lie Neilson scraper plane. I can take very fine shavings with it but feel like I'll be at it for a very long time at my current rate. My #4 is set up with a 35 degree bevel so should I increase the bevel on that and hit it again with that before finishing up with the scraper plane? What would be a good angle for this type of wood? Or should I try filling in some of the tearout and just clean it up with the scraper…

      • Like
    • 34 replies
    • 9.5k views
  10. Started by got wood,

    I almost always use tung oil as my 1st coat on most furniture I make. I make outdoor stuff, benches, tables, chairs ,etc. and I mostly use red cedar (eastern and western), oak (red and white) and occasionally pine. After the tung oil I sometimes stain but usually just apply several coats of a marine spar varnish, usually epathanes. My problem is the yellowing after a year or so. I do like that soft aged look on most stuff but some things I want to keep the original contrast of the sapp and heart wood. By the way, not all of the stuff I make is used outside and a lot of it does not have exposure to direct sun, so I know it's not the sun and I know It's not the epathane…

    • 3 replies
    • 7.4k views
  11. Started by haverlad,

    I am new to the site and apologize if there is already a thread on this topic but I couldn't find a forum search feature. I am working on a cabinet project, using cherry. I have some both some lighter and darker mixes in the wood and am wondering if it is possible to use a finishing method to get them to look similar in color at the end. I was thinking maybe dye in the lacquer might be my best bet but wanted to reach out for opinions. Second question is whether anyone has suggestions on plywood to use for sides, backs, etc. I like the lighter look inside of the cabinet but would like the exposed sides to have the same color/look to the cherry face frames and door…

      • Like
    • 38 replies
    • 9.1k views
  12. Started by Chicirda,

    I am close to finishing up a vanity/makeup table. The main body, drawers, legs and mirror posts will be painted with chalk paint and sanded for a distressed look. The top, however, was simply going to be a light wood stain. My question.... Do you think it will look ok to have a glossy lacquer finish on the top with a distressed chalk paint look elsewhere? Your input is appreciated TIM

    • 6 replies
    • 3.1k views
  13. Started by Robert Holmes,

    Hey I was working on applying some finish to a couple Christmas projects last night. I was following Marc's method he used in the humidor build for a high gloss lacquer finish. I applied a coat of lacquer last night using a brush as I don't have any spraying equipment and when I check on it this morning it had white patches in it. I was using Watco Lacquer Gloss Finish. I was wondering if this was what's referred to as blushing as I don't have a lot of experience with lacquer. My shop humidity was around 40-45 and temperature was 15C (59 F). The surface itself is smooth (except for some minor runs) and does not look pitted. If it's a temperature problem, I might b…

      • Like
    • 8 replies
    • 3.3k views
  14. I acquired a fairly nice table finished in mahogony, but with nicks in the edges revealing a yellow "sub-finish." Since the damage was significant enough that a re-finish appeared necessary, as I began stripping, I found that the edges, rounded, or beveled, or with other multi-faceted cuts, which did not have a veneer, were painted yellow prior to the final finish being applied. I am guessing this was to faciltate a uniform look when the final finish was appplied, but I am only guessing. Can anyone tell me why this is and, if I remove this yellow, what do you suggest in the refinish?

  15. Started by N00b-in-training,

    I've been commissioned, by my wife, to build a few picture frames. She wants them to be aged to look like used whiskey barrels. Anyone have experience finishing white oak to look like it's been sitting in barrel warehouse of 7 years? I know I won't be able to get the inconsistency of a truly aged barrels but I'm hopeful someone has played around with enough dyes to get it pretty close.

      • Like
    • 7 replies
    • 3.1k views
  16. Started by Bevans,

    I have read and learned a lot from the members on this forum and am still very much a novice when it comes to finishing and am asking for some advice/options for a project I amd completing. I made a dresser from wood I milled and dimensioned from old barn joists made of white oak. The wood is a beautiful Amber color with nice grain. I would like advice for products that will; (1) provide a similar penetrating stain and look as BLO, (2) help seal the grain pores and (3) provide a nice water based finish. I have had problems in the past when I sprayed General Finishes water based products over BLO even after waiting 10 days to 2 weeks. It looked like the BLO lifted from…

    • 2 replies
    • 2.8k views
  17. Started by Tom Cancelleri,

    I'm looking to do some table legs in a dark wood to go with a cherry table top. Pricing out Ebony is entirely too expensive to do it with. Wenge is kind of an option if I go pick it up, however ebonizing might be an option depending on which finishes I can use. My plan is to finish with Watco danish oil. I have read the way to ebonize wood is to use iron acetate on a wood with lots of tanic acid. White oak being the best option. Once the wood is sanded to 220ish, then I would ebonize it, followed by applying the finish coat. can you apply danish oil on top of ebonized wood, or do I have to sand again, or spray some sort of film finish on it?

