Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Finishing

  1. Started by socoj2,

    I recently polyed 6 pieces 5 of them had drips runs and a bad case of bubbles. I have to be doing something wrong. i have watched youtube after youtube and cant come up with anything. I want to up my game. Though if i drop $500 on an hvlp system and end up with the same thing i would be pissed. Anybody around Atlanta want to play Teach Jay how to not be a finishing n00b?

    • 7 replies
    • 2.9k views
  2. I've a tabletop that is ready for finish, species rift white oak. While I should have chosen my stock more carefully, it is too late now unless I want to buy more lumber and do it over. I will use a cherry oil based stain, then a wipe-on satin clearcoat. Will a second coat of the stain over the lighter part make this look better?

    • 3 replies
    • 3.1k views
  3. Started by Pete Staehling,

    We had a speaker at our local wood workers club who is reintroducing tung oil production to the US. He doesn't really have any stock since the 2015 crop is mostly sold. The new Tallahassee area orchards are not fully mature yet so production is just ramping up. I think he said he currently has about 7000 five year old trees. Any way, I have a pint of his domestic tung oil and want to start experimenting with it on some of my mountain dulcimers. I suspect that without additives the drying may be pretty slow in the humid Tallahassee climate, so I am wondering about using Japan drier, citrus oil, or other drying agents. I also wonder about a hybrid wipe on finish that…

  4. I've built some basic pine shelve in our kitchen. So far I've painted them with a whitewash (approx 50/50 water/emulsion) and sanded them back slightly. I like the matt finish and natural wood feel they have at the moment but I would also like to give them some protection from the steam and general wear and tear they'll go through in the kitchen. I have no idea what kind of finish to go for to maintain (as much as possible) the look and touch of un-protected wood. I'm very much a novice at woodworking so any advice would be greatly appreciated. Thanks, Andrew

      • Like
    • 3 replies
    • 2.7k views
  5. Started by Jeremy Sohl,

    Hey everyone, first time here, had a question for the group. I'm building acoustic panels, sound absorption for Recording Studios, Home Theaters, music rooms, etc... I'm using Class-A Fire rated acoustic fabric... but some of the products I'm creating have an exposed wood frame. for instance i have some with a cedar, walnut, cherry, and so on. They're pretty much pieces of furniture. I'm going to be selling these to commercial retailers and commercial studios. My question is, How can I make my wood frames Class-A fire rated as well? does anyone have any experience with this? I don't want to put on any sort of fire coating thats going to ruin the finish of the pi…

  6. Started by snichols,

    My mom, bless her heart, set down a metal/plastic cup on my wife's project table and here are the results. The wood is cherry plywood sanded to 320. There are two or three coats of General Finishes Arm-R-Seal over one coat of shellac. I finished the table about three years ago. Here are my two questions: 1. Help! How do I get rid of the ring? 2. What is a durable finish for the future as I plan to build a dinning room table from solid walnut and it'll have to endure much worse than this. Thanks in advance for the help. -Shawn

  7. Hello , My name is Div , I am a fashion designer from Parsons school for design ,New York . I work with a wood sculptor based out of a small village in China . He is awesome and is making my first prototype. The wood he is working with is Birchwood, its carved and cut out. I wanted a high gloss black lacquer finish on it . I would greatly appreciate it if any experts can tell me how to go about it . to go about it. The sculptor is stuck , he is not sure about the process , whether sealant needs to be used first , whether to spray paint the small surface or to use brush . And what all is required to give it a black shiny surface . Any few tips on this would be greatly he…

  8. Started by bglenden,

    I'm thinking of getting an HVLP system and wonder if you can spray real milk paint with it? A quick search here seems to indicate that people have good luck with HVLP and GF milk paint, however my understanding is that that is not a real milk paint (no criticism, it looks awesome, I just happen to have a couple of types of real milk paint already I should use up!) Cheers, Brian

      • Like
    • 8 replies
    • 5.4k views
  9. Started by fizch,

    I just bought an Earlex 5500 a couple of weeks ago. I have never used a HVLP system before. All of my painting was done with a brush. So I bought this new system and started playing around with it. I got the latex paint that I was going to use and wasted about an hour trying to thin out the paint. I tried mineral spirits and paint thinner. Neither of which did anything to thin the paint. Then I noticed on the back of the mineral spirits that it said not use with latex paint. Then I noticed that the paint thinner said the same thing. What's the point of calling it paint thinner if it isn't going to thin paint? Well, I did a little more research and found that I should thin…