      • Like
    • 17 replies
    • 11.1k views
  18. Started by Southwood,

    Thinking about picking up an Earlex sprayer. Which one should I look at getting? Doesn't matter if it is the best and top of the line, just good. Also what extra parts and pieces should I pickup?

    • 0 replies
    • 3k views
  19. I have a new oak-textured fiberglass entry door and would like to stain it to match the house better. I've never stained a fiberglass door before. My question is do I use a gel stain and how do I go about it?

      • Like
    • 1 reply
    • 2.9k views
  20. I just installed some beech butcher block countertops (Ikea Numerar - got in under the wire before they 1 1/2" material was discontinued.) This project was preceded by first replacing our kitchen table surface with the same Ikea butcher block (using Watco Danish Oil Dark Walnut) and replacing my office desk surface (Gel stain and Polyurethane.) Now with the corners, I have somewhat of a dilemma. I was interested in water-based dye stain originally, or a mix of water-based dye stain and wood stain, so at a local woodworking specialty shop, the fellow there convinced me to put down some Zinsser Seal Coat and 50% alcohol, so the water based dye stain would be consist…

    • 7 replies
    • 9.4k views
  21. We just purchased a home that has and older custom oak kitchen. So, I decided to take on the task of redoing it myself. Needless to say that there is ALOT of wood. They are oak cabinets with Fruitwood stain. I have stripped and sanded and sanded and sanded. It is taking me forever just to do one cabinet door and they still have an orange tone to them, just can't get it out. I am burned out and haven't even gotten thru half of the cabinets. So, I would like to use Minwax Blue Hawaii water based stain on them. Bought a can to try and it is more blue than what it looked like in the store. Question is I guess do I have to get the wood down to almost white to s…

  22. Started by Just Bob,

    We bought this property from the estate of a logger that was killed in a logging accident. He was also a chainsaw carver, and there were a number of carvings on the property. The property sat on the market for 6 years, and because of the neglect/weather most of the carvings have rotted. I was able to put bigfoot under cover and my wife and I would really like to preserve and display him. The base is rotted and I am using Minwax wood hardener to stop the rot, but I need ideas on what to use to save the rest. I am planning on using a spar varnish, but I don't know if that is the best way to go. It is very fragile and I can't clean it so I have to finish over the grim…

      • Like
    • 5 replies
    • 3k views
  23. i live in hawaii and have mold/mildew issues in general... i just had a cabin built of pine t&g 2 months ago...single wall construction... i applied 2-3 coats of clear stain/wood protectant (oil based i believe because it smelled strong and it did not clean up with water)... i made the mistake of throwing away the metal 5 gallon containers that it came in and i don't remember the kind or brand... woops (i think it was a thompson's product but i could be wrong)! ... now it is already showing mold growing on the outside of the building.... no mold on the inside yet... i am wondering what to do to get the mold off and what to appy now so that it doesn't return. i don'…

    • 2 replies
    • 2.7k views
  24. I have just finished spraying my first gallon of General Finishes Polyacrylic. I loved the water-based aspected of it. Before I buy another one, I was wondering what the difference between this and their Enduro Water Based Lacquer is? Their website keeps the "professional" Endurovar line very separated from the "retail" line, so they don't offer comparisons of these two. In fact, I was just looking at pricing, and I didn't see Polyacrylic for sale anymore? Has it been completely replaced by High Performance? Any thoughts? Thanks, David

    • 3 replies
    • 5.3k views
  25. I've just finished a side table. For a first coat I used an oil/wiping varnish mix. I added some wonderful color and just a tiny amount of vanish. Then, I left the base alone and added 3-4 coats of wiping varnish to the top only, since that's the surface that will get the wear and tear. I got it to a light sheen, but still fairly close to the wood. The final result is a nearly bare wood base with a more conventionally finished top. I think it looks good, but is there anything I should be worried about down the road? I tried to get some pictures, but you can't see the difference so I'm not including them. In short, is it "ok" to vary the level of finish …

    • 2 replies
    • 2.8k views

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.