    • 4 replies
    • 12k views
  10. Started by jimmyhopps,

    I’m rubbing out a table top (yes, the same one i've asked a kazillion other questions about - still at it!). using the abralon pads as several here have recommended. amazing product. I started with 500 grit and it is all smooth, except a very thin depression/line a few inches long (see dark line in picture. this is zoomed in quite a bit). The line parallels the joint where two boards meet. The joint line was either glue or epoxy (did some one way and some the other, and i didn’t mark them unfortunately). I’m 99.99% sure that this joint line was sanded perfectly flat before i started the finishing process. The depression is deep enough that i can feel it running my fing…

    • 5 replies
    • 2.9k views
  11. Started by joev,

    I live in Arizona and do my woodworking in the un-airconditioned garage. Consequently, I sweat a lot. While apply a stain to a dresser I'm making a few drops of sweat fell onto the surface "while" I was staining and now there are a couple of sweat stains on the top of the dresser. Dresser top is make out of white oak plywood. Here's my question - Is there anyway to get rid of these sweat stains? Keep in mind that the sweat actually mixed with the stain while I was applying it. I haven't tried anything yet. Seeing as how it's made of plywood I don't think I've got a lot of room for sanding it out. HELP.

    • 1 reply
    • 5.4k views
  12. Started by Charlie Sue,

    Hello Folks, Can anyone please help me figure out this stain color on my front door? I am trying to re-sand and re-stain one side of this front door. I am including two pictures of the same door. Thanks

      • Like
    • 11 replies
    • 3k views
  13. Started by Fryguy,

    Hello Everyone I've built an outside pool house bar and bought a 2½" thick slab of maple for the bar top. The wood will be obviously exposed to the sun, but I'm having a Sunbrella side cover made for the pool house to protect the bar top from weather (rain/snow) when its not in use. I'm looking for recommendations on the best way to treat the bar top to protect it from drinks, condensation, and even some wet weather if we left it uncovered. So far, I've had suggestions to use either tung oil or McCloskey Man of War marine spar varnish, but I'm not convinced either are the right finish. Thoughts? Thanks Jeff

    • 1 reply
    • 3.1k views
  14. I'm about to wrap up a desk build soon and would like to try spraying lacquer (with my new Earlex 5500) for the finish. Marc has recommended the Sherwin-Williams CAB-Acrylic but I can't find that locally. I'm having a hard time finding sprayable lacquer so want to ask anyone that spray's lacquer, What brand do you use and where you get it? -Rich

    • 3 replies
    • 3.1k views
  15. Greetings from a newbie! I bought a bakers table to use making artisanal breads for a local cafe. It is 1 3/4" X 72" X 36". It is old, neglected and has gaps between some of the boards from shrinkage due to neglect and outdoor storage. My initial thoughts are to plane it down to a new surface, then create a mixture of fine wood dust and Titebond lll inject into the (cleaned out) gaps and cracks and sand it off. If that all works I would start oiling with food grade mineral oil. I would appreciate any thoughts or suggestions on how to get this old beast back in service. Thanks in advance. Christopher

      • Like
    • 64 replies
    • 15.7k views
  16. Started by frenchy5555,

    I have an IKEA tv hutch from ten years ago (I know...IKEA-we were poor and stupid at the time). Inside particle board. Adjustable heavy hinge on inside lower cabinet door. Child stood on opened lower cabinet door and hinge ripped out with large chunk of the particle board. I want to undo door from hinge (no problem there). My question is - which is stronger for this job - wood glue or epoxy putty (and clamp..cotton batting on outside of cabinet under clamp so as not to damage). For IKEA it's a beautiful hutch with larger upper cabinet doors and lower cabinet doors for storage. I want to fix it and sell it. I appreciate any help. First time posting...newbie...…

  17. I know I can not call Ghostbusters to get rid o this problem. The table was already finished, but a small area needed to be touched-up, but this area needed to be recoated. so I applied polyurethane. Then in a completely other area a white mottled area showed up. What can I do and why did this happen????? HELPPPPPP...Wife is on my butt about this!

      • Like
    • 11 replies
    • 3k views
  18. On a recent trip (got back last night actually) I passed by my sister's place and she has a lot of our old family furniture that she's acquired (being the "good" one). She's downsized and was looking to get rid of a lot so I told her I would take what she did not have room for. I brought a couple pieces home with me, and will arrange to ship more. For starters there's a dining room table that I am not sure of the age but it was a family piece for a while and it is important to me - as they say "if this could talk"! I have not unwrapped it yet but as you can see from the pictures I do have, there are some areas that are going to need a lot of love. The top for i…

      • Like
    • 12 replies
    • 4k views
  19. Started by wtnhighlander,

    Tried to use epoxy a a clear filler for part of an inlay, but something went wrong, and it isn't curing. Anyone know a solvent that will help remove the sticky goo? Acetone, maybe?

      • Like
    • 23 replies
    • 12.6k views
  20. Started by N00b-in-training,

    I made a quick stop at home today over lunch to slap another coat of lacquer on a couple of small items I built for my wife this past weekend. The normal bowl I use to apply finishes out of was in use with the lacquer thinner I put the brush in this AM, so I grabbed a plastic cup to use for the max of 5 minutes it would take me to apply another coat of lacquer. Well... Turns out lacquer eats through cheap off brand solo cups in about 3 minutes. The bottom of the cup fell out and gave a new definition to flooding the surface, the piece and my finishing table. Thankfully my phone was about 1 foot way and didn't get dumped on. Hopefully I don't have a lot of buffing ahe…

    • 14 replies
    • 4.1k views
  21. Started by N00b-in-training,

    I've attempted to color match a few boards to a piece of solid oak furniture in our girls bedroom. After 2 coats of stain and 2 coats of lacquer I've clearly missed on the redness front (or the original piece is red oak and not white oak like I used). I plan to buff it out and apply a wax to get the sheen just right, but anything I can do at this point to get it closer? Sent from my iPhone using Tapatalk

    • 4 replies
    • 2.9k views
  22. Started by Jgr327,

    hello, I'm new to this site and looking for some advice. Im a jr wood worker and making my first table. I got some cedar from a buddy that was milled up like 20 years ago. Im making a dining table out of it. Im finding out that cedar is a very soft wood, but it doesn't matter. I am alright with some dings and dents. The table top is already done, but Im having some issues finding a finish that will not cause the wood to darken. This is what I did on scrap. I used a torch to burn the top a bit and then brushed it off. I really like the colour and the feel the burning does. My issues is when I apply any finish to it its causing the wood to darken a lot. I wo…

      • Like
    • 6 replies
    • 8.8k views
  23. Started by Duckduckcuse,

    Hello, Sanding down to bare wood. How do I get a golden amber, which was the original finish color on beech wood. Tried oiling but leaves it too light. Should I try gel stain, tinted oils? Can I stain lightly then oil? Would just lacquer bring this out? I do like the oil look. Thanks a ton. Paul

    • 2 replies
    • 4.2k views
  24. Started by Denette,

    I'm working on this: And need to stain it to match a porch swing. I bought an oil-based deck sealer - this: http://www.lowes.com/pd_550048-86-8010101___?productId=50146500&pl=1&Ntt=olympic+elite+semi-transparent+exterior+stain and was wanting to make sure that this would be okay to use on a cypress chair, and not weather poorly (it's deck furniture) and not leave people with Cedar-tinted butts after replacing in the chair for a while.

      • Like
    • 14 replies
    • 9.1k views
  25. Started by rodger.,

    It am trying to colour some QSWO black/ebony/espresso and I am not having a lot of success. I have coloured loads of ash with great success, but this oak is not behaving as nicely as the ash. I have tried two different products - both wiping a stains. One is water based, and the other solvent based. The colour is not as dark as would have expected, and the flecks are not popping very well. I think I will pick up some black dye and try that next. Any suggestions? Looking for a black colour, with the flecks showing well. Is this unrealistic? I'll post some pics of sample boards when I get a topcoat on tomorrow. I looked into transtint, but I can't get it here…

      • Like
    • 22 replies
    • 5.3k views

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.